Error message while syncing

When I go to sync my iPod it only syncs some of the music i have downloaded and a little bit into it, it gives me an error message that says: Attempting to copy disc "Katrina's I" failed. An unknown error occurred [-69] Please help I am not able to get the shows I downloded onto my iPod. Thanks

Hello kheyen,
And welcome to Apple Discussions!
Have you had a chance to look at this Apple support document related to this issue? If not, it is a good place to start.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
Hope it helps.
B-rock

Similar Messages

Error message while syncing contacts with windows address book

getting error message while syncing contacts from windows address book cradsstring something

Hello,
The complete and exact error message is always more helpful than some small snippet something. Please provide that, and maybe we can make some better guesses for you.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ERROR MESSAGES WHILE SYNCING IPHONE 3GS WITH ITUNES 11.0.1

ERROR MESSAGES WHILE SYNCING IPHONE 3GS WITH ITUNES 11.0.1
I just upgraded to iTunes 11.0.1 and although my music, podcast and apps sync with my iPhone 3GS (Version 4.1), iCal and Address Book doesn't! I get the following error messages:
After clicking OK, another dialog box appears that states:
Also, iSync has this to say:
Until the upgrade, I had no problems syncing my iPhone 3GS with iTunes!
How can I correct this new issue?
Thank you very much in advance,
David Sampson.

Mmmmmm how strange.... have just closed and reopened and problem seems to have cleared.....

ITunes error messages while syncing after 0SX 10.6.6 update

After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes when trying to sync both my iPhone 4 and my 1st generation Apple TV:
iPhone error message:
"The iPhone cannot be synced. The disk could not be read from or written to."
Apple TV error message:
"iTunes cannot sync photos to the Apple TV because of a problem on your computer. The disk could not be read from or written to."
I'm not sure if this matters - but in the iPhone error message - it does not state if the "disk" is the iPhone or the computer - but in the Apple TV error message it does make this distinction, saying that the problem is on my computer and specifically mentions photos.
Now, once I dismiss either of the error messages, the sync progresses normally and completes successfully. Also, I have checked my computer (MacPro) and all diagnostics (including the internal hard drives) pass with flying colors. And the computer is working fine otherwise - so I have no reason to believe that there is a hardware problem with the computer. And I would find it very strange that I would have a hardware problem with both my iPhone and Apple TV appearing at the exact same time. And finally, both the iPhone and Apple TV are performing normally when in use.
Since this problem did not start until after running the 10.6.6 update - logic tells me that is where the problem probably lies.... the question is how to resolve it - anyone have any ideas?

Both those symptoms are consistent with a damaged photo cache. If you remove your existing photo cache as per the instructions in the following document, does that get you past the error?
[iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314]

Error Message while syncing ipod

I have a 60GB photo ipod. I was having some issues and I've just restored it. Now while trying to sync with itunes i keep getting an error message "the disk could not be read from or written to"? Any ideas?

Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

Error message when syncing mail accounts...

I recently started getting this error message while syncing on Windows XP running Outlook 2007.....
iTunes could not sync mail accounts to the iPhone "Nick DeGiovine's iPhone" because an error occurred remapping record identifiers.
Any assistance in resolving this issue would be greatly appreciated...!

Mackinator,
All of the email addresses are with servers that have presets on the iPhone, and it appears the interaction between what you are syncing, and those presets is where you are having the error.
You may want to consider using some of those presets. For example bellsouth.net's email is now hosted by Yahoo. You can enter the settings for it in a few steps. When adding the account to the iPhone, choose the "Yahoo" presets. Put in the username as your entire @bellsouth.net email address. There will be @yahoo.com visible, but won't affect the functionality of the account, and people you send to won't see the @yahoo.com after your address. The Bellsouth account will now work, and should also get push notifications for your Bellsouth email via Yahoo.
For your GMail account, choosing GMail will configure the outgoing server to work on most networks. The exception is networks that block the majority of ports, such as some work environments.
This article contains more information on mail settings including the information about @bellsouth.net and Yahoo.
http://docs.info.apple.com/article.html?artnum=306074
Hope this helps,
Nathan C.

HELP!! I'm getting an error message while trying to sync my iPhone 5 to iTunes. Appreciate support.

I'm getting an error message while trying to sync my iPhone 5 to iTunes. Appreciate support.

Click here and follow the instructions.
(60852)

Error message withg sync, tried everything, nothing helped. Please help me.

Gets error message "Attempting to copy to the disk "Ipod" failed. The disk could not be read from or written to". It will put on about 15-30 songs before displaying this message, and can fully sync but it takes forever because i have to press "ok" than "sync" every 15-30 songs. already tried to send it back for a warranty replacement but they said there is nothing wrong. i tried everything, restored, zeroed out ipod disk, reloaded itunes, and all over again about 10 times

Ran into the same error message while attempting to synch an iTunes purchased movie to my son's 5th Gen Video iPod from my G5 Tower (OSX 10.4.11). Here's what worked:
Restored his iPod to factory settings. Noticed that this included having the iPod enabled for disk use (this box was not checked previously -- when we were getting the error message). Reselected which playlists and videos to synch, applied the synch settings, then waited (with crossed fingers and a few prayers to boot!). It worked. No error messages.
Note: the iPod synch cable is plugged directly into one of the USB2 ports on the back of the G5 tower -- not into one on the 3rd party PCI expansion cards I installed to add more USB2 & Firewire ports (not sure if this is relevant, but it seems so based on your discussion thread here). Hope this helps.

ITunes displays -48 error message when syncing iPod Nano on Windows XP

My girlfriend's mom's iPod Nano ran out of charge while jogging so she decided to charge it on her daughter's iHome. The next day she went to use her iPod but it was totally empty of all music and files. When she tried to sync it to iTunes, she received an eror message stating, "An unknown error has occurred (-48)" from iTunes and a Windows message stating that some iPod folder/file was corrupted.
If anyone receives such a message, I was able to correct it by:
-Plugging in your iPod to your PC
-Ignore the error messages
-Go to My Computer
-Find your iPod's drive letter (ie. G:)
-Right-click on it and select Properties
-Go to Tools Tab >Error-checking and select Check Now
You should be able to sync your iPod as before. I do not claim to be an expert so be warned that it may not work for you. Good luck!

Hey ermides,
Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
http://support.apple.com/en-us/ts1539
Thanks,
Matt M.

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

Error Message while making PO

Hi,
I got a error message while creating PO.
"No short text maintained in language DE(Please re-maintain material)"
How to go with this?
Regards

Hi,
check MMR language........
Or
use this path
SPRO-MM-Purachsing- Meassages-Define Texts for Purchase Order
Here maintaion text for Header and item for document item (EKKO,EKPO for ur doc type)and save.
Regards,
Biju K
Edited by: Bijay Kumar Barik on May 14, 2008 12:22 PM

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Error Message while downloading apps

i am getting error messages while downloading apps on my iPhone and iPAD.. using current 4S,5S and iPAD-4 with iOS7

Rehan45786 wrote:
After changing my password so many times, I m getting error message while downloading apps that my id has been disables.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Error message while syncing

Similar Messages

Maybe you are looking for