Error Messages on Initial Launch 3.1.4 on Mac

I tried to follow the "Mac Installation Notes" as closely as I could.
- Download the file above
O.K.
- Extract the zip file into any folder, using folder names
How? When you double-click on a .tar file, MacOS feeds it to the Archive Utility, which extracts it into the same location. In my case, I had dragged it from the Downloads file onto the Desktop before double-clicking. The result was a file named "OracleDataModeler.app" which can be launched directly. However, it does have internal structure, which can be accessed by a right-click followed by selecting "Show Package Contents" from the pop-up menu.
- Within that folder, expand the datamodeler folder and execute datamodeler.sh
I was able to do this with Terminal, resulting in the following sequence. Please notice the error messages. OS is Lion (10.7.5).
At this point, the program is launched, but it won't operate correctly. In particular, any attempt to save a design results in about two dozen error messages of the form, "Can not write document to file: <filename>".
Thanks in advance for any ideas on how to get this working on a Mac running Lion.
Mark
Edited by: Mark on Nov 4, 2012 9:34 PM
Edited by: Mark on Nov 6, 2012 8:18 PM

Looks like it's also mandatory to set the directories in Tools .. Preferences .. Data Modeler before doing any file manipulation. That is, the defaults (blank) are unworkable, and no clue is given as to either best practices for setting them, or at the minimum the constraints on what they might be for the product to work. The lack of basic setup documentation makes the out-of-box experience (OBE) for this product on the Mac very poor.
Mark

Similar Messages

Suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. Appleworks MW_MSL_PPC SHLB Interfacelib "

suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. <Appleworks><MW_MSL_PPC>SHLB><Interfacelib><>"

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help...
Open Console in Utilities & see if there are any clues or repeating messages when trying to open AW6.

I am on a mac system 10.6.8. I get an "unknown error" message when I launch Illustrator 5.5

I am on a mac system 10.6.8. I get an "unknown error" message when I launch Illustrator 5.5

Yes, it worked recently!
But I have just solved the problem... I threw out the preferences & restarted. Thanks!

Error message (-41110) when launching Itunes

rene.haller
Feb 24, 2013 4:30 AM
I have just downloaded the latest version of Itunes (or rather the latest update). And now I get an error message when i lauch Itunes: -(41110).
However, it does not prevent me from actually using Itunes. It's just an error box that appears when Itunes is launched. Any idea?
Windows 7
I have this question too (11)
Reply
Categories: Installing, Removing and Upgrading
Re: Error message (-41110) when launching ItunesFeb 24, 2013 4:10 PM (in response to rene.haller)
Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s: iTunes: Advanced iTunes Store troubleshootin
I have the question above, bwecause of this annoying problem and the aswear they cave does not solve my problem, the answer is not clear in what to do.....

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

check compatibility first, http://roaringapps.com/apps:table

I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!

I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!

Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Java Error Message: "Unable to Launch the Application"

Hello all and thanks in advance for any help.
When I try to launch the program, "E*Trade Pro", I receive an error message saying "Unable to Launch Application". This is new as of today. I have run the program on numerous occasions in the past with no problems.
On that error screen, if I click details this is what I get:
Error: The User cache does not exist and cannot be created. Check that the configuration is valid, and that you have permissionto write to the configured cache location.
JNLPException[category: System Configuration : Exception: null : Launch Desc: null
at com.sun.javaws.Main.continueInSecureThread(Main.java:233)
at com.sun.javaws.Main$1.run(Main.java:108)
at java.lang.Thread.run(Thread.java:637)
I am using a MacBook. This program opens through Safari. I recently had to delete my "login" keychain and this problem arose thereafter. Thanks again for any help.

Welcome to the Sun forums.
jjandry03 wrote:
..When I try to launch the program, "E*Trade Pro", I receive an error message saying "Unable to Launch Application". ...I think your best off contacting the providers of "E*Trade Pro". The error sounds as though it is in their launch file.

I get this error message before it launches

There are visible errors in the code but when I run the project I get this error.
Erros in Project
Errors exist in required project: tickets.
Continue launch?
I then ran Debug and found this
<terminated>Ticket_sales[Java Application]
<terminated, exit value:0>C:\Program FIles\EasyEclipse Desktop Java 1.2.1\tre\bin\javaw.exe(Apr 19, 2007 8:40:47am)
What does that mean and how do I fix it.
Thanks
sandyr

I'm pretty sure you're using Eclipse (since that's
the Eclipse's error message).
That means there are syntax errors in one of the Java
file (under the "tickets" project).
So, open up the tickets project, and at least one
Java file should have a red mark on it.
Fix it.
(Don't bother trying to click Run->Run, or
Run->Debug.... since your files don't even compile!!!)might not be a code error. a missing dependency would give that message, too

Error Message on AE Launch

I'm using a brand new Adobe Master Collection, not an upgrade. I keep getting this error: After Effects error: invalid DICT array size ( 83 :: 2 ) at the launch of
AE. I tried troubleshooting removing fonts, using Font Finagler (SP?), uninstalling/reinstall etc., advice that I got on another Adobe Help Forum, all to no avail. I read somewhere else that the software machines servers/software engineers or wizards (for all I know), might think I'm running a trial version, which I AM NOT and this is why I'm getting an error message. That forum also said help desk in India was not very helpful. As I HATE HATE HATE talking to customer service reps, I felt this was my last option. After nearly 13 years of using Adobe products, I've NEVER had problems EVER troubleshooting fixes. This sucks.
I'm running Mac, Snow Leopard 10.6.6, MacBook Pro (Intel Core). Help would be greatly appreciated.

See this thread:
http://forums.adobe.com/thread/793842

Iam getting error message when i launch Opera web browser

Hi All,
I have installed Opera web Browser on solaris 9 without any error message. When i try to start Opera web browser it says following message
ld.so.1: ./bin/opera: fatal: libqt-mt.so.3: open failed: No such file or directory
Killed
How to solve this problem? Any idea
Thanks in Advance
Jai

hello..
i had same above problem..then i install SFWqt as you tool. and that early error dissappered. now new error reappered.
I use ultrasparc systtem..and solaris 9...I install opera 9.21(shared). Now i tried to run..i was start...else it shows these errors
root@sunrise # ./opera
opera: $HOME set to /root. Use -personaldir if you do not want to use /root/.opera/
opera: X Shared memory extension is not available. ZPixmap not supported
ld.so.1: /usr/local/lib/opera/9.21-20070510.2/opera: fatal: relocation error: file /usr/local/lib/opera/9.21-20070510.2/opera: symbol setInputMethodEnabled__7QWidgetb: referenced symbol not found
Killed
Help me to start opera
Best Regards,
Ashish

Error message to the launch of a SPARQL query well trained in Java

Hello, I am not if it is a compatibility problem between JENA ARQ and got the message that I sometimes not consistently (at least I can not reproduce !!!) so it is very difficult to correct at least to understand and find a solution? (Anyone have a suggestion or solution)
Error message:
--- exec-maven-plugin:1.2.1:exec (default-cli) @ MIDA ---
Oct 13, 2014 21:01:21 PM ca.ireq.oracle12c.connect.OracleThin <init>
INFO: Connection try ... : jdbc:oracle:thin:@liost:1521:LIOST with user *****
Exception in thread "main" java.lang.NoSuchMethodError: com.hp.hpl.jena.sparql.algebra.optimize.TransformJoinStrategy: method <init>()V not found
at oracle.spatial.rdf.client.jena.OptimizeSem.rewrite(OptimizeSem.java:124)
at oracle.spatial.rdf.client.jena.OptimizeSem.optimize(OptimizeSem.java:91)
at oracle.spatial.rdf.client.jena.QueryEngineSem.modifyOp(QueryEngineSem.java:195)
at com.hp.hpl.jena.sparql.engine.QueryEngineBase.createPlan(QueryEngineBase.java:104)
at com.hp.hpl.jena.sparql.engine.QueryEngineBase.getPlan(QueryEngineBase.java:97)
at oracle.spatial.rdf.client.jena.QueryEngineSem$1.create(QueryEngineSem.java:211)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.getPlan(QueryExecutionBase.java:426)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.startQueryIterator(QueryExecutionBase.java:400)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.execResultSet(QueryExecutionBase.java:408)
at com.hp.hpl.jena.sparql.engine.QueryExecutionBase.execSelect(QueryExecutionBase.java:135)
at date.app.AppendLabel.query(AppendLabel.java:76)
at date.app.AppendLabel.main(AppendLabel.java:50)
BUILD FAILURE
Total time: 32.564s
Finished at: Fri Oct 13 21:01:45 EDT 2014
Final Memory: 5M/123M
big thank you in advance.

Allo I use Maven to execute my Project java :
        <dependency>
            <groupId>com.hp.hpl.jena</groupId>
            <artifactId>jena</artifactId>
            <version>2.6.4</version>
        </dependency>
        <dependency>
            <groupId>com.oracle</groupId>
            <artifactId>ojdbc7</artifactId>
            <version>12.1.0.1</version>
        </dependency>
        <dependency>
            <groupId>com.hp.hpl.jena</groupId>
            <artifactId>arq</artifactId>
            <version>2.8.8</version>
        </dependency>
I find no maven repository with Oracle Jena 2.7.2 and with under dependency?

Error message when initiating scanning

I got an error message when trying to scan today (don't know why as scanning has been fine until now) which upon using HP's diagnostics gave me the response below. My problem is that the link to the solution no longer works. How and where can I find the download it says I need to install?

Hello @BobR44,
Welcome to the HP Forums!
I understand a message appears stating the driver is missing when trying to scan a document. I will do my best to assist you! First, I need to find out some questions to figure out this issue:
What is your operating system on your computer? Windows or Mac?
How is this printer connected? Wireless or USB?
Please verify this information and I will assist you further. Have a great day!
I worked on behalf of HP.

I keep getting an error message when trying to update applications on my Mac.

For a few weeks now, whenever I get the pop up message that there's an update available for something and I click through to go update, it asks me to log in and then gives me this error message:
I click Okay and nothing happens.
I am sure I'm signing in with my current Apple ID. However, I wonder if the problem relates to the issues I had after I got my first iPhone in November. When I first got it, the tech set it up with the Apple ID I had created for my daughter to use for her iPod a few years ago. Since I used my own email address and I don't want her apps, I created a new one and reset my iPhone. That was all before this error message started popping up.
Can anyone help me fix this? I want to be able to update my computer applications.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Update iPad2 from 4.3.5 to iOS 7 error message 4000 or 11 (using iTunes 11.3, MAC OS X 10.7.5)

I want to update my iPad2 from 4.3.5 to iOS 7. But after approx. 30 min. I get error message 4000 or sometimes 11. I have updated iTunes to 11.3, MAC OS X 10.7.5 and disabled the firewall. I have also tried the tiny umbrella method, but tiny umbrella won't start. What else can I do?
I am a bit disappointed that this is so difficult.
I would appreciate your help! Thank you!

Re: Error 11
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Check for outdated or modified software
Related errors: 1015, “The required resource can't be found.”
You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.
Is your iPad jailbroken?
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

I am receiving an error message when trying to open any application in the Office for mac suite
Any suggestions??

Hello
you can try - remove and re-install microsoft office
you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
you can try use font book too detect font conflict / problem
you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
HTH
Pierre

Error Messages on Initial Launch 3.1.4 on Mac

Similar Messages

Maybe you are looking for