Error Message while cretaing a Process Order

Hi all,
While trying to created a Process order I am getting this message.
You cannot make an assignment to make-to-order stock
Message no. CO684
Diagnosis
The component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistant.
Please advice.

Dear,
Go to t-code OKKP and clicking sales order check box First enter into OKKP t-code then select your the controlling area, then select activate component controlling indicator double click on it ., then you will found sales order check box.
In addition to that please check these Note 307059 and Note 317715 and 432109, 861670.
Please try and come back.
Regards,
R.Brahmankar

Similar Messages

  • Error message while saving a sales order "Product 10069995 does not have sc

    hi Friends,
    i am creating an order , enter the material,quantity, batch , correct price everything etc etc. while saving the order it gives an error message "Product 10069995 does not have schedules assigned"

    Hi Suman
    Use transaction code OMJJ and check the "Allowed Transactions" for customizing movement types.
    Kalpesh

  • Error message while saving the sales order

    hi all,
    i have maintained a material material master, sold to  etc  pr00 conditions maintained, schedule line is determined correctly  but i am still getting this message while saving the order
    "Product 234345 does not have schedules assigned. Contact system administrator
    Message no. ZV276"
    can anybody help?
    Sa

    Suman,
    i would suggest you please sit with your abaper he can might be solved your issue.
    because Message no. ZV276 seems to be comes from user-exit which you implement for VA01/VA02 Tx.
    Amit.

  • Warning Error message while scheduling the Process Chain

    Dear All,
    I have created the meta Chain, which contains 7 Local Chains. I have tested this chain in BI Development and Quality. It was working fine. I have moved this Meta Chain to production. While i am trying to schedule this chain, i got the warning message.
    Too many parallel processes for chosen server BICI
    Message no. RSPC118
    Diagnosis
    On the server TVSBICI you have chosen, there are only 0 batch processes available. The process chain has been designed in such as way that 3 processes must be processed parallel.
    System Response
    Only 0 processes can be processed parallel. Note also that to be able to start sub-chains, AT LEAST TWO free batch processes must be available. Otherwise a lock situation may arise.
    For more information, see SAP Note 621400.
    Procedure
    Reduce the number of parallel processes in the chain or include sub- chains. This warning applies to all relevant processes.
    Procedure for System Administration
    Increase the number of batch processes available. You should note however that it makes no sense to set up more batch processes than there are CPUs on server BICI.
    Pls help on this issue.
    Thanks,
    Siva.
    Edited by: Siva Kumar on Jun 15, 2009 9:16 AM

    I have Ignored this warning and now process Chain is working fine.
    Thanks,
    Siva.

  • Error while creating a process order

    Dear Guru's
    While creating a process order ,i am facing an error.
    "Unable to create batch. Storage location BPSS is invalid for material 112100050
    Message no. 40116".
    How to assign specific storage loaction to that particular material.I have assigned in material master "work scheduling tab",But it was throwing an error while doing process order.Pls help me to solve this problem.
    Thanks in advance,
    Rgds,
    cherukuri

    Hi Cherukuri
    Are u using special procurement key "80"? It seems that storage location is not mentioned for the header material in the production plant.
    Maintain this using T Code MMSC. It will solve ur issue
    Rgds

  • Error while releasing the Process order

    while releasing the Process order i am getting the follwing error message
    Message no. CO118      Release of order not possible
    Cna you Please any body explain me detail of thi error ie where the error lies.
    Thanks

    Hi,
    In Process Order Header Screen Go to ---> Log ---> On Release.Here you will find the detail error behind this problem.Go though it .Resolve it and then try to release the Process Order, and if required get back to us.
    Suppose reason may be,
    - Missing part
    - Missing Capacity
    - Batch Determination is required to perform.
    - Any User Exit (Other then std. SAP)
    Regards,
    Dhaval

  • Error message while activating ODS ZFI_ORD( FI Order Details)

    hi ,
    I am getting this error message while activating  the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
    " . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
    Thanks,
    Pooja

    Hi
    Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
    Data Target Request can be Deleted by making it Red. Edit at PSA
    /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 u2013 "Allowed characters in the BW System"
    Sample cleansing routine (#)
    Help loading  char EQUIP#1111#TAG#3311  SN#A01040          *     into Cube
    Hope it helps and clear

  • Error message while viewing Purchase order summary

    Hi all,
    we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
    is it beacuse of currency not popluated in Purchase order?
    Verified metalink note - 960504.1
    Thanks
    Kiran

    Hi Kiran,
    Verified metalink and other areas but could not get any appropriate solution.
    I tried to reproduce the issue in various available environments...but no luck!
    My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
    Please check with your DBA for this patch in test instance.
    Thanks
    -Arif.

  • Error Message while doing Order CLSD

    Hi,
    I am getting error message while doing Order CLSD...
    Error Msg: Invalid cost element(XXXX) for reservation item 010.
    please suggest me...how to solve this issue.
    regards,
    Venkatesan Anandan

    Hi Venkatesan,
    I had replied and asked for one clarrification and to check same at your end.
    Is your Cost Element mapping done with cost cost center used in order settlement rule.
    Also check for Material Master Change document for Valuation Class change and revert back in this thread.

  • Unable to capture error message while creating an SO using bapi

    Hi,
    Can anybody suggest how to capture the error message while creating a SO using BAPI.
    I have developed a customeized BAPI and using the BDC format to create the SO.
    Note: i am using a call transaction method for the BDC.
    I am sending the message into message1.
    but i am unable to send the same into an internal table
    shyam.

    Hi Shyam
    If my understanding is correct, you are performing BDC process within the customized BAPI...
    And you want to collect the messages from BDC to an internal table and pass to the output.
    Proceed as below:
    1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
    2. Now the messages will be collected in ita.
    3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
    4. Collect to the returning table.
    Hope this helps...
    Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
    Kind Regards
    Eswar

  • Deletion marked material should give error message while creating proc ord

    Hello,
    i had marked the material for deletion through T-code MM06 & saved.
    Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
    But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

    Yes Brahman is Right,
    Check the followig..
    Go to OMCQ and change the message category  to E- Error message instead of W- Waring message in Message no M7 127, but
    not  M7 121.
    and check it,
    Regards,
    Pavan idlur.

  • Fiscal Year Not allowed while creating the Process order (COR1)

    Hi Friends,
    My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
    The Diagnosis shows as below
    Fiscal year 2010 is not allowed
    Message no. F5568
    Diagnosis
    The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
    System Response
    Error.
    Procedure
    Correct the fiscal year entered.
    I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
    Can any one help me where the setting is missing or what whould be the probable reason for this issue.
    Regards,
    Deva

    Hi Prakash,
    Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
    We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
    Is there any other probablity the date is picking from any Production related set ups??
    The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
    Is there any other possibility of the missing settings or problem in date control???
    Regards,
    Deva

  • Error Message while making PO

    Hi,
    I got a error message while creating PO.
    "No short text maintained in language DE(Please re-maintain material)"
    How to go with this?
    Regards

    Hi,
    check MMR language........
    Or
    use this path
    SPRO-MM-Purachsing- Meassages-Define Texts for Purchase Order
    Here maintaion  text  for Header and item for document item (EKKO,EKPO for ur doc type)and save.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on May 14, 2008 12:22 PM

  • ORA-12705 Error Message while trying to connect to the DB

    A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
    ORA-12705: invalid or unknown NLS parameter value specified
    Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
    Any clues ? I am clueless at this point.

    This can occur with any NLS_ environment variable of registry value.
    Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
    You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
    The order of precedence is environment variable, registry, Oracle provided default.
    To find out what is going on set every NLS related environment variable to the empty string.
    In sqlplus
    select * from v$nls_valid_values
    will show you what can be set,
    This error will also occur when you installed the software with English as the only language.
    SQL developer doesn't use tnsnames.ora
    The new tnsname entry has nothing to do with it.
    You have an incorrect environment variable or registry value somewhere
    (in HKLM\software\oracle)
    Sybrand Bakker
    Senior Oracle DBA

  • Error message while creating Appropriation Request

    Hey there,
    I am getting Error message while creating Appropriation Request.
    I have done all the confiig according to SAP Best Practices U30 Investment Management.
    When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
    Any help would be greatly appreciated
    RAISE_ exception
    Runtime Errors         RAISE_EXCEPTION                                                            
    Date and Time          18.07.2011 07:15:07                                                                               
    ShrtText                                                                               
    Exception condition "ERROR_IN_STATUS" raised.                                                                               
    What happened?                                                                               
    The current ABAP/4 program encountered an unexpected                                         
         situation.                                                                               
    Error analysis                                                                               
    A RAISE statement in the program "SAPLAIA_TOOL" raised the exception                         
         condition "ERROR_IN_STATUS".                                                                 
         Since the exception was not intercepted by a superior program                                
         in the hierarchy, processing was terminated.                                                                               
    Short description of exception condition:                                                                               
    For detailed documentation of the exception condition, use                                   
         Transaction SE37 (Function Library). You can take the called                                 
         function module from the display of active calls.                                            
    Trigger Location of Runtime Error                                                                
         Program                                 SAPLAIA_TOOL                                         
         Include                                 LAIA_TOOLU11                                         
         Row                                     119                                                  
         Module type                             (FUNCTION)                                           
         Module Name                             AIA_TOOL_GET_STATUS                      
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    89 *                TYPE       = SY-MSGTY                              
        90 *                CL         = SY-MSGID                              
        91 *                NUMBER     = SY-MSGNO                              
        92 *                PAR1       = SY-MSGV1                              
        93 *                PAR2       = SY-MSGV2                              
        94 *                PAR3       = SY-MSGV3                              
        95 *                PAR4       = SY-MSGV4                              
        96 *           IMPORTING                                               
        97 *                RETURN     = ls_return.                            
        98 *   endif.                                                          
        99 *   if not ls_return is initial.                                    
       100 *      append ls_return to return.                                  
       101 *      raise error_in_status.                                       
       102 *   endif.                                                          
       103 *                                                                   
       104 *  Füllen der Ausgabetabellen                                       
       105    perform fill_output_tables tables lt_status                      
       106                                      lt_jsto                        
       107                                      et_appreq_status               
       108                                      et_appreqvarnt_status          
       109                                      et_appreq_user_status          
       110                                      et_appreqvarnt_user_status     
       111                                      lt_objnr                       
       112                                      lt_objnr_varnt                 
       113                                      lt_return                      
       114                               using  i_language                     
       115                                      i_with_text.                   
       116                                                                     
       117    if not lt_return[] is initial.                                   
       118       append lines of lt_return to return.                          
    >>>>>       raise error_in_status.                                        
       120    endif.                                                           
       121                                                                     
       122                                                                     
       123 ENDFUNCTION.

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

Maybe you are looking for