Error message with library item in template

I'm not sure if this is a PM issue or a DWCS3 issue. The only
way to find out is to ask.
I have gone through the process of creating a a library item
of a
PopMagic menu according the the video provided by P7. Works
well.
Then I added the library item to an existing DWCS3 template
and saved
it. When I attempt to create "new from template" page from
the template
menu, I get this error message
http://www.jdcdemo.com/blf/error.html
If I do the same with a template without the menu, the
error message goes away.
If I create a page with from a template where I've left an
editable
region for the menu and then insert the menu and save the
page, I also
get the error message, but the page seems to work ok.
Since I can't create a new page with the template, I opened
it and saved it as a page:
http://www.jdcdemo.com/baim/BLF8/error-message.html
What is going on here and is there a fix?
Thanks,
Joe

Look at your code. Count <body> tags. How many do you
get? Yeah - that's
wrong. You didn't follow the video....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"camelbreath" <[email protected]> wrote in
message
news:g680gh$3c$[email protected]..
> I'm not sure if this is a PM issue or a DWCS3 issue. The
only way to find
> out
> is to ask.
> I have gone through the process of creating a a library
item of a
> PopMagic menu according the the video provided by P7.
Works well.
> Then I added the library item to an existing DWCS3
template and saved
> it. When I attempt to create "new from template" page
from the template
> menu, I get this error message
>
>
http://www.jdcdemo.com/blf/error.html
>
> If I do the same with a template without the menu, the
> error message goes away.
>
> If I create a page with from a template where I've left
an editable
> region for the menu and then insert the menu and save
the page, I also
> get the error message, but the page seems to work ok.
>
> Since I can't create a new page with the template, I
opened it and saved
> it as
> a page:
>
>
http://www.jdcdemo.com/baim/BLF8/error-message.html
>
> What is going on here and is there a fix?
>
> Thanks,
> Joe
>

Similar Messages

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

Error message with hyperlink

Hi Champs,
I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
We are using SRM 4.0 Version.
I need to display the below error message with a hyperlink to a particular site:
Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
Is it possible to have hyperlink with an error message.
Thanks
Regards,
Nishant

Hello
It is no possible.
But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
In this case hyperlink will be available after double click on error icon in left bottom corner.
PS: and not duplicate posts.

When I try to open iPhoto I get the error message "The library "iPhoto Library" cannot be opened.

When I try to open iPhoto I get the error message "The library "iPhoto Library" cannot be opened. To open it, you must upgrade to the latest version of IPhoto." But the app store says that the latest version is installed.
I just migrated from 2011 macbook to new 2014 macbook with Yosemite on it.
Here is the main error - Dyld Error Message: Library not loaded: /Library/Frameworks/NyxAudioAnalysis.framework/Versions/A/NyxAudioAnalysis Referenced from: /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/iLifeSlideshow Reason: image not found
MacBook Pro 2.8 GHz Intel Core i7 16 GB 1600 MHz DDR3
OSX 10.10.1
IPhoto 9.6
Any help much appreciated.

There is a framework missing in your System library. You need to reinstall MacOS X to restore the dynamic library:
See:
Dyld Error Message:
Library not loaded: /Library/Frameworks/NyxAudioAnalysis.framework/Versions/A/NyxAudioAnalysis
Referenced from:
Have you run any cleaner applications that could have removed files, or installed third party software lately?
To reinstall the system, boot into Recovery:
See this page: OS X: About OS X Recovery
-- Léonie
Added:
How are you launching iPhoto? From your Dock? The Dock icon may still be linked to an older iPhoto version. Just to be sure, you are opening really iPhoto 9.6, launch iPhoto by double-clicking the iPhoto icon in your applications folder. Your crash log with the the "Library not found" error message should show the version number of iPhoto. Which version is it showing?

Error Message: iTunes library cannot be saved (50) and then iTunes crashes

I am running 64 bit windows vista, with itunes 10.7. I get the error message "Error Message: iTunes library cannot be saved (50)" once or twice and then iTunes crashes entirely. this occurs after a random amount of time using iTunes, and the library is in fact saving between incidents.

Resolved by my getting an iMac ...

At each startup, Itune10.2.2 reimports my library and i have an error message on library.itl that is damagd. A new one is created each startup.Any idea?

at each startup, Itune10.2.2 reimports my library and i have an error message on library.itl that is damaged. A new one is created each startup. I have tried uninstalling itunes, changed my antivirus but doesn't work

The following line tells me that this is not a template file, but a document created from a template called index.dwt
<html xmlns="http://www.w3.org/1999/xhtml">
This means that you saved a child document as a template file at some stage.
If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

Error message repairing library database keeps appearing in iPhoto in iMac

Why does the error message "repairing library database" keeps appearing?

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Displaying an error message with a link to the error field

By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
    //String messageText="No se han encontrado estos datos";
    FacesMessage fm = new FacesMessage(messageText);
     * set the type of the message.
     * Valid types: error, fatal,info,warning
    fm.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext context = FacesContext.getCurrentInstance();
    context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?

Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo

HT4910 My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

Error Message with multiple line

Hi
How to display a error message with multiple line?
Example
     Goods movement not possible for material 101
     Goods movement not possible for material 102
     Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
Asheek

Hi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
         EXPORTING
              OBJECT              = OBJECT
              SUBOBJECT           = SUBOBJECT
              UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
         TABLES
              MESSAGES            = MESSAGE_TABLE
         EXCEPTIONS
              OBJECT_NOT_FOUND    = 1
              SUBOBJECT_NOT_FOUND = 2
              OTHERS              = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

Error message -48 - library can't be saved

Hi,
I keep getting an error message "-48 - library can't be saved" when I open up itunes - anyone have any tips? any thoughts v v gratefully received!
thanks

I'm having this same problem. In my case the library file is on my main internal hard drive, but is partitioned to the e: logical drive. Permission should not be a problem.

Error message with library item in template

Similar Messages

Maybe you are looking for