Error message while loading data from data mart

Please can some one help on this.
While loading data from one cube to another (I am actually creating a backup of original cube) for 1 record I am getting the error message " internal error occured with time split" The long text of error message says Message no. RSAU101

Take a look at this thread:
Internal error occured with time split
Hope it helps,
Gilad

Similar Messages

Error message while loading

Dear Friends,
i am getting error message while loading data in the cube, yesterday i got the same error message while loading ODS
the error message is as follows:
Value '差旅费 - ERIC BADEN - MEETING WITH E&Y & AYKIM ' (hex. '5DEE65C58D390020002D002000450052004900430020004200') of charac.
Thank you
Mohammad Riaz

Hi
It seems that some updates were done on the source system side and whicle entering the value so character has been enetered which is not identifed by the Bw system.
The data has to be corrected in the source system, you will have to confirm it with your client that what the data should be and for the tiem being you can load it till PSA and correct the data in PSA, and push it manually.
Give the PSA details to your client, it will conatin the data in source system format, and they will know what value has to be changed.
Hope this helps
Regards
Shilpa

Error message while loading XML parser into db

I get the following error message while loading xmlparserv2.jar
ORA-29534 referenced object SYSTEM.oracle/xml/parser/v2/XMLNOde could not be resolved
ORA-29545: badly formed class: java.lang.NullPointerException
using XSU111 package

I had the same problem. I did a search of the forum looking for the error number (that's how I ran across your question). It seems that the xmlparserv2.jar (v2.0.2.8 or 2.0.2.9) which is included was compiled with java 1.2 which is incompatible with Oracle 8.1.5 (which is what I have and probably what you have). You probably need xmlparser v2.0.2.7.
Do a search on the error number, the post is from Steve back on June 8. I found the correct version of the xmlparserv2.jar in my copy of the xmlschema stuff (xmlschema_v0_9_0_0.zip). I don't know which version is in the current xmlschema
(v1.0.0.0) but it is probably the new version.
Steve will email you the correct version if you ask.
Eric
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by nrajav ():
I get the following error message while loading xmlparserv2.jar
ORA-29534 referenced object SYSTEM.oracle/xml/parser/v2/XMLNOde could not be resolved
ORA-29545: badly formed class: java.lang.NullPointerException
using XSU111 package<HR></BLOCKQUOTE>
null

Error Messages While Loading Acrobat 6 Pro

I get 2 error messages while loading Acrobat 6 Pro. They began to to appear after downloading, and then removing, trial versions of CS5.5 Suite and CS5.5 Flash. The error messages are:
1:- There was an error while loading the plugin SaveasXML.api. The file cannot be found.
2:- bootstrap.js script error during eval()".
Trying to uninstall Acrobat 6 Pro so it can be reinstalled fails.
How can I fix these problems?

Thank you Bill,
Yeah, of course you are rigt: my AA is a dinosaur... But somehow - and to be quite honest, I don't know exactly how I managed - I CAN make PDF-files now. (?!) I changed some settings in my printing menu and, well... it worked again.
Thanx anyway for your time and energy to help me. Appreciated!
Grtz from the Netherlands,
Ingrid

Error Message While Running Sequence from Planning and/or SmartView

Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.

Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb

Error message while loading iCloud on PC

I am trying to download Icloud to my PC so I can send files to my iPad. While downloading I get the following error "The instruction at 0x00000000 referenced memory at 0x000000. The memory could not be written." What do I need to do to make the memory write?
Thanks

What OS are you running? That kind of message is usually generated in XP (service pack 2) due to DEP issues. (DEP = Data Execution Prevention). You may need to disable this feature.
Try:
Start > Control Panel > System > Advance > Performance Settings > Data Execution Prevention
Watch out though, I hear XP has various issues on iCloud. You may want to upgrade to a more recent OS.
Windows 7 is much better (don't bother with Vista).
In general, try Googling these kinds of error messages. You can normally get to the bottom of things quicker by searching on the Web, rather than faffing around with Mac's tech assistance, especially when it comes to PC-related problems. In my experience the kids at Apple's Express Lane know very little about anything, and Apple forum users with truly helpful info are few and far between.
Hope you fix your problem without too much trouble!

Error message while changing the delimit date of a job in ppome

Hi experts,
I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
Pls help...

Dear Priaynka,
Thanx for ur reply, I am again furnishing below the details:-
I have to change the Valuation Class of the material :-
7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
1 PO for which Goods Receipt & Invoice Receipt have not been made.
All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
Should I change the valuation class by deleting the line item of all the PO's 7 POs + 1 PO.
Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
Please advise if I am wrong in the procedure.
Regards,
Alok

Error message while deleting files from the tracker

I deleted four files from Acrobat.com before removing them from the desktop tracker and now I don't seem to be able to remove them or stop collecting data on the files in the tracker. Am I missing something or is there not a way to get rid of them?
Rufus Chaney

Please try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested.

How to fix Netflix Movie Viewer Error code while loading movie from Netflix.

The Problem started with the update to Mozilla 3.6. It does not allow downloading or buffering the movie to the desktop for viewing with Netflix Movie Viewer Program. It works fine with Internet Explorer 8.0. Netflix is instructing customers to use Internet Explorer in place of Mozilla Firefox 3.6 to eliminate the problem.

iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes

Error message while syncing contacts with windows address book

getting error message while syncing contacts from windows address book cradsstring something

Hello,
The complete and exact error message is always more helpful than some small snippet something. Please provide that, and maybe we can make some better guesses for you.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

Error Message While Saving Data : ORA-00372

Hi,
I am Getting this Error Message while Saving the data from frontend.
ORA-00372: file 5 cannot be modified at this time
ORA-01110: data file 5: '/db/d401/CHG_arsystem_01.dbf'
Thanks.

This might be the case when DBA is trying to make tablespce read only and some transaction is waiting for commit read only command is in hang state.
Check with your DBA to know the datafile status.
Dilipkumar Patel.

Error message while loading data from data mart

Similar Messages

Maybe you are looking for