Error message while confirming production order.

Hi Gurus,
I would like to know if it is possible to get an error message when we try to confirm a production order if there is not a cost for each component.
Please provide details if any.
Thanks for your understanding.
Naveen.A

Hi,
You can have setting for error message for incorrect costs in confirmation as below :
Go to OPK4 ( Parameters for order confirmation) select plant & order type--> General individual entry ( tab)-> Error handling/logs
Maintain tick in check box for Termination for Incorrect ActCosts.
This will fulfill your requirement.
Revert in case any doubt.
Regards,
Tejas
Edited by: Tejas  Pujara on Apr 6, 2009 7:17 AM

Similar Messages

  • Price error message while creating production order- Urgent

    In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
    I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
    Thanks

    Please confirm where i should check for Activity price?
    But then why we are able to get error message.
    Reexplain:
    Creating a production order which do not have standard cost in material master.
    While saving, getting a error message'No price could be determined.......'
    Now changing the message to Warning through configuration using TC: OPR4_PPCO
    Now again creating the production order and saving
    Expectation to have same message as warning but not getting anything.
    Thanks
    Edited by: vineet garg on May 1, 2008 12:14 AM

  • How to avoid actual cost error log while confirm production order activity

    Hi
    I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm in CO11N, system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

    Hi
    Issue is resolved thru PP forum. Thanks for ur reply.
    Solution lies in Control key of routing and BOM costing relevancy.

  • How to avoid Cost error log  while confirming production order

    Hi
    I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

    Sudhar,
    You can make the operation not relevant for Costing by using a Customized Control key which is not relevant for Costing or else in the operation details you need to leave the "Costing relevancy" field blank.
    Regards,
    Prasobh

  • Error message while creating production order with KMAT material strategy25

    Hi PP Gurus I am running variant configuration cycle...Strategy 25, Custermer Req KEK (KMAT Matrl)
    Sales order & MRP Picked the components correctly as per the dependencies
    written. So Planned order generated against sale order.
    When I tried to convert planned order to Production order...I am getting the
    below error message..
    Error Message:
    You cannot make an assignment to make-to-order stock Message no. CO684
    Diagnosis The component cannot be allocated to an individual stock because
    make-to-order production and engineer-to-order production cannot be executed
    with this order.
    A possible cause is that you are trying to create an order with reference to a
    sales-order/project, where an account assignment to a sales order/project is not
    allowed in the settlement profile that is assigned to the chosen order type.
    This is inconsistant.
    System response The following responses are possible:
    Order processing is cancelled.
    The system resets the special stock indicator back to the original value.
    Procedure Choose another order type.
    I used order type with SD1 as settelement profile.
    OVZG: default 046, settlement profile = SD1
    OPJH: Settlement profile = SD1
    Plz through some light on this if u have worked on Variant Configuration/MTO
    settlements.
    Question:
    1) Is creation of production order with KMAT material supported by SAP?
    2) If yes, why the above error occurs?
    Waiting for Ur reply
    With Best Regards

    Dear R.Brahmankar,
    I have check on the note, but it is not relevant to ecc6. The current system default setting is :
    Standrad setting for reqt class 046
    Special Stock E
    Acct Assgt Cat. M
    Valuation M
    Settlmt Profile SD1
    However if I change the Acct Assgt Cat. from M to E. It resolve the problem. I would like to know is this the right solution?
    Config in Acct Assgt M
    Consumption Posting = E
    Config in Acct Assgt E
    Consumption Posting = '  '
    In F1 key of Consumption Posting field it shown following:
    To flag the sales order item as cost- and revenue-carrying, enter an "E" (settlement via sales order).
    If you do not wish to flag the sales order item as cost- and revenue-carrying, do not enter anything.
    Dependencies
    If you are working with nonvaluated sales order stock, always flag the sales order item as cost- and revenue-carrying.
    If you are working with valuated sales order stock:
      In the case of complex make-to-order production, flag the sales order item as cost- and revenue-carrying
      In the case of sales-order-related mass production, do not flag the sales order item as cost- and revenue-carrying
    Should we change to E?
    Regards,
    Ong

  • Error message while viewing Purchase order summary

    Hi all,
    we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
    is it beacuse of currency not popluated in Purchase order?
    Verified metalink note - 960504.1
    Thanks
    Kiran

    Hi Kiran,
    Verified metalink and other areas but could not get any appropriate solution.
    I tried to reproduce the issue in various available environments...but no luck!
    My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
    Please check with your DBA for this patch in test instance.
    Thanks
    -Arif.

  • USER IS GETTING ERROR MESSAGE WHILE DOING PM ORDER COLLECTIVE CONFIRMATION

    Dear,
    i have query from my client that user is getting error message " no status object is available for cre o/o/o while doing pm order confirmation. My client is using sap MRS . I Recommend the client to run program ZKBEDREP in se38 and still they are facing the same error.Can any body help me in solving this.

    Hi,
    Please see if this thread helps
    System status not avilable for one of the component - Conf. can't be done
    Regards,

  • Deleated Valuation Type --Need Error Message while creating Purchase Order

    Hi,
    In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
    In current configuration , it's not there.
    Await your expert opinion.
    Regards
    Shyam Kogta

    I investigated this recently in our company and gave this answer:
    A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
    The archiving run then checks if a deletion is possible or not.
    So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
    To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.  
    In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
    Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
    There is one for goods receipts (but only for a certain industry solution that is not used by us)
    There is one for deliveries ( VL 211 ).
    The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type  ABC , while an internal order (production) gets the DEF.  Usually there should not be a need to change this valuation type manually.
    So the only solution is to archive the material master at valuation type level.
    But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
    And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

  • Regarding Error Message while releasing Process Order

    Dear friends,
                              While releasing process order i m getting following error message.
    " Storage location in PUB(loc1) is not same as storage location (loc2)''.
    how to remove this error and release the order.
    Thanks & regards,
    Sandip Sonar

    Hi Sandip,
    The error message LP 099 'Stor. location in PUB X is not the same as prod.stor. location Y' is issued when the system finds  inconsistancy in your customizing of the couple storage location - Production supply area for your components in your process order.                                                                               
    The logic of the storage location determination is the following ...
    The issuing storage location is determined in three steps:                                                                               
    1. First, the issue storage location of the material to be issued   (MARC-LGPRO) is transferred to the material master from the  MRP    data if it is filled.                                                 
    2. The system overwrites this value with the issue storage location from the bill of material (RC29P-LGORT, STPO-LGORT) if it is     filled.                                                               
    3. If the operation to which the component is assigned in production  order contains a work center with supply area, the storage    location is transferred from this supply area (PVBE-LGORT).     However, this transfer is only carried out if storage location  data (MARD) is maintained for this storage location for the    material.                                                                               
    The logic of the supply area determination:                              
    Priority of supply area determination for WM staging is as follows :     
    1. Supply Area of Work Center               (highest priority)   If no supply area defined look to                                     
    2. Supply Area in item of Bill of material  (second priority)   If no supply area defined look to                                     
    3. Material Master View MRP2                (third priority)         If no supply area defined -> Error message LP 099                                                                               
    I hope this helps in sorting the issue.  
    Regards,
    Mauro

  • Error Message while confirmation

    Hi Gurus ,
    While doing confirmation i am getting this error  ' Plant 1000 is not the only plant assigned to valuation area 1000' It the error ask me to exist . Because for taht i am not able to confirm the porodcution order .
    I have define the new order type for the plant .
    Please provide me solution for that
    Satish

    Hi
    Please ensure the below points while creating  new order  type
    1.Order dep.Parameters ( OPL8)
    2.Define Confirmation parameters (OPK4)
    3.Availability Checking cont. (OPJK)
    4.Number range for the order.
    Please check the above points with your order type , Hope this will help you
    thanks
    sekhar

  • Error message while printing sales order

    The following message was displayed while trying to print a sales order from a particular computer.  Logging in on another computer with the same credentials worked fine.  any thoughts?
    Error in file Temp (bea4fc21-346f-4d31-93d6-8260b04be0a4)-(B002A516-3EB2-47FF-BAE7-3941126D5257).rpt:
    Error in formula Record Selection:
    ‘(OCTG.GroupNum) = (?Pm=OQUT.GroupNum)’
    This field name is not known
    Details: errorKind

    Hi,
    Similar error found with different layout. Check SAP note,
    1830583 - Error message pops up when printing or previewing
    marketing documents with items managed by batches via CR layouts
    Thanks & Regards,
    Nagarajan

  • Error Message for new production order type

    I have created a new production order type and gone through all the configuration requirements that I'm aware of.  In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
    No reference document type defined for order type ZRWK
    Message no. CO179
    ZRWK being the new order type.
    I've searched through many posts and found nothing relating to this message.  Hopefully someone has encounted this before.
    I'm sure I've missed something, but can't pinpoint what it is.
    Help is greatly appreciated.

    Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
    The path is Print - Print Settings - Configuration Menu.
    Diego

  • ERROR message while posting SHIPMENT order

    Hi all,
    i have developed one program which can create a shipment order using BAPI_SHIPMENT_CREATE.After uploading, i have passed all the data to this FM.
    in my return parameter, i am getting only error message number & type of message but message  is blank.so it is very difficult to know what is the actual error.
    my error is like below
    message type -warning
    message no.-000
    message- (it is blank)
    i am getting 3 error message numbers. all are 000.so how could i solve this error.plz suggest.
    Regards
    pabitra

    Hi vasanth,
    Thanks for ur help. but i am getting only message no & type of message.message ID is also blank.i tried to find this message by debugging but can not succeed.
    type of message--warning
    message no--000
    so, how to find this message.plz suggest.
    Regards
    pabitra

  • Error message while creating transfer order

    Hi Experts,
    My objective is to create a transfer order from a transfer requirement programatically.
    I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM  L_TO_CREATE_TR to create a transfer order.
    But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
    Please tell how to solve this.
    Thanks,
    Sangeeta.

    Hi,
    Check whether following link is helpful
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
    Regards,
    Dhana

  • What is t-code or path see the error message while creating Purchase order

    Hi,
    I am creating PO and I have not maintained Info Record.While cretaing PO it is throwing warning message.Now I want to convert this to error message.How to do this.
    Regards
    Raghavendra Pai

    Hi,
    You can alter the message at SPRO->Materials management->Purchasing->Environment data->Define attributes of system message.
    Here in the system message, go to  message number 341, then change category from W to E.
    Regards

Maybe you are looking for