Error Message - Won't Let Me Use My Memory Chip

I need help. I turned off my phone today and when I turned it back on this message came up, "A Media Card has been inserted that contains errors. To correct the errors please use a disk error-checking utility on a computer." I previously had songs, ringtones, pictures, etc on the media card and now it won't let me access them. I hooked it up to my computer hoping it would automatically fix itself but it didn't. However, when I brought up my media manager it would let me click on my media card as if it were still there and all of the media was still there. But the same message appears. I've tried taking out the media card and everything. PLEASE HELP.

I had the same problem only when I ran the disk error checking utility, it did seem to scan and fix a huge number of issues, only I still get the same error message and now I cant seem to access my SD card from my phone. Also, when I hook up my phone to the computer I am able to view most of the pictures but not all of them. The pictures that I cannot open do not seem to be readable. They are saved as weird symbols and I cant seem to view them or save them as picture files. Can I still recover these pictures and how can I resolve this error message??? Please help

Similar Messages

Unable to login error message. won't let me use efax for past 2 weeks.

called efax they said it was an hp problem. downloaded all updates. uninstalled and reinstalled printer(envy114). still same error message.

Hi @mcaldwell,
Welcome to the HP Support Forums. I see that you are encountering difficulties when trying to use the eFax feature of your Envy 114 printer.
I have included a link to a post by @PrintApper titled eFax users - please read. If you prefer to speak to someone, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

J6480 Ink Cartridge Door Hinges Broke. Door Open error message won't let me print. What can I do?

Have always been very careful with cartridge & scanner doors. Pressing OK doesn't remove error message. Broken hinges will no longer go down, so Door Open message won't go away and preventing printing.

The problem is the spring tension used to hold the cover open is stronger than the poorly designed weak hinges.
The way I solved it was to break both the hinges, (pretty easy to do just open and close the cover a few times), lift the cover up being carefull not to break the ribbon cable (wires) from the cover to the base. Then I pryed out the lower spring plates, these are located in the hinge assembly of the printer and removed the black plastic plunger and the large springs below it from both hinges. The cover wil now stay closed and allow you to print. You just have to be careful when changing the print cartridges as the cover can open too far now and possibly break the wires going to the top cover.
Happy Printing

Error message - won't let me burn any dvd's

Hello
Tried a couple of times to burn this DVD project using DVD SP 4.1 and the first DVD went well, tried a second one got this error message...tried a different dvd got the same message:
Formatting failed
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
Never saw this before - fix?
Thanks
KB

Also get this in the build log - don't know if this is a problem or not...
Warning: The directory ‘/Volumes/All Media/DVDSP4_projects/Wedding 2004’ will not be included in the final disc.
Warning: The directory ‘/Volumes/All Media/DVDSP4projects/JACKETP/PAR’ will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘WEDDING_04.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Thanks
KB

ITunes Error Message Won't Let Me Finish Syncing...

When I sync my iPod it comes up with and error message that says "Error occured reading iPod, the disk could not be read from or written to." I was wondering if anyone else has had this problem, and if they may have found a solution that they would be willing to share... I would appreciate the help...
Thanks!

this message can show up on Macs too.
this document is a good place to start:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
... but if you're connecting to a Toshiba laptop, first see:
iPod not recognized correctly on Toshiba laptop

General Error Message Won't Let Me Save

Hello,
I was editing an HD video earlier and I switched my audio/video settings to sequence preset DVCPRO HD - 720p24 - my capture present to DV NTSC 48 Khz (since im not capturing. i pulled files off an external hard drive - my device control preset was on SONY HDV FireWire. My video playback was on apple firewire DVCPRO NSTC 720x480. I opened another project and switched my user settings to regular DV NTSC. when I got back on my HD video, it showed that I needed unexpected rendering. When I rendered it gave the "general error" message. I had to select each clip that needed rendering and move it a little, then re render the selection. when I went to save the project it gave me the same "general error" message. I need to export this project to qucktime ASAP to put on a DVD. what should I do? pleeeease help......
thanks in advance.
and am I royally screwed????

sounds like you have some corruption going on, or perhaps a permissions issue (though I think that's less likely). Here are some things I'd try.
Create a new sequence with the proper settings for your footage. Copy all the clips in your old sequence and paste into the new sequence.
Create a new project with a new sequence. Copy and paste the clips of old sequence into the new sequence of the new project. Save As and give it a new file name.
Check the pathway to your Render folder and your Save folder. Make sure that permissions allow for READ AND WRITE all the way down. In other words, if your render folder is in:
Harddrive/FCP/Render
Then make sure all three have READ WRITE permissions applied. Do this by selecting them one by one and hitting CMD+I for info. Then look at the permissions.
Hopefully one of those options will help.
Andy

Quicktime error that won't let me use iTunes

I have used an iPod video 60GB since Dec 2005 with Windows XP Pro. Recently, my Quicktime Pro began to show a failed codec type-thing when I would try to play a .mov. I uninstalled Quicktime Pro and attempted a reinstall but it will not allow me to install anything before version 7.1.3.
I unistalled iTunes, pondering if I could refresh the system and registry, and reinstalled iTunes+Quicktime, but it still will not allow me into iTunes or use Quicktime Pro even after I payed for the key again.
Frustrating. Any suggestions?
Dell Dimension 8200 Windows XP Pro

I have the same problem, but I can't get past step 1. I can't uninstall the existing Quicktime. It says "fatal error during installation". No matter what I do, I can't get past that step. I try to repair it first, in hopes that I can uninstall it after the repair. But during the repair process, it asks me for the install folder where quicktime.msi can be found, and I can't find it on my system anywhere. It's almost like the uninstall utility has already removed that file in its attempt to uninstall the software, but didn't go all the way. Now, it seems, I'm stuck between a rock and a hard place. Any suggestion?
Quicktime version 7.0d0 is installed, iTunes
requires Quicktime version 7.1.3 or later.
okay. let's try a slightly different method of
swapping out your QuickTime, involving a few extra
explicit precautions.
head into your Add/Remove programs. uninstall
QuickTime.
Next, we’ll manually remove any leftover program
files and folders.
1. On the Start menu, click My Computer (or
double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click
Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and
QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your
PC by doing a repair install of
itunes.
switch off antivirus and antispyware applications
prior to the repair install.
go into Add/Remove and select itunes. click "Change"
and then click "Repair".
if the repair install goes through okay, restart the
PC and try launching itunes again. does it launch
properly now?

Firefox 37 keeps crashing, Plugin-hang...aplication error message, & won't let me update Adobe Flash player

Ever since I updated to Firefox 37 my Firefox has been crashing. It started only doing it periodically, then it got so that if I scrolled down a page it would close. Then it got to the point where as soon as I opened Firefox it would immediately crash every time. I ran antivirus and Super AntiSpyware and rebooted, but it only let me into Firefox, nothing would load up. They only way I am able to be on right now is through my computer's "safe mode".
I have tried repeatedly to update Adobe Shockwave Flash Player, but when I click "run" the box disappears and nothing happens from there. It just won't update.
I am on a Windows XP computer which, as we know, is no longer supported by Microsoft, but am I really this SOL?
All scans say I am clean, BTW.
I am afraid to reset Firefox because if I can't update the flash player now, who can promise me I will be able to get anything back if I reset Firefox?
I am moments away from getting my hammer and having a meeting with my computer in the backyard, if you know what I mean. Please help.

''1fitcaligirl [[#question-1056975|said]]''
<blockquote>
Ever since I updated to Firefox 37 my Firefox has been crashing. It started only doing it periodically, then it got so that if I scrolled down a page it would close. Then it got to the point where as soon as I opened Firefox it would immediately crash every time. I ran antivirus and Super AntiSpyware and rebooted, but it only let me into Firefox, nothing would load up. They only way I am able to be on right now is through my computer's "safe mode".
I have tried repeatedly to update Adobe Shockwave Flash Player, but when I click "run" the box disappears and nothing happens from there. It just won't update.
I am on a Windows XP computer which, as we know, is no longer supported by Microsoft, but am I really this SOL?
All scans say I am clean, BTW.
I am afraid to reset Firefox because if I can't update the flash player now, who can promise me I will be able to get anything back if I reset Firefox?
I am moments away from getting my hammer and having a meeting with my computer in the backyard, if you know what I mean. Please help.
</blockquote>
Thank you so much for responding. I appreciate your help very much. There are TONS of these reports without "BP" in front of them. Most all reports are without a "BP" in front of them. They take forever to load from Archives and once I do get one loaded I can't locate a "submit" tab anywhere.

This error message won't let me install a 3rd party app. need a guru. help me ob1.

i get this error everytime i try to run setup on a particular app.
could not load the dll library c:\documents and settings\owner\my documents\palm os desktop\userdata.dll. the specified module could not be found.
i did an online chat with a palm rep and he couldn't help. the provider of the app can't help either.
thanks in advance.......
Post relates to: Tungsten E2
This question was solved.
View Solution.

the application is called aapalm which is a program for archery arrow tragectory. it is a palm app. when installed on the computer, it is supposed to load into the handheld at next hotsync.
archersadvantage.com
Message Edited by avid3d on 06-02-2009 10:55 AM

Strange Error Message - won't let me sync

I've been able to sync 107 of the 232 songs in my iTunes library. When I try to sync so that the other songs will appear on my iPod I get the message:
"Attempting to copy to the disk 'KDESCH'S IP' failed. The disk could not be read from or written to."
Is there something wrong with my version of iTunes? I feel like I'm miising a file or something. Any suggestions about how to solve this. It's very frustrating. I got some songs on my iPod but not nearly all of them. UGH!!

so my computer crashed a while back and i redownloaded itunes on my new laptop. when i tried to put new songs on my ipod it says i need to sync my ipod. is there a way i can do this without having to start over, so i dont have to take the time to put on each and every one of my cds on it? it took a long time and i just want to add more songs. can anyone help me. what does it mean to consolidate your library, can that help me?

I am having trouble with face time , it was working well yesterday and today am not able to use it due to an error that won't let me log in !!!

I am having trouble with face time , it was working well yesterday and today am not able to use it due to an error that won't let me log in !!!

I have the same exact issue. There is number of these post, but still not an answer. hope someone post an answer soon

I bought a text message tone on iTunes and it won't let me use it as a message tone??

I bought a text message ringtone tone from iTunes and it won't let me use it as a message tone... Only as a ringtone

What does won't let you use them mean exactly?

Error message when launching PowerPivot Window using Excel 2010

I have installed the latest version of Powerpivot on several of our workstations. Some of them are running the application just fine and some of them are getting an intermittent error message when trying to launch the PowerPivot Window.
We are running Windows 7 ENT 32bit with Office 2010 32bit
The error message given is : An operation that uses the database driver could not be completed. If the driver is a Microsoft driver, make sure the drvier file isn't damaged, and if it is, reinstall the driver by re-installing Microsoft Query.
You can then try again and it will work.
In fact the majority of the time this error message won't appear.
The application has been removed and reinstalled.
When I checked event viewer i'm finding this error which I think is related
The description for Event ID 1 from source MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

I get an error message when I try to use share function on IPhoto. I get the triangle icon with an exclamation mark inside of it.

I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Error Message - Won't Let Me Use My Memory Chip

Similar Messages

Maybe you are looking for