Error message with Publisher attachments in emails.

When trying to open an MS Publisher document that's an email attachment, I get the following error message:  "Adobe Reader could not open xxxx.pub because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded.)"
In addition to Publisher, I have several other MS products installed -- and have no problem opening these documents when they are attached to an email.
Please help!!!  Thanks.

I do not know why the .pub file type is associated with Adobe Reader on your system.
The easiest way to re-establish the correct file association is to reinstall or repair MS Publisher.  Or you can right-click on a xxx.pub file, then re-associate the file type manually with MS Publisher.

Similar Messages

  • Error message with a script sending emails to multiple recipients.

    Hi all,
    I am very new with powershell scripting and I want to request your attention and help on this issue.
    I am getting this error message "Send-MailMessage: An invalid character was found in the mail header: ','" given by this script:
    Param (
    [string]$Path = "C:\Temp\",
    [string]$SMTPServer = "smtp.domain1.com",
    [string]$From = "[email protected]",
    [string[]]$To = "[email protected],[email protected]",
    [string]$Subject = "New backup file"
    $SMTPMessage = @{
    To = $To
    From = $From
    Subject = "$Subject at $Path"
    Smtpserver = $SMTPServer
    $File = Get-ChildItem $Path | Where { $_.LastWriteTime -ge [datetime]::Now.AddHours(-6) }
    If ($File)
    { $SMTPBody = "`nThe following files have recently been added/changed:`n`n"
    $File | ForEach { $SMTPBody += "$($_.FullName)`n" }
    Send-MailMessage @SMTPMessage -Body $SMTPBody
    I found the ForEach() approach but when I put it inside I get an infinite loop.
    Many thanks for any suggestions

    [string[]]$To = "[email protected],[email protected]",
    should be
    [string[]]$To = @("[email protected]","[email protected]")

  • HT4910 My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    Did another window open with the pasted information?  If so, try hitting "enter/return" key and "delete" key at the same time.  That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

  • TS3276 error message when trying to send email

    On my Apple Iphone 3G, using Rogers as a cell provider, when an email came in and I tried to reply to it, it came up with an error message " A copy of this email has been placed in your outbox. The senders (me) address "[email protected]" was rejected by the server."
    I have checked all the settings and they are exactly the same as those on my computer mail settings. I can receive mail but cannot reply to this email.

    First unlock your caps lock key. Typing in all caps is inappropriate in online forums (considered shouting) and is hard to read.
    iPhoto>Preferences>General. Select the email program or how you wish to email photos from iPhoto.
    (There is an iPhoto forum for iPhoto questions).

  • I get an error message "unknown publisher" when I download quicktime 7.7 for windows 64bit

    I am trying to download quicktime and I get an error message :unknown publisher".  I am using windows 7 64-bit operating system. Can anyone help me?

    Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
    Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
    Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

  • I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply.

    I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply. How can I get this to work when my internet is connected?

    Are you able to email from Mail with those two accounts?  If so:
    1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
    2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane.  This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

  • Error message when publishing from Captivate 4 to MS Word 2003

    Is anyone else getting an error message when publishing from Captivate 4 to MS Word 2003?  I tried all 4 types and still get the following:
    "An error was encountered while publishing to Word.  Verify the following and try again.  Word is installed on your system.  Word is not busy."
    Word is installed on my system and was not in use, so I am not sure why the error.  Any thoughts?
    Thanks in advance!

    Hi there
    I use Captivate 4 and it publishes to Word 2003 without issues.
    Perhaps it has to do with the way your Word 2003 has been installed? Either that or it's a "rights" issue to be addressed by your IT propellerheads?
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • HT204053 In iCloud setup my apple I'd is not accepting. Getting error message it should be  an email I'd, but my my apple Id is just in user I'd form? Please support.

    In iCloud setup my apple I'd is not accepting. Getting error message it should be  an email I'd, but my my apple Id is just in user I'd form? Please support.

    I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
    So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
    Thank you for any help you can give.
    Trish

  • When trying to use Java to scan checks in my financial software I get an error message, "The publisher cannot be verified by a trusted source. Code will be treated as unsigned."

    I am trying to scan checks in the USAA.com website and Java is giving me an error message: "The publisher cannot be verified by a trusted source. Code will be treated as unsigned."

    Serac wrote:
    Hi,
    I am occasionally running into an issue where I get the following error:
    "The publisher cannot be verified by a trusted source.Code will be treated as unsigned."
    I am not sure how to stop getting this error or what the root cause of the issue is.
    Any idea what could be causing this? and how I can get rid of it? is this a bug in the JRE?
    Thanks,
    DeeOn the contrary. It shows that Java takes your security very seriously and it will not allow
    hackers to format your hard-disk, get personal data etc.
    Google for signed applets.

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • Error message with hyperlink

    Hi Champs,
    I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
    We are using SRM 4.0 Version.
    I need to display the below error message with a hyperlink to a particular site:
    Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
    Is it possible to have hyperlink with an error message.
    Thanks
    Regards,
    Nishant

    Hello
    It is no possible.
    But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
    In this case hyperlink will be available after double click on error icon in left bottom corner.
    PS: and not duplicate posts.

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • Displaying an error message with a link to the error field

    By default, ADF validation usually displays an alert with an error message and a link to the error field.
    I have some custom validations where I finally display the error message with this:
      public static void MessageError(String messageText){
        //String messageText="No se han encontrado estos datos";
        FacesMessage fm = new FacesMessage(messageText);
         * set the type of the message.
         * Valid types: error, fatal,info,warning
        fm.setSeverity(FacesMessage.SEVERITY_ERROR);
        FacesContext context = FacesContext.getCurrentInstance();
        context.addMessage(null, fm);
    My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
    Is there any way to get this ?

    Can't you include this in your message?
    You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
    Timo

  • Error Message with multiple line

    Hi
    How to display a error message with multiple line?
    Example
         Goods movement not possible for material 101
         Goods movement not possible for material 102
         Goods movement not possible for material 103
    is it possible is ABAP? If so please advice me.
    Best Regards
    Asheek

    Hi Anoop,
    You can use same thing like this
    I suggest write ur message through this.
    First set the obecj.
    CALL FUNCTION 'APPL_LOG_SET_OBJECT'
    for local memory
    FUNCTION 'APPL_LOG_WRITE_MESSAGES'
             EXPORTING
                  OBJECT              = OBJECT
                  SUBOBJECT           = SUBOBJECT
                  UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
             TABLES
                  MESSAGES            = MESSAGE_TABLE
             EXCEPTIONS
                  OBJECT_NOT_FOUND    = 1
                  SUBOBJECT_NOT_FOUND = 2
                  OTHERS              = 3.
    the call for physical memory
    CALL FUNCTION 'APPL_LOG_WRITE_DB'
    In this process you only need to provide the Itab with error messages.
    Reg,
    Arpit

Maybe you are looking for