Error message while CREATING PO - PGrp could not be determined
Hi all,,.
We are on SRm 7. ECS.
The issue we are facing is:
WHen I click on CREATE PURCAHSE ORDER trasnaction,I get this message "Purcahsing group could not be determined;Inform system administrator".
Edited by: nmsrm1234 on Nov 10, 2011 2:09 AM
Hello,
The error is coming because to create PO directly you have to be a Purchaser,you need to belong to a purchasing group in SRM.In PPOMA_BBP Assign your user id below a purchasing group directly or right click the present position and go to 'Assignment-->Purchaser Assignment', select a purchasing group and save.
Then Try creating now a purchaser order directly .
Regards,
Neelima
Similar Messages
-
Error message: the appropriate pricing procedure could not be determined
Hi SAP friends,
What does this error message means please?
The appropriate pricing procedure could not be determined because no entry with keys 'M100 20 P1' 'A' '1' exists in table 683V.
Tcode: VA01 (sales order).
Regards,
Bahia.Hi Bahia,
This error means the pricing procedure has not been done.To assign your pricing procedure to sales area go to the transaction "OVKK" and specify sales org/dist channel/div/document pricing procedure/customer pricing procedure and the defualt condition type. This would solve your problem.
Regards
Ram Pedarla -
PY error message - EE's salary group could not be determined for Plan Life
We are running through Payroll errors when there is a Separation action being carried :
u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
On IT0168 the costs are u20180u2019
This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.During the "Separation" action, does the employee change WT on IT0008?
If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans) -
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-AHow should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A -
every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."
Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?
-
Time Machine error message: The backup disk image could not be created
I got a new MacBook the other weekend and Time Capsule. I have set up the time capsule, its light is green, it shows up as a device in my finder window and the printer it shares is accessible.
The problem is when I try to run time machine I get the error message "the backup disk image could not be created" I have the time capsule selected as the drive I want to back up to. I have read through all 150 help topics on the Mac Support page regarding time machine and am now turning to you the community to help!I found an answer in another place on this forum...http://discussions.apple.com/thread.jspa?threadID=1422065&tstart=330
Just have to give my computer a name under system preferences/sharing -
Unable to capture error message while creating an SO using bapi
Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar -
Error message while creating an inbound delivery to generate an idoc
hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leoInbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps. -
ERROR Message while creating Rebate condition record T code VBO1
Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
sivaHi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
Deletion marked material should give error message while creating proc ord
Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur. -
Error message while creating Appropriation Request
Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors RAISE_EXCEPTION
Date and Time 18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
condition "ERROR_IN_STATUS".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLAIA_TOOL
Include LAIA_TOOLU11
Row 119
Module type (FUNCTION)
Module Name AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 * TYPE = SY-MSGTY
90 * CL = SY-MSGID
91 * NUMBER = SY-MSGNO
92 * PAR1 = SY-MSGV1
93 * PAR2 = SY-MSGV2
94 * PAR3 = SY-MSGV3
95 * PAR4 = SY-MSGV4
96 * IMPORTING
97 * RETURN = ls_return.
98 * endif.
99 * if not ls_return is initial.
100 * append ls_return to return.
101 * raise error_in_status.
102 * endif.
103 *
104 * Füllen der Ausgabetabellen
105 perform fill_output_tables tables lt_status
106 lt_jsto
107 et_appreq_status
108 et_appreqvarnt_status
109 et_appreq_user_status
110 et_appreqvarnt_user_status
111 lt_objnr
112 lt_objnr_varnt
113 lt_return
114 using i_language
115 i_with_text.
116
117 if not lt_return[] is initial.
118 append lines of lt_return to return.
>>>>> raise error_in_status.
120 endif.
121
122
123 ENDFUNCTION.Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Error Message while creating connection pool
Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
Error message while creating database
Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
I have bought several tv seasons from the itunes store. Recently some episodes will not sync with my ipad. The error message is that the file "could not be read or written". Previous episodes of the same series synced successfully. Also while watching the same episode on my laptop (Mac Book Pro) it freezes.
I had this same message appear today when i was putting new music on my ipod touch 4th gen. The only difference is that I wasnt using an external drive. I was using the one on my computer. This is the first time i have had this problem
Maybe you are looking for
-
what a crock of crap i tunes is followed instructions to get music off i pod on to new laptop lost 5.2 days of music can any one help please ?
-
User keeps loosing settings on her iPad
Hi Guys, I have a user that regularly says she has lost her settings on her iPad, its as if she has removed the profile which does require authorisation. We push these through our Mac OSX 10.9 Server , so its simple enough to re apply. She swears she
-
Unable to delete anything...
When i drag something to the waste the trash ask my password and then "delete" the file: basket empty. BUT the file are still on the computer and in the process it cost me some K of space on the hard drive. When i run see all file : The deleted file
-
DSP4 Cannot be installed on this computer message??
trying to install dvdsp4 but it comes up with the following msg DSP4 Cannot be installed on this computer. This computer does not meet the requirements to install this software. im on 10.4.4 with qt 7.0.4 - final cut studio requires this so dont see
-
Installing firefox brings up internet explorer script error
I've clearly installed some kind of malware, etc... Now, I'm trying to install firefox completely new and right upon startup, directly after asking if I want to run the install I get a popup "Internet Explorer Script Error" An error has occurred in t