Error Messages in FPM

hi,
How to trigger error messages in FPM ?
I have added one custom field in Standard Travel Component and have to validate the same.
Error messages with Focus on Attribute has to be done.

done with this on my own.
Use this method :
CALL METHOD wd_this->FPM_API->REPORT_BAPIRET2_MESSAGE.

Similar Messages

Stop navigation in FPM on error message

Hi All,
I am working on FPM framework . I am raising error message on click of the review button.
I have a requirement to stop the navigation further on error message.
User must click the flight details custom button before clicking the review button.unless the flight details button is not clicked user should not go to the next screen.
I hope I am clare
any inputs
Thanks
Santosh

Hello Santosh,
it just an idea...
1/ Set a flag (default abap_false) attribute to true when flightdetails is clicked in the controller of your component as Lekha said;
2/ If your review custom button is part of the FPM toolbar, as I suppose it is, you can trigger the event in the controller process_event method, check if flag is true else call the FPM message manager.
for example with a T100 msg:
CALL METHOD wd_this->mr_message_manager->report_T100_MESSAGE
     EXPORTING
       IV_MSGID          = 'MSGID'
       IV_MSGNO          = 001
       IO_COMPONENT      = wd_this
       IV_SEVERITY       = if_fpm_message_manager=>GC_SEVERITY_ERROR
       IV_LIFETIME       = if_fpm_message_manager=>GC_LIFE_VISIBILITY_AUTOMATIC
*            IV_PARAMETER_1    =
       IO_ELEMENT        = lo_el_sflight_selection
       IV_ATTRIBUTE_NAME = 'CARRID'.
Where the mr_message_manager is a reference to of IF_FPM_MESSAGE_MANAGER.
Hope it can help you.
Best Regards

Error messages in webdynpro

Hi,
I'm currently working on developing an ESS scenario for IT0573 Australia (Absences). For this scenario I've not used the FPM completely. The roadmap is as follows:
Overview -> Detail -> Review and Save -> Confirmation.
The node Detail has a sub-roadmap as follows :
Detail -> Popup1 -> Popup2.
The FPM is not used for navigation from the nodes in the sub-roadmap to Detail or Review screens.
For certain conditions, error messages have been raised from webdynpro in the Detail screen. However when I use the previous button to go to the Overview screen, the messages are still persistent.
Is there a way I can counter this issue?
Regards,
Shwetha Sekhar.

Hi Chaitanya,
The clearing of the error messages is normally handled by the FPM. Since we have not used the FPM completely, the error messages tend to be persistent. Nevertheless, error messages generated from the front end are cleared. Only the ones generated from the backend are not being cleared. Is there any way to clear these messages? If yes, then where are they stored?
Even if we write the code to clear these error messages in PREVIOUS BUTTON's action, it will be like re-coding the entire FPM for our scenario. Is there any other way to do it?
Regards,
Shwetha.

Getting error message after creating project ess~org from ESS track

Hi All,
Our basis team just now implemented the track for ESS and MSS.So we need to sync all application from DTR.
We are facing problem with one Dc essOrg.I have created project essOrg from ESS track in inactive DC of development configuration.Build of DC is successful,where as in the Task tab its showing below error message:
" Tree TreeCont [dataSource]: Context element and property are not compatible Orgchart.wdview NWI_HR1_Dessorg~sap.com/src/packages/com/sap/xss/hr/org/chart "
I have done the follwing steps :
1.I have close the project.Then remove it from client.Then close the NWDs and reopen it.Still the same error we are getting after creatig project from the track.
2.Even we tried to repair the DC.Its asking for check out.Then after creating activity its showing an error pop up message "org.eclipse.jdt.core.JavaModelException: Classpath contains duplicate entry: D:Documents and settings/susmita.panigrahi/.dtc/2/DCs/sap.com/pcui_gp/xssfpm/_comp/gen/default/public/FloorplanManager/lib/java/sap.compcui_gpxssfpm~FloorplanManager.jar "
3.I have open the OrgChart view of VcOrgChart Component in NWDs.I have found that the data source property of Tree node is showing red cross mark with name OrgTab(name of context node).I have tried to select another node also other than the context node OrgTab , getting message "Select an attribute of Type"
Can any body tell me how to solve the error"Context element and property are not compatible " coming for DC ess~Org?
Thanks
Susmita

If you have created other projects and they are working fine? Standard application should work without any modifications, so you may like to revert all the changes(before they cause further problem).
Well you may like to clean up your directory , unless you have loads of application checked out.. Remove all applications from this particular Track, ensure that everytime you delete project from Studio , select to remove code from directory.
This is likely that you are working on applications from two tracks, where version of FPM component is not the same. I always prefer to work one at a time, and i remove other track if i am done with application(This is lame way of handling it, but i prefer this.. saves loads of time to clean/repair)
Also hope you are using compatible version of Studio.
Rgds

HCM Form - Error Message

Hi,
I am looking for a sample code to throw an General Error Message while processing an HCM Form in the MSS Portal . I have written all the code in the Enhancement part.Please give some examples.
Thanks,
Vind

I would be helpful to know what component you had enhanced...
As your question was quite brief I will try to be with an answer
Given that HCMP&F is FPM based - try looking at FPM_GAF_SFLIGHT_DEMO and the method of the controller - CHECK_FLIGHT_DATA. Here a message is reported if various fields are not populated.
Chris

Navigation to another view after error message appears

Hi,
I have a requirement to enhance a the FPM component FITE_VC_RECEIPTS Receipts for Expense Report , to display the messages according to the expense type. These messages are for itemization. If an error message appears, i need to click on
enter itemization and enter to that view,itemize that particular expense type and then the error message should disappear after itemization is done.
But presently if error message appears i am unable to navigate to the itemization view as the navigation_abort is set 'X' and also the rv_response = 'CANCEL' in FITV_FPM.
Please suggest as how to enhance the component so as to recify the error messages and navigate to the itemization view.

It is bit complicated to advice without seeing your source and understanding the problem.
In webdynpro i would have done something like this
enhance in the process_event method and return ev_result - defer. (failed status is equivalent to you cancel and navigation_abort ).
You can try to enhance like this and try out changing the values for navigation_abort and rv_response.

Raising Error message

Hi all,
We are using SAP ABAP Web Dynpro Component: RPLM_QIMT_NOTIF_COMP to create notification(IW21). After entering data to create notification screen and press save, we want to do some validations and trough error message to screen and stop saving notifications until errors are fixed. Could someone give us clue how we raise error messages. Rather sample code to raise error messages. Notification is created via portal.
Rgds,
Harish

Hello Harish,
When the user presses on the save button, an event would be triggered. You can catch this event and perform your validations. Once the validations are done, you can use the FPM message manager to report your error messages. (IF_FPM_MESSAGE_MANAGER). You can instantiate this API in your component and then use the methods from this API to report your messages on the UI.
Regards
Rohan

Messages in FPM

Hi,
I am enhancing std wd component which is using FPM .
My Req is : I have to put a field by name HOURS on a view and check the no the of hours to be less than 12 .
If the no.of hours exceeds 12, I have to raise error message .
I have raised error message in WDDOBEFOREACTION and its working also.
Now the question is : When ever I raise error message , the ramaining mothods of std component are executed and the data is saved as per standard code. Here what I want is, whenever the message is raised,the std component process should be stooped and then whenever the user enters less than 12 hours,then the data should be saved.
Plz let me know how to stop the process of saving whever error msg is raised?
Thanks,
Ganga

Hi,
As the application is FPM driven component, I think you need to handle the validation of the UIBB and the message raising in the process_event of the FPM.
PROCESS_EVENT Implementation of your UIBB.
IF io_event->mv_event_is_validating = abap_true.
Do local checks and report messages if needed
ENDIF
CASE io_event->mv_event_id.
WHEN XYZ
Handle event and fill EV_RETURN accordingly with a value from IF_FPM_CONSTANTS~GC_EVENT_RESULT
ENDCASE.
Thanks,
Shailaja Ainala.

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Messages in FPM

Similar Messages

Maybe you are looking for