Error message while upgrading to System Center 2012 R2 Orchestrator

I recently tried upgrading System Center 2012 Service Pack 1 Orchestrator to System Center 2012 R2 Orchestrator on a Windows Server 2012 instance, running in VMware Workstation. According to the Microsoft TechNet documentation, you basically remove all of
the Service Pack 1 Orchestrator components, and then install the new R2 Orchestrator components.
Management Service
Runbook Service
Orchestrator console and web service
So, that's what I did. When it got to the point of running the Orchestration Console and Web Service installation, it failed.
The relevant portion of WebComponents.msi log file indicates the following:
MSI (s) (10:A8) [10:52:15:669]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIC647.tmp, Entrypoint: WriteIIS7ConfigChanges
WriteIIS7ConfigChanges: Error 0x80090016: Failed to Commit IIS Config Changes
WriteIIS7ConfigChanges: Error 0x80090016: WriteIIS7ConfigChanges Failed.
CustomAction WriteIIS7ConfigChanges returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (10:4C) [10:52:15:760]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (10:4C) [10:52:15:760]: User policy value 'DisableRollback' is 0
MSI (s) (10:4C) [10:52:15:760]: Machine policy value 'DisableRollback' is 0
Action ended 10:52:15: InstallFinalize. Return value 3.
Screenshot:
So far, I have tried removing IIS and reinstalling it completely from scratch. That has made zero impact on the problem thus far. I posted this same issue over at
Server Fault, but am adding it here for visibility.
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

Similar Messages

Password for the System Center 2012 R2 Orchestrator Evaluation VHD

I recently downloaded the Evaluation VHD for System Center 2012 R2 Orchestrator. After performing the initial setup, I am unable to log in with the credentials that i had provided initially for the Administrator. I faced a similar situation while working
with Evaluation VHD for System Center 2012 R2 App Controller. In that case, after some searches I found 'R2Preview!' as its default password. I have already tried other passwords - P@ssword1, P@ssword, p@ssword1, password1, blank password.
I hope someone can help me with this !

Sorry,
http://www.microsoft.com/en-us/download/details.aspx?id=39297:"For the
password type pass@word1"
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Error message: While activating source system in RSA1

When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
System response: Error when sending data to BW.
Procedure: Enter Idoc type ZSAE008.
Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
Can anybody kindly help me resolve the issue.
Message was edited by:
Muzafaruddin Mohammed

Hi,
You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P

Geting Error message while in Lenovo Solution Center window

Getting a error message when clicked on Device Manager Icon
"LSC is unable to run because a required file is missing"
Please help resolve ASAP
Shanks

Hi Shanks,
Welcome to Lenovo Community!
I’m sorry to hear that you are having the issue with Lenovo Solution Center.
I would like to request you to reinstall the Lenovo Solution Center to resolve the issue. Please uninstall the current version of Lenovo Solution Center from uninstall or change a program option from control panel and install the latest version of LSC.
Please click the below link to download the application based on the requirement of the OS version.
Lenovo Solution Center for Windows 8.1 (32-bit), 8 (32-bit), 7 (32-bit)
Lenovo Solution Center for Windows 8.1 (64-bit), 8 (64-bit), 7 (64-bit)
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Error message while upgrading transfer rules

hi
while migrating transfer rules to transformations
i am getting
automatic time convension not possible for source field kmonth.
i say continue and continue i got transformations
whjat is this message how can i solve

Hi,
Please check the settings for the mappings in the Transfer Rules. Also, have you made some settings for "kmonth' ?

How to create a Domain user in a Specific OU using System Center 2012 R2 Orchestrator and Service Manager

Dear All,
I have a simple Runbook with the following details:
Initialize Data: (First Name, Last Name, Login Name, Deparment Name) --> Create User: Name:(Domain), Common Name, Display Name, First, Last Name, SAM Account Name (From Initialize Data) --> Enable
User: Distinguished Name --> Add User to Group: Group Distinguished Name, User Distinguished Name
Active Directory Management Pack in place and the Prerequisites Configurations are added Too (Configuration User Name, Configuration Password, Configuration DC, Configuration Default OU.
The Runbook is Synched with Service Manager, Request Offering/Service Offering and published to the portal.
When I filled the 4 required values (First Name, Last Name, Login Name, Deparment Name), the Runbook will kick off and the user is created in Active Directory.
The user is placed in the Default OU which is predefined in AD Prerequisites Configurations in Orchestrator.
I need to add another Required Value to my Request Offering (SR) called User Level Enum List (Low, Medium, High).
I need to place the user in a Specific OU based on the Level entered from SSPortal, If the user is Low, then Create the user in this OU, if the user is Medium then create it in this OU, etc...
How can I do this in Orchestrator? What I want to modify in my runbook to accomplish this task?
Thank you,

I AM TRYING TO USER/MAILBOX CREATION PROCESS, FOLLOWING IS THE BUSINESS REQUIREMENT
GET THE USER FROM ERP SYSTEM (SQL)
CREATE USER IN SPECIFIC OU
ENABLE THE MAILBOX IN SPECIFIC DATABASE BASED UPON USER ROLE
CREATE A USER IN NAVISION SYSTEM WHICH IS AGAIN JUST CREATING SQL LOGIN.
PLEASE ADVISE ME THE PROCESS AND PROCEDURE ILLUSTRATION IF IT ALL POSSIBLE IN SINGLE RUNBOOK.
I AM ABLE TO CREATE USER/MAILBOX BUT STRUGGLING TO CREATE IN SPECIFIC OU/MAILBOX DB AND SQL LOGIN.
FARRUKH
[email protected]
Farrukh Anwar

System Center 2012 R2 install: SQL server Data file and log file

This might be a dumb question, but I can't find the answer anywhere.
I'm installing a new instance of System Center 2012 R2 on a new server, I'm stuck on the SQL Server data file section. Everytime I put in a path, it says that tne path does not exist. I'm I supposed to be creating some sort of SQL Server
data file and log file before this installation, I didn't get this prompt when installing System Center 2012 SP1 or hen I upgraded from System Center 2012 SP1 to System Center 2012 R2
My SQL is on a different server
Thank you in advanced

Have you reviewed the setup.log?
On a side note, why would you put the database file on the same drive as the OS? That defeats the whole purpose of having a remote SQL Server. Why use a remote SQL Server in the first place.
Jason | http://blog.configmgrftw.com

System Center 2012 R2 DPM Support Files installation has failed when running Remote SQL Prep on SQL server

I am trying to install DPM 2012 R2 and one of the pre-reqs is to run 'DPM Remote SQL Prep' before kicking off the DPM installation. My SQL server is 2012 SP1 and when I select this option, I get an error straight away telling me 'System Center 2012
R2 DPM Support Files installation has failed'.
Not sure how to troubleshoot this as doing a search did not bring up anything.

I am trying to install DPM 2012 R2 and one of the pre-reqs is to run 'DPM Remote SQL Prep' before kicking off the DPM installation. My SQL server is 2012 SP1 and when I select this option, I get an error straight away telling me 'System Center 2012
R2 DPM Support Files installation has failed'.
Not sure how to troubleshoot this as doing a search did not bring up anything.
Ignore this.
I launched the setup as Administrator and it worked!

Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR

Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:48
Event ID:      33503
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack:    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Data Warehouse" />
    <EventID Qualifiers="32768">33503</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
    <EventRecordID>13089</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>DW2012.contoso.loc</Computer>
    <Security />
</System>
<EventData>
    <Data>Transform</Data>
    <Data>22989</Data>
    <Data>TransformEntityRelatesToEntityFact</Data>
    <Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
    <Data>   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Enabling Instant Messaging Notifications in System Center 2012 Operations Manager

Hello
I need your assistance please...
I followed the steps here
http://opsmgrunleashed.wordpress.com/2012/02/24/enabling-instant-messaging-notifications-in-system-center-2012-operations-manager/ to enable IM notification.
I received error in opsmgr console "Failed to send notification" the alert state (Microsoft.Rtc.Signaling.ConnectionFailureException: Unable to establish a
connection) while on the lync server I see critical event ID: 36888 (
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.)
Appreciate your help.
Thanks
Mohammad, IT NOC Team

Hi,
Please checked the setting of the IM channel, ensure the Protocol is TLS and port is 5061.
Also try to create the following registry key for a test. If the issue persists, check the event log from SCOM side.
New Key: SHA
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\SHA
SubKey: Enabled
Value: Dword:00000000
Niki Han
TechNet Community Support

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

Getting error message while defining Profit Center

Dear Expert,
Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit center"Conversion failed when converting the nvarchar value "Profit Center Name" to data type int (CINF)".
If anybody had a solution or came across this kind of situation then please forward us your valuable information that would be really great to tackle and out come from this issue.
Thanks in Advance
Regards
Krishna

Dear Krishna,
What is your B1 version and PL? Is it upgraded from an old one?
Thanks,
Gordon

I am getting error message while attempting to upgrade the software to iOS 6.1.3

Hi,
Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

The Current iOS for the iPhone 4s is iOS 7
How to update your iPhone, iPad, or iPod touch

System error message while using maps check in

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

Error message while upgrading to System Center 2012 R2 Orchestrator

Similar Messages

Maybe you are looking for