Error message while re-placing the MIC

Hi all,
I want to replace a MIC (Complete copy model type) for the master recipe. When i tried to replace the MIC in QS27 i got the following error message.
Message no. QP879
Diagnosis
There may be several reasons that lock indicators appear in the first column. For example:
The master inspection characteristic is unlocked and only used as a copy model.
The characteristic is not completely maintained.
A user exit is active (see Implementation Guide).
The replacement was happening for "Reference char" but not for complete copy model.
I have to replace the MIC's for more than 2000 materials( Master Recipe). Kindly suggest how to address this issue.
My requirement is i want to change the version number of one particular MIC in all master recipe.
Example: To replace MIC_APP version 1 with MIC_APP version 2
Awaiting for your inputs
Regards
Hari
Edited by: Harikris_83 on Feb 20, 2012 7:15 PM

Hi FF,
Thanks for your reply.
I tried through CWBQM. But the working area is not available for master recipes.
It is available only for the following.
N     Routing
S     Reference operation set
Q     Inspection plan
Also i tried to create working area for master recipe in QCC0>>>Quality Planning>>Engineering work bench>> Define Work Areas.(Txn code: OQ77)
But here the Usage area by default it is coming as Q(Inspection plans) am not able to create for Master recipes.
Kindly suggest me how to proceed on.
If i go for LSMW option i am having the following issue.
One recipe group will have this MIC in operation 70 and the other recipe group will have this MIC in operation 80. Then how can be address this issue in LSMW, will it be possible through recording method?
Provide your valuable inputs.
Thanks and Regards
Hari

Similar Messages

I keep getting an error message while connecting to the server ("Unknown error") and there is no way to reset preferences on Mac OS X.

My sync preferences keep disappearing and I keep getting the "Unknown error" error message.

Hi!
The sync infrastructure is having some issues and we are working to fix them as soon as possible.
Check this site for the latest updates: https://services.mozilla.com/status

Error message while loading

Dear Friends,
i am getting error message while loading data in the cube, yesterday i got the same error message while loading ODS
the error message is as follows:
Value '差旅费 - ERIC BADEN - MEETING WITH E&Y & AYKIM ' (hex. '5DEE65C58D390020002D002000450052004900430020004200') of charac.
Thank you
Mohammad Riaz

Hi
It seems that some updates were done on the source system side and whicle entering the value so character has been enetered which is not identifed by the Bw system.
The data has to be corrected in the source system, you will have to confirm it with your client that what the data should be and for the tiem being you can load it till PSA and correct the data in PSA, and push it manually.
Give the PSA details to your client, it will conatin the data in source system format, and they will know what value has to be changed.
Hope this helps
Regards
Shilpa

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

ORA-12705 Error Message while trying to connect to the DB

A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
ORA-12705: invalid or unknown NLS parameter value specified
Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
Any clues ? I am clueless at this point.

This can occur with any NLS_ environment variable of registry value.
Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
The order of precedence is environment variable, registry, Oracle provided default.
To find out what is going on set every NLS related environment variable to the empty string.
In sqlplus
select * from v$nls_valid_values
will show you what can be set,
This error will also occur when you installed the software with English as the only language.
SQL developer doesn't use tnsnames.ora
The new tnsname entry has nothing to do with it.
You have an incorrect environment variable or registry value somewhere
(in HKLM\software\oracle)
Sybrand Bakker
Senior Oracle DBA

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

I am getting error message while attempting to upgrade the software to iOS 6.1.3

Hi,
Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

The Current iOS for the iPhone 4s is iOS 7
How to update your iPhone, iPad, or iPod touch

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Error message while uploading the flat file

Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshay

hi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125).

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125). I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM. Any ideas why?

That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
In the Share to Media Browser dialog box choose the Large Size.
When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
Create a new project and click on the Media button near the lower right hand side of the Project Window.
Then click the Movies button in the Browser window just above that.
Under the iMovie star icon you should see the name of the project you shared out from iMovie.
Drag that into the project and burn the DVD.
If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
Bengt's tips for great DVDs

Error message while re-placing the MIC

Similar Messages

Maybe you are looking for