Error message while trying to encode a video with afterFX composition involved

OK, so heres the thing. I wanna encode this video I made, in CS3, but every time I try, it says,
"the source and output color space are not compatible or a conversion does not exist"
This only happened after I tried adding an After Effects composition to the mix.
The After Effects comp is nothing more than a high res JPG spinning, which I made in illustrator and exported as a JPG (obviously).
I searched around the internet for this error and the help menu but cannot find anything that even comes close. The videos in the Premiere project are YUV 422 10-bit CCIR 601 non-compressed.
Anyone have any ideas?

it doesnt solve the issue
Maybe not. But it will get the job done, which is the higher goal here, no?

Similar Messages

Getting an error message while trying to use a ZTABLE with TABLES statement

Hi All,
I wanted to use a ZTable with the TABLES statement, but it is throwing an error saying " Ztable must be a flat structure. you cannot use internal tables, strings, references or structures as components."
What might be the reason for this error??
Thanks in advance.

This Ztable, is this a transparent table (structure) or is it a table type?
In case of table type, you should use USING or CHANGING parameter.
Might be better to paste part of your code here, and do not forget to tell how this Ztable is defined (Data dictionary or even local type).

Error message while trying to play rented moves on Apple TV

I keep getting an error message while trying to play my rented movies. I have rebooted the Apple TV. Lowered the resolution. Restated my modem . Rest my Apple TV. Soft rebooted it and it plays all Netflix and previews in HD no problem just not the movies I have rented !! Extremely frustrated regretting my purchase extremely!! About ready to boycott!

I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

Why am I receiving an error message while trying to change my phone number?

So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later." I was hoping to circumvent the 15$ fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days. Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating

Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee. However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available. I'm sure this will all work out for you if given some time. Sorry.
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE.

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly

Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

Getting an error message while trying to update Adobe AIR.

I keep getting this error message while trying to update Adobe AIR:
Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
*Please help me resolve this issue.

Sundeep, I'm getting the same message.
I'm on OS 10.5.8
I've downloaded the Adobe AIR Installer, but the installer always indicates that it will update Adobe AIR
Installed: 1.5.2.8870
Update: 1.5.3.9130
A spotlight search for these two log files produces nothing.
I also followed your instructions here:
Double-click the Terminal application located at /Applications/Utilities/Terminal.
Type cd /Users/userName.
Type echo > .airinstall.log and/or echo > .airappinstall.log "
But terminal replies with "No such file or directory"

I keep getting an error message while trying to download the cd for my Epson SX515W Printer

Can any one help me with this problem? I keep getting an error message while trying to download the cd for my new Epson Stylus SX515W series printer.

Contact Epson's support and read the troubleshooting section of their manual - http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-SX515W/Driver s-Support

HELP!! I'm getting an error message while trying to sync my iPhone 5 to iTunes. Appreciate support.

I'm getting an error message while trying to sync my iPhone 5 to iTunes. Appreciate support.

Click here and follow the instructions.
(60852)

HT4623 my phone got an error message while trying to update

my phone got an error message while trying to update

I received an error message when attempting to install the latest update as well. Went through all steps, downloaded through Itunes and when asked to update my apple id by entering an e -mail, the following error message appears:
Could not sign in
There was a problem connecting to the server.
However, I was able to access google/gmail account servers prior to installing iOS 6. Now my phone is stuck at this error message and I can't use it!

ORA-12705 Error Message while trying to connect to the DB

A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
ORA-12705: invalid or unknown NLS parameter value specified
Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
Any clues ? I am clueless at this point.

This can occur with any NLS_ environment variable of registry value.
Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
The order of precedence is environment variable, registry, Oracle provided default.
To find out what is going on set every NLS related environment variable to the empty string.
In sqlplus
select * from v$nls_valid_values
will show you what can be set,
This error will also occur when you installed the software with English as the only language.
SQL developer doesn't use tnsnames.ora
The new tnsname entry has nothing to do with it.
You have an incorrect environment variable or registry value somewhere
(in HKLM\software\oracle)
Sybrand Bakker
Senior Oracle DBA

Error message while trying to run combo update

I get the following error message when trying to run the combo update.
"You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update."
I tried with both 10.5.7 and 10.5.8 and I get the same message.
Any suggestions?

1. Be sure you have downloaded the 10.5.8 Combo Installer.
2. Verify that you have 10.5.x installed by opening About this Mac from the Apple menu. The installed version should be displayed.
3. Do the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Getting error message while trying to open any document in the library

Hello,
I am getting the following error message when trying to open any document in the Library. The Workspace name is Contract Lifecycle Management for Public Sector
Error
System error. Please re-try your action. If you continue to get this error, please contact the Administrator.
Oracle Access Manager Version: 11.1.1.3.0
Copyright © 1996,2010, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Ram,
The error was coming fro OAM which is the authentication system for BeehiveOnline. I suspect but cannot confirm that you have a cookie in the browser that has a different identity from the one you need - maybe you have logged into another OAM OIDin another system.
If you clear cache in your browser or use a different one I think the problem will go away. If you are unsure how to clear cookies you could go to one of the websites like otn.oracle.com and log out of your account - that will flush out the authentication cookies.
Phil

Error message while trying use Adobe Export PDF (to word)

I have an "active"account for Adobe Export PDF/Word. Every time I try to convert a PDF to a word document the following error pops up everytime: "An error occurred while trying to access this service". Is there a solution?

I'm sorry you're getting this error. Could you try the following?
1) Log out of your account and log back in. Do you get the same error as before?
2) Log in to the ExportPDF service on the web ( https://cloud.acrobat.com/exportpdf ). Do you still get the same error if you directly upload the PDF at the website and try to export it there?

Error message while trying video and audio chat.

I have tiger 10.4.11 and tried to video chat with leopard, without success. Writing is ok. However, my friend on leopard was capable to chat with another friend, so the issue is with me. Now I remember that I tried to set up a video chat with amsn, without success too.
The error log, only the interesting part ( ) is at the bottom. I tried to
1) desactivate the firewall
2) activate and set up the following ichat ports:5060, 5190, 5297, 5298, 5678, 16384-16403
3) I tried the following settings with quicktime: automatic or T1/intranet/LAN 1,5Mbps
I have a wireless modem, with an encrypted connexion. I have a PC, connected on the same modem, and with it I had no issue with the webcam or having a audio conversation with skype. Therefore, I deducted that it was not my modem, but rather imac...
Any guess?
Thanks,
Sonia
Error message got after an audio conversation test:
iChat Connection Log:
AVChat started with ID 2264065641.
soniacolombilion3: State change from AVChatNoState to AVChatStateWaiting.
0xd3d9b60: State change from AVChatNoState to AVChatStateInvited.
0xd3d9b60: State change from AVChatStateInvited to AVChatStateConnecting.
soniacolombilion3: State change from AVChatStateWaiting to AVChatStateConnecting.
soniacolombilion3: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0xd3d9b60: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8

So how are the port allowed in the modem ?
Are they set for iChat ?
How are they opened for the AIM app ?
7:52 PM Saturday; January 26, 2008

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

Error message while trying to encode a video with afterFX composition involved

Similar Messages

Maybe you are looking for