Error message: 'you can't open the application because the Classic environment is no longer supported'

I get the error message 'you can't open the application because the Classic environment is no longer supported', when will this issue be fixed? I need to use a program to analyse videos called 'J watcher' that is vital for my thesis. It worked in the last operating system but refuses to open in this one. When will this issue be fixed/what can I do about it?

Is there any way to fix this?
Yes, but it's not easy.
I've only tested this on Snow Leopard, but I think it will work in Lion. You need to have Java installed, which it's not by default in Lion. Since I'm not using Lion myself, I can't tell you how to do that.
Download the Java/Mac version (1.0) of the application from JWatcher Downloads. You'll get a zip archive. Expand it. Now you have an application called "JWatcher_V1.0." This is only the installer. It won't run, because it has PowerPC-only version of the Java application stub.
Select the line of text below in your browser and copy it to the clipboard:
/System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/MacOS
In the Finder, select Go > Go to Folder... from the menu bar (this menu may be slightly different in Lion.) Paste the clipboard contents into the text box. You should now see a folder with two files in it, one of which is named "JavaApplicationStub." Leave that window open.
Now right-click on the icon of JWatcher_V1.0 and select "Show Package Contents" from the contextual menu. A new Finder window opens. Open the folder called "MacOS". Inside that folder is a file also named "JWatcher_V1.0". Move it to the Trash. Drag the file JavaApplicationStub to where it was. Rename the file (it will be copied, not moved) JWatcher_V1.0. Close the Finder window.
Now double-click the installer. It should launch. Install the application wherever you choose. You're not done yet.
The installer creates a folder named, once again, "JWatcher_V1.0". Inside it is an application. That, too, is named "JWatcher_V1.0". Select it, and do exactly the same thing you did before with the installer: replace the binary inside with a copy of JavaApplicationStub.
You should now be able to run it.

Similar Messages

After migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC.

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
Does anybody know if this is fixable or if I need to just buy a new disk?
Thanks!!!

I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
Does a macbook pro meet these requirements?

Got an error message "You can't open the application iMovie because it may be damaged or incomplete" What do I do next to try to fix? Thanks.

I tried accessing imovie after not using it for a long time and got an error message "You can't open the application iMovie because it is damaged or incomplete. I'm not sure how to go about addressing it. Your suggestions would be very much apprecaited.

Judging by your OSX, I presume that your iMac would have come with 2 installation discs.
iMovie and all the iLife software will be on disc 2.
Run the disc and re-install iMovie.
After that, do a software update.,
Best,

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan

New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.

I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?

I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?

QUESTION: Were you induced to upgrade to Mavericks after seeing this dialog box?

Error message "You can't open the application SETUP because PowerPC applications are no longer supported". How can I fix it?

I tried to install the SmartMusic Studio, but a error message appeared "You can't open the application SETUP because PowerPC applications are no longer supported". How can I fix it?

denise.lombardi wrote:
I tried to install the SmartMusic Studio, but a error message appeared "You can't open the application SETUP because PowerPC applications are no longer supported". How can I fix it?
Download
SmartMusic 2012a
It is compatible with Lion

Tried to install a new game but got error message "You can't open the application "XIII Install" because PowerPC applications are no longer supported." I have since read that Yosemite doesn't have the program. What can I do?

Tried to install a new game that I bought (Xiii) for my MBP. All system req have been met and exceeded, however when trying to install it I get an error message saying "You can’t open the application “XIII Install” because PowerPC applications are no longer supported."
I have since read online that the operating software Yosemite has got rid of PowerPC applications, meaning I can't install my new game.
Is there anything simple that I can do to get this game to work. I'll be gutted if not as I have opened the game therefore the shop will not give a full refund, I'm sure .
Regards
Simon

A lot longer ago than that. PowerPC apps haven't been supported since Lion, 10.7.x.
You may have just purchased the game, but the developers obviously haven't kept up to date with the requirements for newer versions of the Mac OS.
You have three options, depending on how old your Mac is.
1) If it were ever able to boot directly to Snow Leopard, you could create a separate partition and install SL onto that partition. Make sure to turn on the option during the installation to install Rosetta. That is OS X's PPC emulator.
2) If your Mac is too new to install Snow Leopard, then you can purchase and install Snow Leopard Server within a VM, such as Parallels, VirtualBox, or Vmware.
3) Use a separate older Mac for running outdated software.

I have the current iPhoto when I try to open it I get an error message You can't open your current photo library using this version of iPhoto

You can’t open your current photo library using this version of iPhoto.
I am using the current iPhoto and O/S 10.8.2

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Whenever i try to backup my Iphone 4 i get an error message " Itunes can not backup (my Iphone) because the backup was corrupted or not compatible with the Iphone"

whenever i try to back up my iphone it gives me an error message "itunes could not back up (my)iphone because backup was corrupted or not compatible with your iphone" i already deleted the itunes backups through the prefrences tab. this has not helped. what am i doing wrong?

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

Message: You can't open the application Firefox because it may be damaged or incomplete

I've been using Firefox for a long time. Today I decided to change the settings to delete my history when I closed the window. Now when I try to open up Firefox I get a continuous pinwheel. I deleted Firefox from my computer and reinstalled, but it still won't work. There's now a grey icon titled Firefox with a square and a circle and line through it. When I try to delete this icon, it won't let me, saying Firefox is still running. When I try to open the icon, I get the following message: "You can't open this application Firefox because it may be damaged or incomplete."
Any suggestions on what to do?

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Getting message: 'You can't open your current photo library using this...

Hello,
I use iPhoto 6.0.6. After inserting a CD with a friend's photos, I got the error message: 'You can't open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.' The only option is to quit.
This now happens every time I try to open iPhoto. I have tried to upgrade, but am I right in presuming that I need to pay for anything above 6.0.6 (which I don't want to do at the moment)?
I get the message every time I open iPhoto, meaning it is completely unusable.
Please can anyone help?
Kind regards,
Dan

Hi, honeytrappist. Any time iPhoto has access to any iPhoto library that was created by a later version it will put up that error message. When iPhoto burns a CD, it creates an iPhoto Library on the CD. So if someone with iPhoto 7 gives you a CD burned in that version, it's going to result in that error message whenever the CD is in your Mac and you try to open iPhoto 6.
If someone who has iP 7 wants to give pictures to you, ask him to export them to the desktop and then burn you a CD in the Finder. That way they won't come packaged in an iP Library, the error message won't appear, and you'll be able to import them right into your own library.
With a CD that does produce the error message, what you'll have to do is quit iPhoto, extract the pictures you want from the library on the CD to a folder on your desktop, eject the CD, and then import the pictures into iPhoto.

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

Error message: 'you can't open the application because the Classic environment is no longer supported'

Similar Messages

Maybe you are looking for