Error message with .cfm file

I posted a topic here
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=1&catid=2&threadid=12 71757&enterthread=y
, but I think I should have posted it here.
Any help would be great. Thnks

Sounds like probably your hosting company has disabled
method="POST" for certain pages. You'd have to check with them
regarding this restriction.
Before trying to use CF on a server, make sure the CF server
software is actually installed and supported by your hosting
provider. Most providers enable some application server technology
(PHP, ASP, CF) by default, but sadly CF is rarely on that
list.

Similar Messages

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly. I have uninstalled/reinstalled evernote but it still doesn't work. Anyone know where evernote stores their files on a Mac/

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish. There is a large X with a Question mark in the middle over the entire background of the page. The error message says the file is missing. I did not delete files.

I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish. There is a large X with a Question mark in the middle over the entire background of the page. The error message says the file is missing. I did not delete files. How can I find files that seem to be missing?

This is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, Paul

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

After editing a photo, I sometimes get an error message that the "File is empty". Can revert to original and start again, but file disappears after editing.

So frustrating! I open the photo. Edit by cropping, adjusting color, etc. It's perfect. I click DONE and move on to the next. When I come back, the first photo is gone. I can see it in the album but cannot open it. When I look at the file information, it shows zero KB. If I move it to the desktop and try to open it, the error message says the file is empty. I can revert to original and there it is. Edit again, and again it disappears. What am I doing wrong? I am using iPhoto 09

You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
Regards
TD

Error message "cannot locate file"

I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?

Have you added all the songs to the library? Just by dragging and dropping?

Error message c:\program files (x86)\itunes\ituneshelper.exe r6034

can not log into itunes, get the following error message: c:\program files (x86)\itunes\itunes help.exe
R6034
I have uninstalled and reinstalled and still unable to login

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

Download error message - "Cannot Create File"

Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH Quicksilver Mac OS X (10.3.9)

Recently I developed a problem and am unable to
download anything (files, software, etc) from any
website. I begin a download, the download manager
comes up and it shows an error message "Cannot Create
File." I am using the default manager that is
incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I
downloaded a software demo. I decided to get the full
software package and trashed the demo files per the
company's instructions. I got the error message when
I tried to download the full program and now get the
message no matter what I attempt to download. Might I
have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but
still have the problem. If I use an external hard
drive with spare copy of 10.3.9 and make that my
start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH
Quicksilver Mac OS X (10.3.9)
I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

Error Message: Conversion of file content to XML failed at position 0: sun.

Hi Experts,
i strugle with a File 2 IDOC Scenario.
In the sender communication channel monitoring I get the error message:
Conversion of file content to XML failed at position 0: sun.io.MalformedInputException
Unfortunately I am not getting any further information and I do not know where the file-adapters problem is.
Tthe .fieldSeparator = # . Can this be the problem, that the file-adapter-engine can not handle # within file conversion? I also tried it with .fieldSeparator = '#' . But the error message is the same.
I am glad for any hints.
Thank you for your help in advance.
Regards,
Udo

Hi Udo,
The error is due to wrong intput.
putting # might be a reson.
You Can try (,) or a space as a field separater.
Can you test this once.
Have to defined the field separated?
Regards,
Sumit Gupta

The Error Message 'Application descriptor file cannot be parsed' shows when compiling (Ctrl + Enter) Adobe AIR for Android applications on Flash Professional CS5.5

The Error Message 'Application descriptor file cannot be parsed' shows when compiling (Ctrl + Enter) Adobe AIR for Android applications on Flash Professional CS5.5
This is happening for most of the pupils and staff at our school and they are unable to complete their work.
This also happens on a fresh copy of windows and CS5.5 without any updates and also with all latest updates.
I have tried it on 32-bit and 64-bit CS5, Windows, Air and Java with the same error every time.
There are a small minority of users where this works fine for them with no issue.
I have tried re-setting user profiles.
I have tried a local admin and domain admin account with the same issue
I have noticed however that if the file is moved to the shared area it will compile. If it is on their documents area it will not compile. The users have full control in both locations. This is fine for staff but we are unable to give full control or modify access to the shared area for the pupil's
I have been through the online support section and it directed me to phone Adobe Customer care who informed me that all support has been discontinued for CS5, CS5.5 and CS6 and they will only support creative cloud.
Any ideas what to try next? There is no other information about this error and I cannot work out what is causing it.

I have tried and able to package an apk using your XML file.Could you please make sure your XML file starting from line 1 and coloumn 0.Any space will results in the error (Application Descriptor file cannot be parsed)
-Pranali

Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.

Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks.

Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

I just purchased and installed a Canon MX 922 multi-function printer. I'm having a problem with the scanner in that the output after scanning cannot be displayed and is accompanied with an error message : Cannot write file. Code 10,242,7. This occurs when scanning documents and images. My operating system Windows XP (32). Can anyone please help me solve this problem? Thank you.

Hello. Please try the following adjustment to see if we can resolve this issue: 1. Open the IJ Scan Utility from your Desktop or the Canon Utilities listing of the Start Menu.2. Click Settings.3. On the left, choose the Auto Scan tab.4. Click the Defaults button on the lower right.5. Continue this process with each tab on the left.6. Click OK at the bottom of the Settings menu. Once this has been done, try scanning from the IJ Scan Utility to test the unit. If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.

Error message with .cfm file

Similar Messages

Maybe you are looking for