Error messages are not posted into ECH using collect method

In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

Hi,
Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
CALL METHOD i_ref_registration->collect
   EXPORTING
     i_single_bo      = input
     i_component      = 'ZSWC'   "Software component defined while FEH customisation
     i_process        = 'ECH_BP' "ECH Business process defined while FEH customisation
     i_error_category = lc_errcat
     i_main_message   = wa_error
     i_messages       = lt_error
     i_main_object    = wa_object.
Here while populating the wa_object, the objtype field should be populated with the object type defined while FEH customization.
If all these things are done, then this should post the error.
Regards,
Abijith

Similar Messages

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

JSF: Error Message are not getting cleared

Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
    HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
    DownloadResponse.sendDownload( response, is, fileName );
    faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

How do i check the list of invoices which are not posted into sap.

Hi All,
Iam displaying(ALV) the list of invoices and epayments for both PO & non PO transactons which are being processed in workflow but not posted in sap.
(Non po transaction is th eone with out reference of a PO)
How to check and list out the invoices that are not posted in sap. where does this get stored.
please help.
Thanks
jyothi.

Hello Jyothi,
U can give try with EKBE table for getting invoices for PO. In this table there is a field vgabe which has various status. U can try that. Now for Non PO, u would be directly creating invoice doucment using FB60(i guess) which would create an entry directly into BKPF/BSEG. U can scan BKPF for the date range company code document type KR which vendor invoice.

Error message area not expanded per default - but i want it expanded

Hello,
per default the error message area in web ui is NOT expanded. But I would like to have it expanded per default. But i cannot find the right area to change this behaviour.
Does anyone have an idea how to change it to be expanded per default?
Many thanks for your ideas and input.
BR Andreas

Thanks to your reply i found it pretty well documented in help.sap.com:
http://help.sap.com/SCENARIOS_BUS2010/helpdata/EN/cb/659ebfc880493baad66896518a55a1/frameset.htm
Edited by: andreas lehner on Jan 30, 2012 10:01 AM

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Exchange Server 2013: incoming messages are not delivered into user mailboxes occasionally

Exchange Server 2013 CU1, two mailbox servers (DAG, only one mail database), two CAS servers (NLB cluster). Two Sendmail/CentOS-based SMTP relays route mail between Exchange servers and Internet (incoming mail is routed to NLB cluster name).
Usually mail flow is OK: messages are sent and received normally. However, I've got several complains from different users. They state that occasionally they don't receive messages that were sent to them from outside. Tomorrow morning I've decided to
investigate the issue.
So, we have a message sent from Gmail account that was not delivered in user mailbox. It was received and routed to Exchange by Sendmail host:
Jun 27 22:06:37 MX01 sendmail[12169]: r5RG6HC8012166: to=<USER_ADDRESS>, delay=00:00:19, xdelay=00:00:19, mailer=smtp, pri=124702, relay=NLB-FQDN [NLB-IP], dsn=2.0.0, stat=Sent (<CAHgK_sjEkj41htuVsutMP3XhgR5RRDs8-EgSC-UfHoaiHWFj=A@mail.gmail.com>
[InternalId=13069585481819] Queued mail for delivery)
Running Get-MessageTrackingLog applet on the mailbox servers displayed the followed log entries for the message:
DB Server #1:
    22:11:18 HAREDIRECT
    22:11:18 RECEIVE
    22:11:18 AGENTINFO
DB Server #2:
    22:11:18 HARECEIVE
    22:12:44 HADISCARD
So, we can see that the message was placed into shadow queues, but was NOT delivered into mailbox (no DELIVER status entries). Also pay attention to the timing. Time on all the servers is in sync, but Sendmail timestamp is 22:06, and Exchange timestamps
are 5 minutes behind it.
Today a message sent to the same address from the same Google mailbox was received by Exchange and placed into user mailbox with no glitches.
We use Exchange antispam system activated on Exchange mailbox servers. Spam is never dropped silently. It is either returned to sender (SCL 9) or placed into quarantine mailbox (SCL 6 and above). I'm pretty sure that the lost message was not in the quarantine
mailbox this morning, and the sender didn't receive any NDRs.
Any ideas what to investigate next?

Hi,
Do you mean the emails are placed in the Shadow Redundancy queue?
Shadow Redundancy
http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Some of the error idocs are not falling into Workflow Inbox

The extract of IDOC list with status 51 from WE02 transaction is not matching with Workflow inbox column "object", some of the idocs which are errored are not showing in the workflow inbox. Here we are in need to get all the errored idocs into the inbox. Please suggest me to proceed further.

Hi Smita,
Thanks for your reply.
I have maintained the suggested role SAP_GRC_SPC_SCHEDULER in backend for an user id and i can able to see a job is getting completed in SM37.
However, the task in the inbox hasnt come yet.Any idea you may have as to how much time it will take for task to come into inbox.Or is that i need to do any more extra task.
Please advice.
Thanks
Ashok S

Mail- new messages are not posting

mail does not post my messages, in all my accounts.

Hello susan:
Welcome to Apple discussions.
Try rebuilding the mailboxes.
If that does not help, please post more specific information about your problem.
Barry

Messages are not coming into my inbox...

Can anyone help??
My mail activity says I have messages that are being received but they do not seem make it into my inbox. I can access the emails as they are redirected via my pop account, but its a pain.
Does anyone know why messages would suddenly stop arriving?
I am a complete beginner, but I set it up 2 years ago and its been fine till now.
Cheers guys.

Hi SOLVED IT !!
In Mail, i clicked on the gear wheel icon - bottom left of Mail window, clicked on Get Account Info - then on Messages on Server - there were titles of all messages I'd seen on mail2web.com but not downloaded to my Inbox in Mail.
Noticed that there was a message with no title and Sender Unknown, it was 25MB !!! Deleted it, and all fine now !!! Hope this works for you. Not sure if Mail didnt like one mega message or if the Inbox was at capacity - do have 1800 messages in there - its my memory box !! good luck Chris

TS1627 I can receive my mail on my iPod and iPhone, but the messages are not coming into my macbook pro.

When I set up my two email accounts on my new mac, I was receiving mail just fine, and I could check it on any of my 3 devices, and view read or unread between the devices. Now no mail is getting through to my laptop. Any ideas??

Hello annasus77,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Have a nice day,
Mario

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Error messages are not posted into ECH using collect method

Similar Messages

Maybe you are looking for