Error messages during booting of Solaris 8 zone

I have installed a Solaris 8 zone from a flash archive of a Solaris 8 server that is currently in production. I get no errors during the installation of the zone and when I boot the zone I get the following messages on the zone console:
SunOS Release 5.8 Version Generic_Virtual 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved
Hostname: madison1xl
The system is coming up. Please wait.
NIS domainname is eam.rjf.com
operation failed, Not owner
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
device name given is not a stream device (No such device or address)
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
operation failed, Not owner
Sun BluePrints network security settings applied.
syslog service starting.
I am not sure what is causing these errors. The zone appears to be running properly, but I am concerned that something is not starting during the boot process. /var/adm/messages file does not show any errors. Thanks for any help you can give me.

Thanks. That helped alot. I found out that all the messages came from a start up script named nddconfig. Since the ngz cannot change anything about devices this was causing a lot of errors. I stopped the script from starting and now do not receive any errors.

Similar Messages

Error Message During Vista Install W/ Bootcamp

I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!

"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Error messages during vista startup

Hi,
i have strange error messages during Vista 65 loading. Everzthing going well but sistem is booting really slow.
Don't know how explain this except some screenshoots. They are uploaded on link under.
screenshoot1
http://www.shock.co.ba/DSC00116.JPG
screenshoot2
http://www.shock.co.ba/DSC00117.JPG

Hi dotshock,
try this procedure http://www.lancelhoff.com/2008/09/29/unrecognized-partition-table-for-drive-80/
Hope it helps
Stefan

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Error message during processing in BI

1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
   Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
   Update ( 0 new / 0 changed ) : Errors occurred
   Error records written to application log
   0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
   0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
   Error 4 in the update
3. Process chain error
these are the error details.

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Tim

download the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software.

Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks Tim

You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Error Message at Boot-Up

WRT54GX router with Wireless-G adapter ; I get the following error message at boot - "Query My Ca Information: InfoMyCa.exe - Ordinal Not Found - The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll "
Any help eliminating this message would be appreciated .

Hi Bettybee2, and a warm welcome to the forums!
As for deletion, feel free to switch iDisk Sync off and then toss the disk image. If you see a warning that the file is busy when you try to empty the Trash, log out and back in again and then empty the Trash.
http://www.macworld.com/article/134651/2008/07/massiveidiskarchive.html

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Laptop mode -- where to find error messages on boot

Hi guys,
I get some error messages when booting. I have the time to read that they are related to laptop-mode, but they quickly disappear.
I have activated the ENABLE_LAPTOP_MODE_TOOLS in my laptop-mode.conf file, but I can't find the error messages in /var/log :
/var/log » ll nico@cotier
total 2152
-rw-r--r-- 1 root users 24082 20 mars 11:30 Xorg.0.log
-rw-r--r-- 1 root users 24084 20 mars 10:35 Xorg.0.log.old
-rw-r--r-- 1 root users 28050 1 juin 2013 Xorg.1.log
-rw-r--r-- 1 root users 27492 1 juin 2013 Xorg.1.log.old
-rw-r--r-- 1 root bumblebee 13679 1 juin 2013 Xorg.8.log
-rw------- 1 root utmp 18816 20 mars 10:18 btmp
-rw------- 1 root root 32032 20 mars 11:29 faillog
drwxr-xr-x 2 root root 4096 16 juin 2013 httpd
drwxr-sr-x+ 3 root systemd-journal 4096 1 juin 2013 journal
-rw-r--r-- 1 root root 292292 20 mars 11:29 lastlog
drwxr-xr-x 2 root root 4096 14 mars 2013 old
-rw-r--r-- 1 root root 159892 19 mars 14:55 pacman.log
-rw-r--r-- 1 root root 77572 5 oct. 00:47 pm-powersave.log
-rw-r--r-- 1 root root 3586 1 juin 2013 slim.log
drwxr-xr-x 2 root root 4096 9 mars 2013 speech-dispatcher
-rw-rw-r-- 1 root utmp 1745280 20 mars 11:45 wtmp
Do you know where they might be?
Thanks!

grep all these logs and systemd's journal.
If you have 'quiet' on the kernel line of your bootloader, remove it.
Last edited by karol (2014-03-20 11:52:42)

Error message during start up

Hi, I keep getting an error message during the start up: "/Library/StartupItems/KYTXStartupitem" has not been started because it does not have the proper security settings. I have already removed the program, but the message doesn't desapear. I had check the library and the folder: Startup item its empty. What can i do?

Mac OS X v10.6 or later: "Insecure Startup Items folder" message appears after logging in - Apple Support

Error messages during booting of Solaris 8 zone

Similar Messages

Maybe you are looking for