Error message while creating Overwrite exit for a standard class method.

Hi,
   I was trying to create an overwrite exit in class CL_HRTMC_AC_TA_DASHBOARD for method GET_DEVPLAN_ASSESSMENTS. I created an Enhancement Implementation first. But when I tried to insert Overwrite exit method, I got error message that "The class has not yet been converted to the new class-local types" . In the toolbar->Utilities, I saw an option "Convert Class-local types" and when I clicked that it asked for the Access key. Eventhough I cancelled the process, now I am seeing some inactive parts in from this class in my Inactive object list. When I try to activate, it's again asking for access key and not able to activate it.  Not sure what has actually happened. Is it possible to revert it to old form? Please advice!
Thanks,
Mahesh Nair.

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Similar Messages

  • Error message while creating configurable material for variant configuration.

    Dear All,
    I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
    Regards
    Akula Sivaji Kumar Madhu Kiran

    If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
    In MMNR, Click on the Edit Group.
    Then select the material type and click select element.
    Then mark a tick option in another group and then press Element/Group.
    Then you can see the material type will come under this group.
    Now save your entry, and create a material with this material type.

  • Deletion marked material should give error message while creating proc ord

    Hello,
    i had marked the material for deletion through T-code MM06 & saved.
    Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
    But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

    Yes Brahman is Right,
    Check the followig..
    Go to OMCQ and change the message category  to E- Error message instead of W- Waring message in Message no M7 127, but
    not  M7 121.
    and check it,
    Regards,
    Pavan idlur.

  • Error Message while creating connection pool

    Hi all,
    I got the following error message while creating connection pool for the
    SQL Server thru the Application Server Admin Console.
    The message is,
    An error has occured.
    Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
    JdbcConnectionPool Already Exists: cannot add duplicate.
    But the connection pool for the SQL Server was not there in the list.
    What may be the possible reason for this error.
    i was trying to deploy a BMP entiy bean using the Sun Application Server.
    Prior deploying i just tried to create connection pool and test the connection using the Admin Console
    Please help me by providing a solution.

    Kriti Sundar Mazumder wrote:
    Hi
    I am getting an following error message, while creating database connection pool
    in weblogic 7.
    "<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
    pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
    Error allocating DB2 environment handle, rc=-1.>"
    Can anyone help me out in this regard
    Regards
    KritiHi. I am no expert, but it sounds like a problem with the privileges the user
    has... The best thing is to step back to a simpler environment. Can you try
    connecting to DB2 with a simple program like utils.dbping? Please look at our
    driver docs for the DB2 driver, because there are several variations in connect
    properties depending on the type of DB2 you are connecting to...
    Joe

  • Unable to capture error message while creating an SO using bapi

    Hi,
    Can anybody suggest how to capture the error message while creating a SO using BAPI.
    I have developed a customeized BAPI and using the BDC format to create the SO.
    Note: i am using a call transaction method for the BDC.
    I am sending the message into message1.
    but i am unable to send the same into an internal table
    shyam.

    Hi Shyam
    If my understanding is correct, you are performing BDC process within the customized BAPI...
    And you want to collect the messages from BDC to an internal table and pass to the output.
    Proceed as below:
    1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
    2. Now the messages will be collected in ita.
    3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
    4. Collect to the returning table.
    Hope this helps...
    Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
    Kind Regards
    Eswar

  • Error message while creating Appropriation Request

    Hey there,
    I am getting Error message while creating Appropriation Request.
    I have done all the confiig according to SAP Best Practices U30 Investment Management.
    When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
    Any help would be greatly appreciated
    RAISE_ exception
    Runtime Errors         RAISE_EXCEPTION                                                            
    Date and Time          18.07.2011 07:15:07                                                                               
    ShrtText                                                                               
    Exception condition "ERROR_IN_STATUS" raised.                                                                               
    What happened?                                                                               
    The current ABAP/4 program encountered an unexpected                                         
         situation.                                                                               
    Error analysis                                                                               
    A RAISE statement in the program "SAPLAIA_TOOL" raised the exception                         
         condition "ERROR_IN_STATUS".                                                                 
         Since the exception was not intercepted by a superior program                                
         in the hierarchy, processing was terminated.                                                                               
    Short description of exception condition:                                                                               
    For detailed documentation of the exception condition, use                                   
         Transaction SE37 (Function Library). You can take the called                                 
         function module from the display of active calls.                                            
    Trigger Location of Runtime Error                                                                
         Program                                 SAPLAIA_TOOL                                         
         Include                                 LAIA_TOOLU11                                         
         Row                                     119                                                  
         Module type                             (FUNCTION)                                           
         Module Name                             AIA_TOOL_GET_STATUS                      
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    89 *                TYPE       = SY-MSGTY                              
        90 *                CL         = SY-MSGID                              
        91 *                NUMBER     = SY-MSGNO                              
        92 *                PAR1       = SY-MSGV1                              
        93 *                PAR2       = SY-MSGV2                              
        94 *                PAR3       = SY-MSGV3                              
        95 *                PAR4       = SY-MSGV4                              
        96 *           IMPORTING                                               
        97 *                RETURN     = ls_return.                            
        98 *   endif.                                                          
        99 *   if not ls_return is initial.                                    
       100 *      append ls_return to return.                                  
       101 *      raise error_in_status.                                       
       102 *   endif.                                                          
       103 *                                                                   
       104 *  Füllen der Ausgabetabellen                                       
       105    perform fill_output_tables tables lt_status                      
       106                                      lt_jsto                        
       107                                      et_appreq_status               
       108                                      et_appreqvarnt_status          
       109                                      et_appreq_user_status          
       110                                      et_appreqvarnt_user_status     
       111                                      lt_objnr                       
       112                                      lt_objnr_varnt                 
       113                                      lt_return                      
       114                               using  i_language                     
       115                                      i_with_text.                   
       116                                                                     
       117    if not lt_return[] is initial.                                   
       118       append lines of lt_return to return.                          
    >>>>>       raise error_in_status.                                        
       120    endif.                                                           
       121                                                                     
       122                                                                     
       123 ENDFUNCTION.

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

  • Error message while creating or editing a report

    Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
    Crw32.exe has enconutered a problem and needs to close.
    Is there a patch available or what can we do?
    Thanks.

    Hi Lucus,
         This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again.  If you still get the error, I would call the support number, and let them help you out.   You may need to know,   the type of PC or server the software was installed on, the current os, available memory... etc    For now, I would go to windows (If that is what you are running ) and re-install or repair the software.

  • Error message while creating an inbound delivery to generate an idoc

    hi,
    i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
    ." No recipient could be determined for object BUS2015 method SAVEREPLICA"
    Procedure for System Administration
    The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
    need help
    regards
    leo

    Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
    Also sometimes search for OSS notes by the message class and number helps.

  • ERROR Message while creating Rebate condition record T code VBO1

    Dear Experts,
    I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
    Please give the solution to create condition record.
    Regards
    siva

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

  • Error message while creating database

    Log error
    while creating new database
    Robot-properties
    XML Parsing Error: junk after document element
    Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
    Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
    I have created my new search engine .
    and the robot is not running.I getting log error.
    and no directory is created with the search name.
    please help me with the fields..
    creating search server..
    required Port:
    required Configuration Name:
    Required Instance:
    *Web Container Administration*
    Required Administration Host:
    Required Administration Port:
    Required Administrator:
    Required Administration Password:
    *Web Container Directories*
    Required Install Directory:
    Required Instance Directory:
    Required Document Root Directory:

    Kriti Sundar Mazumder wrote:
    Hi
    I am getting an following error message, while creating database connection pool
    in weblogic 7.
    "<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
    pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
    Error allocating DB2 environment handle, rc=-1.>"
    Can anyone help me out in this regard
    Regards
    KritiHi. I am no expert, but it sounds like a problem with the privileges the user
    has... The best thing is to step back to a simpler environment. Can you try
    connecting to DB2 with a simple program like utils.dbping? Please look at our
    driver docs for the DB2 driver, because there are several variations in connect
    properties depending on the type of DB2 you are connecting to...
    Joe

  • Warning to Error Message while creating Shopping cart

    Hi,
    How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
    Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
    Thanks and Appreciate your inputs.
    Regards,
    RK

    Hi Richy,
    The cost centre which you have maintained is locked for postings. Try to change the cost center and the warning message  should be gone.
    If you still want to chnage the message from warning to error,you can do in SPRO-->img->SRM->SRM Server -> Cross app basic settings->message control -> Influence message ctl.
    If an entry doesnt exist for this message in SPRO,make an entry in view BBPV_PDMSG (Tranx: SM30).
    See these related threads for more pointers:
    Re: Error Messages in BBP_PD
    Re: How to change an error message to a warning message in SRM
    Re: Where can I change type of message BBP_PD 083 from warning to error
    BR,
    Disha.

  • Warning to error message while creating a SC

    Hi,
    How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
    Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
    Thanks and Appreciate your inputs.
    Regards,
    RK

    Use the BBP_DOC_CHECK_BADI.
    1. Get the backend message with a getmessage* FM.
    2. Check if it's a closed cost center warning.
    3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
    Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
    Regards,
    Robin

  • Save Query - An error occurred while creating connection strings for the query

    A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

    I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

  • I am receiving an unexpected error message while attempting extract updates for Lightroom 5

    I am receiving an unexpected error message while attempting extract updates for Lightroom 5

    I am using Windows 7, however, since posting the original message I have solved the problem by deleting my old Lightroom 4 download file from my download folder.  Thank you for your response.
    Sent from my iPad

  • Pre,Post,OverWrite Exit for web dynpro ABAP methods of component,view

    Hi,
    my question is i have created overwrite exit for method of component controller in one enhancement implementaion say ENH1, and i also created overwrite exit for same method in another enhancement implemenation say ENH2, it means i have two different implemenations now, 
    My questions here is, will both Enhancement implemenations will "execute", if yes in what order..
    Please clarify.
    Thanks.

    I'm afraid the information that Manas gave you is incorrect.  In an overwrite method, the enhancement completely overrides and replaces the original method.  Both versions are NOT executed.  This is the risk you run with the Overwrite enhancement - you are choosing to completely replace the SAP delivered logic. 
    From the Online Help:
    The overwrite exit method takes on the signature of the original method and overwrites it.  This means that an overwrite exit is executed instead of the original method.
    At runtime only one overwrite exit can be active. If several overwrite exits are active, a runtime error occurs.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/dc/e6ba426b81da11e10000000a155106/frameset.htm

Maybe you are looking for

  • ITunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?

    iTunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?  And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to

  • BCS passing dynamic inputs to methods & calling using in O365

    Hi all , I have a requirement to pass dynamic values to BDC methods & retrieve data, for this I have created a BDC model file(which has SQL server as external source) with GenericInvoker methods & upload same to Admin central. how do we access these

  • Olap variable in rsbbs

    Hi, I am a newbie to configuring jumptargets in RSBBS. I have got a query that pulls all line items from R/3. I want to change the field assignment to pull data from OLAP variable. How can i do that ? Thanks in advance.

  • Using nested types

    Sorry if this is the wrong forum I am having trouble understanding how to access oracle nested objects from my jdbc connection so would be greatful for any advice so thanks in advance. I want to do something like this : create type temp_bill_type as

  • Data Modelling/BW Data Architect

    I am supposed to do Data Modelling. What are the key steps to do data modelling. for financial ap, ar, gl,co. Thanks Michelle