Error message with Soundtrack after installing on new MacBookPro
I just installed FCStudio v.2 on my new MacBook Pro and did all necessary software updates. I checked all my system requirements and they are fine (it is a brand new MacBook Pro) but when I launch Soundtrack, I get this message:
"This machine does not satisfy the minimum required hardware requirements to run this application"
Any ideas?
Not an upgrade. When initially purchased, installed and worked perfect until hard drive died and I had to re-install the program on the new hard drive. That is when the issue began.
Similar Messages
-
How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer
Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us. -
I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.
AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
I keep getting an error message saying "It looks like you have a flash blocker browser settings or extension. Please enable flash to hear sound" error message come up when I try to play music in Soundcloud. I have just installed Firefox on my laptop and upgraded to the latest Flash player. I then tried down grading to Flash 10.3 but this didn't help. I have been watching programs in iplayer and had no problems there. Please help!
I have been through this process several times. It sometimes works and sometimes it doesn't. Running in safe mode proves nothing.
Youtube videos work fine. So flash is working. Hosts file is the default one so nothing blocked). No sit blockers etc. all disabled in add-on manager.
Old Soundcloud works fine. Sometimes the new one does. Most of the time it does not.
Switch to IE8 (yuch) and this gets even worse. Old SC works but new one says I need an update and provides a link. I click the link and MS site says I am a;ready running the most up to date browser.
Bottom line...
1) if you use IE, better go to Windows 7 or 8. Otherwise Soundcloud should be avoided. Sure, the old SC still works ... for now.
2) if you use Firefox, roll dem bones and see what ya get. Maybe it will work. Maybe it won't. But it's a pain to have to keep clearing the cache and cookies to fix the one and only site that has this issue with Firefox 18.
3) go to Chrome if you love google. It seems to be OK.
4) ignore soundcloud all together. It's not going to survive long in this mode. -
Getting error messages upon startup after installing Lab View 5.1.1.
I have recently purchased a DAQ system along with a computer, which uses a readout program written in Lab View. however, after installing Lab View 5.1.1 on this same system, I started getting some error messages and the readout program no longer works. Here are the error messages:
"The \SystemRoot\system32\drivers\nidmmk.dll device driver could not locate the entry point ?single PointWrite@mdsSimpleDIGPortPrimitive@@UAEXKKKAAJ@Z in driver Nidaq32K.sys"
as well as
"The ordinal 2011 could not be located in the dynamic link library nidaq32.dll. An error occurred while loading VT Digital buffer write.vi"
I would greatly appreciate any help I can get.Hello,
Installing LabVIEW should not effect an installation of NI-DAQ. However, it seems to me that we may have installed a different version of NI-DAQ on top of the current version. This is very possible because the old LabVIEW CD�s contain NI-DAQ on them.
In this case, there is not an easy solution, we could try uninstalling and reinstalling combinations, but it will probably save the most time and effort to uninstall all National Instruments products and reinstall them. The best way to do so is from the ADD or REMOVE Programs utility from the Control Panel. Then we want to remove the following registry keys (BE SURE TO BACKUP YOUR REGISTRY!!)
HKEY_CURRENT_USER\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed. If you have Administrative rights, and you still cannot delete these keys, that is also OK. Continue with the remainder of the process.
Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp", "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a different location. If you are concerned about keeping old virtual channels and your SCXI setup intact, then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
Once these steps are taken care of, we should have clean system. You probably want to reboot and then reinstall the software. You should install development environments first, and then install drivers.
Just let us know if this does not take care of the problem, or if you have any questions on how to complete a step of the process.
Best regards,
Justin T.
National Instruments
NOTE: Turning off virus scan programs greatly increases the speed of uninstalling and reinstalling. -
Error message when trying to install a new windows 7
Hi I am using a pavillion dv6 2140ei. My hard disk crashed so I bought a new one and now when I try to install windows I get a message saying "windows cannot be installed to this disk. This computers hardware may not support bootingh to this disk. Ensure that the disks controller is enabled in the comupeters BIOS menu.
I was using windows 7 ultimate 32 bit, which is the same windows I am trying to install now.
Thank youMAGCINA wrote:
Hi I am using a pavillion dv6 2140ei. My hard disk crashed so I bought a new one and now when I try to install windows I get a message saying "windows cannot be installed to this disk. This computers hardware may not support bootingh to this disk. Ensure that the disks controller is enabled in the comupeters BIOS menu.
I was using windows 7 ultimate 32 bit, which is the same windows I am trying to install now.
Thank you
Hi,
You could disable AHCI in the BIOS settings (if possible). I have also noticed that some people used a live CD of Ubuntu or any other linux live environment and in Disk Utility or the default disk managament app set the drive/partition as bootable. Fdisk should also work.
http://tldp.org/HOWTO/Partition/fdisk_partitioning.html
The boot flag should be in your case(mine as well) on sda1 as the small partition for Windows.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"* -
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.
http://www.digitalrebellion.com/fcsremover/
-
My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html -
My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?
Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.
-
I receive an error message when trying to install Adobe Acrobat 6.0 on my new PC that has windows 8.1.
Can someone help me?
thanks!And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
Mylenium -
I am trying to download new version of iTunes from App store having purchased it on my laptop. When I try to download on my iMac I get the following message:
Error message when I try to download new iTunes as follows: iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store - and then I am asked if I want to buy it again. I don't understand the error message and I don't want to purchase the new version again.
Also, since upgrading to Lion my videos (from Sanyo Xacti camera) do not play on iTunes. I can only open photos.
Thank you.Make a back up of your Library. Now you can update without fear.
Regards
TD -
After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?
My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite. -
I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
Any ideas for a fix?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.
Maybe you are looking for
-
QuickTime video in standalone app
Hi, I've noticed that I can publish Director desktop apps that play Flash content with no player required on the user's comp. Is this the same with QuickTime video? Or do the users need to install QuickTime player. If so, what QuickTime version does
-
Differences between 9.2.0.1 & 9.2.0.5
Hi, A new client has Oracle 9.2.0.5 and we have Oracle 9.2.0.1. I am trying to find Release Notes and information on the differences between the two revisions. I need to determine if an Java application written against an Oracle 9.2.0.1 database will
-
I hate Outlook, how do you actually search by sender like in Gmail?
Bare in mind the more you cache offline the more space you need locally - if you had a 50GB mailbox and had 45GB used, and choose to cache all files, you'd need 45GB plus additional space for index, and the DB extras, so probably close to the 50GB ma
-
Would I be able to print wirelessly from my Macbook Pro to an HP1606dn printer?
Would I be able to print wirelessly from my Macbook Pro to an HP1606dn?
-
Lumia 800 - positioning the cursor
Hello Lumia fans, while typing a text message - its very hard to position the cursor before or after a particular letter. instead it selects the whole word. its so annoying.. and how to copy the entire text message in d sms?? Solved! Go to Solution.