Error message while downloading new version of iTunes

I've tried downloading an updated version of iTunes several times, but I continue to get this error message:
An error occured during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x800736B3.
Any suggestions on what to do?

i'm assuming the Error code HRESULT: 0x800763b3 means something and is the solution but where can i find the answer or am i going about this all wrong?
Yeah, this 0x800763b3 is a slightly unusual one. Normally with these, the iTunes install error code matches the error codes that people get on their Windows Update failures. But for the last two 0x800763b3s I've been involved in on an iTunes install (Liv and someone else), the 0x800763b3 on the iTunes install has been associated with an 0x8007000b on the Windows Update failures. (Liv's 643s were pretty much "generic" error message codes for Windows Update failures, which could mean anything. So that's why I/we went after the 0x8007000b, which has some Microsoft documentation on fixes.)
Doublechecking on other symptoms of your situation ... is your Windows Update not opening at all when you try to launch it?
If so, when you click "Turn Windows features on or off" in the "Programs and Features Control Panel" item, is the Windows Features dialog box empty? (No features are shown?)
(If we can't get the codes from the windows update failures, we might be able to make some progress if we can identify other symptoms that you're getting. I know some documentation for some of these codes that mentions the Windows Features thing as a possible additional symptom.)

Similar Messages

  • ERROR MESSAGES WHILE SYNCING IPHONE 3GS WITH ITUNES 11.0.1

    ERROR MESSAGES WHILE SYNCING IPHONE 3GS WITH ITUNES 11.0.1
    I just upgraded to iTunes 11.0.1 and although my music, podcast and apps sync with my iPhone 3GS (Version 4.1), iCal and Address Book doesn't! I get the following error messages:
    After clicking OK, another dialog box appears that states:
    Also, iSync has this to say:
    Until the upgrade, I had no problems syncing my iPhone 3GS with iTunes!
    How can I correct this new issue?
    Thank you very much in advance,
    David Sampson.

    Mmmmmm how strange.... have just closed and reopened and problem seems to have cleared.....

  • Error Message while downloading apps

    i am getting error messages while downloading apps on my iPhone and iPAD.. using current 4S,5S and iPAD-4 with iOS7

    Rehan45786 wrote:
    After changing my password so many times, I m getting error message while downloading apps that my id has been disables.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Want an Error message if the New Version is not ticked Completed in a PO

    Hi All,
    I want to display an error message if the New Version created while making any changes in a PO is not ticked Completed in the Header--> Versions. Please tell me in detail how can this be done?

    Hi,
    To do this goto IMG->MM->Purchasing->Version Management->Set up Version Management for External Purchasing Documents
    Here Tick on Version Active & in Field Selection in the relevant fields where you want users to enter data make them as Required Entry.  This will post an error message when ever it is not complete.
    regards,
    JP

  • Error message when downloading latest version

    Any idea why I am getting error messages when updating the version of iTunes?

    :-(  Same error message.  "Errors occured white installing the updates.  If the problem persists, choose Tools> Download Only and try installing manually."
    That's odd. That's normally a message you get from Apple Software Update, not one that you get when you installer using an iTunes64Setup.exe downloaded from the Apple website.
    Can you walk us through what happens when you download and run the installer from this link?
    http://www.apple.com/itunes/download/

  • Help...downloaded new version of itunes...and now I cannot connect

    I just downloaded new version of itunes and now I cannot connect to the itunes store...I get a message that says..."Itunes cannot connect to itunes store. the network connection timed out."
    ran diagnostics here are the results... if anyone can help...
    Microsoft Windows Vista Home Premium Edition (Build 6000)
    Hewlett-Packard Presario F700 (GR967UA#ABA)
    iTunes 8.2.0.23
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.0.31
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number D3C70EE5E29DDAC2
    Current user is not an administrator.
    The current local date and time is 2009-06-09 23:19:03.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA, NVIDIA GeForce Go 6100
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {C07101F5-89CB-4921-9239-F59263AF4FAA}
    Description: Broadcom 802.11b/g WLAN
    IP Address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Tue Jun 09 22:30:17 2009
    Lease Expires: Wed Jun 10 22:30:17 2009
    DNS Servers: 192.168.1.1
    192.168.1.1
    Adapter Name: {33E3719A-76B1-48B1-9F31-BD3CBF2DBDDA}
    Description: NVIDIA nForce Networking Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server unsuccessful.
    The network connection timed out.
    Last successful store access was 2009-06-08 09:41:24.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.1.0.1),
    E: TSSTcorp CD/DVDW TS-L632M, Rev 0A17
    Audio CD in drive.
    Found 1 songs on CD, playing time 04:24 on Audio CD.
    Track 1, start time 00:02:00
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 20 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.2.0.23 is currently running.
    iTunesHelper 8.2.0.23 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod nano (Second Generation) running firmware version 1.1.1
    Serial Number: 7J651R7ZVQ5
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.

    Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • Checking for updates and downloading new versions of iTunes

    When I open iTunes and check for udpates, I get a message saying; "A new version of iTunes is available. Would you like to download it now?" When I click Yes, nothing happens. To download the new version, I have to go to the Apple website and download it from there. Anyone have this problem and know how to fix it?

    After downloading the new update on Saturday 11-27-10 my iphone now freezes up, I contacted the help line and they informed me for a "small fee" of $30.00 they would tell me how to fix it. WHAT?? The store recommends the updates and after loading the updates, my phone now wants to freeze up and stay frozen for 30 minutes and it is constantly asking me for my password and you want to charge me for a bug in your software?? I am soooo disappointed with I-tunes and after encouraging friends and family to buy this product I am now discouraging them!!!!

  • I got an error message while burning a cd in itunes - "The attempt to burn a disc failed.  The burn failed because of a medium write error.  What is that and how can i fix it?t

    I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean and how do I fix it?

    The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

  • Downloaded new version of itunes and now it will not open on my Macbook

    downloaded new version of itunes and now it will not open on my Macbook

    downloaded new version of itunes and now it will not open on my Macbook

  • Downloaded new version of itunes lost my library now itunes won't save my library have to install my library everytime i turn computer off itunes store will not open either have tried a few ways to solve problem from community members nothing works

    downloaded new version of itunes lost my library now itunes won't save my library have to install it everytime i turn my computer off  itunes store won't open either with almost 16,000 songs this is getting unbearable if someone wants to download new version it's a nightmare

    I had the same problem on my iphone 5s, and this fixed it. http://support.apple.com/kb/TS5335

  • Downloaded new version of itunes, did a sync on my ipod and now music from my external drive is missing?  Help

    Downloaded new version of itunes, and then subsequently performed a sync on my ipod nano as I had purchased a new song from itunes store.  I now only have 25 songs on my ipod as it removed all of my other music.  My music is stored on an external drive.  I downloaded the music there from cd's that I own.  Can anyone help me fix this.  I am going on holidays soon and want to have my ipod loaded with music for the trip.  Thanks

    hi mike,
    First of all, your music is not gone. Its there, I promise. Second of all, you need to always make sure you backup your music elsewhere because funky things happen and computers do take nosedives.
    Ok, go into File on the iTunes Task bar and click on add folder to library. Your music files should be under my documents>my music. Let me know how it goes...
    Rachyl

  • HT202159 Error message while downloading. :Compressor Failed to Download. An Error has occurred. Use the Purchases page to try again." After retrying, I receive same message.

    Error message while downloading. :Compressor Failed to Download. An Error has occurred. Use the Purchases page to try again." After retrying, I receive the same message. I have uninstalled compressor and tried again. I get same results.

    Anti-viral siftware and firewalls can interfer with the MAS.

  • Error occur when download new version of Air application

    Hi All,
    Error occur when download new version of Air application.
    the error is given below
    "There was an error downloading the update. Error# 16824"
    Please help me
    Regards,
    Abhilash S

    If on windows, take a look at the following file to see what's going on:
    c:\Document and Settings\User Name\Local Settings\Application Data\Adobe\logs\Install.log
    Common issues:
    The version number specified in the application.xml file of the download is not the same as the value specified in the update.xml file.
    The application ID of the new file is not the same as that in the old file.
    At any rate, the probable in most probably due to an invalid value in the application descriptor file.

  • Im trying to download newer version of itunes how do i do it

    it says download newer version of itunes 11.1 or better i cant how do you do it

    See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    tt2

  • HT1386 I downloaded new version of itunes and now when I connect my ipad to sync there is not sync function and there is nothing on the left side of the screen like before.

    I downloaded new version of Itunes to my ipad2 and now I can't find sync button.  There is nothing down the left side to pick device, etc.  The screen is completely blank.  Help

    if your using windows, try this.

Maybe you are looking for

  • How to get client IP in custom UCM Service

    how to get client IP in custom UCM Service ?

  • Photos constantly re-rendering during viewing.

    Hi all, Since upgrading to Aperture 3, I've noticed that clicking through the photos in my project causes the "loading" indicator to come up for every photo. This used to happen in the Aperture 2, but once the photo loaded once, it was as if the syst

  • Account analysis report

    Hi, Inventory Control account shows some beginning and ending balance. The sources from Payables and projects, no pending transactions in any module.All date pushed to GL.Nothing struck up in Interface tables also.How to tackle dis issue?? Pls give u

  • Web Application Designer - Tab pages

    Hi all, we using BI 7.0 Support Package 14 SAP Gui 6.40. Any one have step by step doc regarding WAD ( Web Item: Tab pages with Hyperlinks to another web template) with screen shots? Thanks in advance. Regards, Wolfgang

  • Final Cut Express HD/Sound track

    Two questions: First, Does Shake work with Final Cut Express HD? Secondly, I am missing weapson and explosions on my Soundtrack, I tried reinstalling the CD-rom, it did not replace the two missing sounds. Any ideas? Should I unstall all of Final Cut