Error message while doing delivery
I am getting an following message while doing delivery
Material 20000019 doesnot exist in storage location DLPT 2120
Storage location was deleted since material was not maintained correctly
No Schdule line is due for delibery upto the selected date
Please guide me with the solution.
Dear Sanjay,
First of all, I would like to suggest to check the "Organizational Level" data, with which Material was created in T. Code: MM01.
Check the "Plant", along with "Sales Org" and "Dist. Chnl" in T. Code: MM02
Also, check the "Strorage Location" in T. Code: MM02
Select the Views: Sales: General Plant data/storage location and then go to organizational elements and enter the plant and storage location, save it.
Also, on to the same screen up there, in Menu-Bar:
Enviornment --> Sock Overview
It will lead you to Screen: MMBE
Check Stock for the Material.
Best Regards,
Amit
Note: I am a bit confuse with your statement:
Storage location was deleted since material was not maintained correctly
Do you mean that, You have removed "Strorage Location - DLPT 2120" from the Material Master "20000019"?
Similar Messages
-
Error Message while doing Order CLSD
Hi,
I am getting error message while doing Order CLSD...
Error Msg: Invalid cost element(XXXX) for reservation item 010.
please suggest me...how to solve this issue.
regards,
Venkatesan AnandanHi Venkatesan,
I had replied and asked for one clarrification and to check same at your end.
Is your Cost Element mapping done with cost cost center used in order settlement rule.
Also check for Material Master Change document for Valuation Class change and revert back in this thread. -
Error message while doing MIGO.
Hi,
I am getting error message while doing MIGO. Can some one help me out in this issue.
Consolidated companies 0 and 5686 are different
Message no. F5 080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
Thanks in Advance,
SubhajoCheck Fi customizing in OBA7.
As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
Within WE you must not have selected the field inter-company posting .
Best you place the cursor into this field and press F1 for detailed explanation, -
HI Guys
I created Order and while doing PGI error message comes
Error message is:
Account 892000 requires an assignment to a CO object
Message no. KI235
Diagnosis
You have not defined a CO account assignment for an account that is relevant to cost accounting.
System Response
Account 892000 is defined as a cost element.
This means that you must always specify a CO account assignment.
Procedure
Enter one of the following CO account assignments
Order
Cost center / cost center/ activity type
Sales order item (for a project or cost relevant)
Project / WBS element
Cost object (Process manufacturing)
Network/ Network activities
Business process
Profitability segment
Real estate object
The posting row affected is 000, account 892000.
Help me in this issue ...as early as possibleHello,
sales order items are not in all cases available as account assignment
object, this is only the case if it is an order with make-to-order
production (VBAP-KZVBR='E').
If the sales order item itself is a co-object (VBAP-KZVBR='E'), the
cost and revenues can be carried on the position itself and the field
VBAP-OBJNR contains the number of the co-object. Please check this for
your case.
Even if the VBAP-KZVBR is set to 'E', but if the field VBAP-OBJNR is
blank, the order cannot be the accounting object in KB21N - you should
rather use the receiving order for the activity allocation.
You can check this in KB21N via the F4-help: if the sales order item
is not displayed here, it's is not considered as valid account assigment
object.
I hope this information will help to clarify the issue.
Regards
Claudia -
USER IS GETTING ERROR MESSAGE WHILE DOING PM ORDER COLLECTIVE CONFIRMATION
Dear,
i have query from my client that user is getting error message " no status object is available for cre o/o/o while doing pm order confirmation. My client is using sap MRS . I Recommend the client to run program ZKBEDREP in se38 and still they are facing the same error.Can any body help me in solving this.Hi,
Please see if this thread helps
System status not avilable for one of the component - Conf. can't be done
Regards, -
Error message while doing data migration
Hi all
When im doing data migration for material master through Z transaction ,it is updating global DIR documents for material while doing this ,im getting the error and the transaction is stopped intermediately the error message is CHANGE MASTER STATUS DOES NOT ALLOW CHANGES no error message number.
Kindly sujjest where is that error is coming,it would be very helpfulIt seems you are using engineering change management and your change number's status is not proper (CC01, CC02, CC03; table AENR).
Configuration of the status is in T419S (use SM30 + T419S) - but I guess the problem is about your change number not about config...
How your Z-program is working, we don't know; contact the responsible functional/technical consultants.
Edited by: Csaba Szommer on Aug 19, 2011 8:41 AM -
Dear Experts,
We are facing some "entern error" while doing MIGO of any PO. Also their is no message type and no. It's just say entern error.
Please guide us in this topic.
What I feel is someone has created this error message manually. So please guide us where do can we change this message into no message type.
Thanks and Regards
Raghav PuranikHi Raghav,
Please check it there is any user exist activated in your MIGO transaction. If you were coded any exit it will populate such a message.
Also, Let me know your message details,
Whether it is standard message or customized by business?
Please double click it on your error message and check it message application area..
Go to Transaction code SMOD - and deactivate your exit data if used anything.
Thanks,
Thiru -
Error message while doing the Vendor Clearing
Dear Team,
I am encountering an issue while doing the Vendor clearing.I am nullifying the Vendor down payment against to RE document through residual posting system is showing the message like the below.
No additional posting to asset
Message no. AA 444
Diagnosis
A downpayment was already posted to the asset 80567 0 in the currently displayed document. Additional posting to the same asset in this document is not possible for technical reasons.
Procedure
Combine the two downpayments into one.
Please kindly advice.The concern Down payment is showing under open item in FBL1N.Kindly advice how to proceed further.
Thanks for the consideration.
Regards,
Suma.Hi Suma,
First clear Down payment with using of F-54 & next you can clear normal OI.
Rgds
SumaMani -
Error Message while doing F-51 (Post with Clearing)
Hi All,
We are getting an error message as "Consolidated companies " " & 009062 are diff" while executing F-51 (Post with Clearing).
While executing F-51 we are using the document type as KG.
Can you please let us know the possible reasons for such error message and how to overcome it.
Thanks in Advance..
Regards
MayankHi Suma,
First clear Down payment with using of F-54 & next you can clear normal OI.
Rgds
SumaMani -
WRT350N error message while doing Vista back-up
I have a hard drive attached to the USB port on this router. While attempting a backup from Vista, I get this error message: "cannot create a file when that file already exists."
I have a feeling that this is something not eaisly fixed. User has admin rights on both the Vista box and router and the user name and password for that user are the same on both.
Any help would be appreciated.
DanaIt might be something do with the User Permissiong, which you have created on your Router. Make sure you have given appropriate rights to the users which you have created on your Router.
Login to the Router setup page, Click on the Storage Tab, Below the storage tab you will find a sub tab "Administration" you will be able to see the users which you have created on your Router and their permissiong.
Again below the Storage tab you will see the sub tab "Disk" click on it and under the "Shared Folders" you will see the folders which you have created on your Disk, Click on Edit and under Access check the User and click on (>>) to give a user full rights and click on Save Settings.
Now on your computer, You need to Re-Map the network drive on your computer and now check if you are able to transfer the files on your Drive. -
Throw a custom error message while doing CATS timesheet approval
Hi,
We are going to implement CATS Timesheet approval using ESS / MSS portal.
Requirement is NOT to allow an approver to approve / reject a timesheet workitem in MSS duing payroll block period ( e.g last week of a month). we need to throw an error message saying 'No approval of timesheet is allowed during payroll block period'.
Will SAP enhancement CATS0006 (EXIT_SAPLCATS_006) be useful for this?
Any other customer exit / Badi will help.
Regards,
BijayHi,
yes you can use the mentioned CATS enhancement to throw the error message.
Check the link :-
http://help.sap.com/erp2005_ehp_05/helpdata/EN/bd/53fa2fcc43594dbf9f406c18989a47/frameset.htm
Thanks & Regards, Swapnil Mishra -
PROJECT SYSTEM :No error message while doing TECO(TECHNICALLY COMPLETED)
When we do technically completed for an activity in PROJECT SYSTEM ,system should give an error message if there are any production order for which materials are yet to be received. Can any one tell me how to do it.
Hi,
I don't think standard SAP supports what you want to achieve.
Regards,
Paul -
Error message while doing returns in FP09
HI Experts,
I am getting an error message as No Free number range for document type AB. I checked the document number ranges and its not exhausted.
Could you please help me where I might have done wrong in configuration.Hi Moin,
If you are sure that the number range has not been exhausted, then can you please check whether the number ranges for mass processing has been maintained or not in the following SPRO config-
IMG-->Financial Accounting-->Contract Accounts Receivable and Payable-->Basic Functions-->Postings and Documents-->Document-->Maintain Document Assignments--->Document Types-->Maintain Document Types and Assign Number Ranges
However, I still feel you check the number ranges for returns once before proceeding with the above.
Hope it helps...
Thanks,
Amlan -
Error Message while doing Initialization of opening Stock in TS
Hello Gurus
The following Message coming while performing Initialization of opening Stock in Transfer Structure of 2LIS_03_BX using T-Code: MCNB.
What may be the problem.
Pl provide me the solution.
Thank in advance
regards
vijayHi Vijay,
If you want to init your stock from R/3, take a look to this doc...It's a must !
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0ea8a990-0201-0010-2796-fa9ae8691203
http://help.sap.com/saphelp_nw04/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/frameset.htm
Hope it helps!
Regards,
San! -
Error message while creating an inbound delivery to generate an idoc
hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leoInbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.
Maybe you are looking for
-
Not working multitopology ISIS with IOS and IOS-XR
Hi everyone, I've gon a problem setting up IPv6 routing with ISIS in the test network. There are four routers connected as shown on the image. I've got problems setting up IPv6 routing in this topology. I tried single topology and multitopology ISIS
-
ERROR in Invoice posting from XI to SRM in MM-SUS plan driven procurement
Hi We are implementing MM-SUS plan driven procurement scenario. MM version is 4.7. we are using Z-Program to trigger Invoice i-doc from MM to XI. its reaching XI but from XI to SRM there is some error. the error is DYNAMIC_CALL_FAILURE Function
-
I clicked on an app in the App Store. It's hung on the screen. Can't get the background App Store screen to respond.
-
2 iframe change with 1 single click in flash
Hi all, I would like to have 2 iframe change with 1 single click in flash, I tried to find the right code but didn't get right one. Here I attached the code sample which doesn't work at all but you will the idea of what I would like to do. I heard th
-
Help with Install of Web Preimum Suite
I have a copy of Creative Suite 4 Web Premium that was on a computer that went belly up. Now want to reinstall same on another older computer that has Windows Vista Operating System. When I try to do so I get an error message that says the installati