Error messages on startup "C:\windows\system32\cmd.exe

I have a new HP Envoy Desktop (2 days old); on each Restart, 2 boxes show up on the screen; 1 empty Large black box Titled "C:\windows\system32\cmd.exe;  and a smaller window titled " C:\Program Files (x86)\user extensions\client.exe; which says " Windows cannot find 'C:\Program Files (86)\user extensions\client.exe'. Make sure you typed the name correctly, and try again. These 2 boxes re-occur on every Restart of this computer?

Hi
The igfxtray.exe seems to belongs to Intel driver and this file is a part of quick access software to the control panel via a System Tray icon for graphics based upon the Intel.
Usually you should see a small Intel display icon in the task bar in the right lower corner.
The igfxtray.exe controls this.
So you can also disable this in msconfig.
In search type msconfig. Then choose StarUp tab and choose remove the mark from the entry containing the igfxtray.exe
Now save the changes and reboot the unit
That should disable this popup.

Similar Messages

  • When I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe

    when I open Firefox I have to try several times because a Runtime Error with the program C:\Windows\System32\regsvr32.exe

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "Continue in Safe Mode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • How to remove annoying POPUPS ON STARTUP C:\Windows\System32\igfxtray.exe

    Hi -
    After I on intel.com tried to upgrade my graphic driver Mobile Intel(R) 965 Express Chipset Family my screen at startup shows a popup-box with the text:
    C:\Windows\System32\igfxtray.exe
    I am asked to "Run" or "Cancel" but no matter what I choose the exact same popup is shown on startup again and I have to Click 3 times on Cancel to get the box disappear - It doesnt seem to influence on my use of the laptop but its a little annoying that its shows up.
    On windows.com help forum I have followed some suggestions without help except the suggestion on open Regedit because many have told med not to mess around in the Regedit
    I have with no succes asked this question on a forum within intel.com
    Has anyone a suggestion what to do?
    Thanks in Advance
    DonOlesen

    Hi
    The igfxtray.exe seems to belongs to Intel driver and this file is a part of quick access software to the control panel via a System Tray icon for graphics based upon the Intel.
    Usually you should see a small Intel display icon in the task bar in the right lower corner.
    The igfxtray.exe controls this.
    So you can also disable this in msconfig.
    In search type msconfig. Then choose StarUp tab and choose remove the mark from the entry containing the igfxtray.exe
    Now save the changes and reboot the unit
    That should disable this popup.

  • My Desktop went blank and an error message appeared saying C:\Windows\system32\config\systemprofile\Desktop refers to a location...

    This the whole error message: C:\Windows\system32\config\systemprofile\Desktop refers to a location that
    is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information
    might h ave been moved to a different location
    I restarted the pc and  through the safe mode i copied the Desktop file that was missing at C:\Windows\system32\config\systemprofile\
    from C:\Users\User. I restarted but i still get the blank desktop.
    Can you guys help me out?

    Thnx a lot LomM! My younger brother run the check disk and now it's working. But now im facing a different problem. With the sound drivers. I have not sound at all. And at Device manager I see  yellow marked devices, giving me the code error 52 ("Windows
    cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)").
    So, I unistalled and re-installed but nothing. Still yellow marked. I did the Recovery thing (a couple of times using different dates ) but it did not complete successfully.  
    So I disable driver verification, while i was restarting my computer and now im getting the code 39("Windows cannot load the device driver for this hardware.
    The driver may be corrupted or missing. (Code 39)").
    it's that C:\Windows\System32\drivers\ktshunk.sys which is not getting verified. Any ideas? 

  • Error message on startup Satellite C655-S5068

    Error C++runtime library C:\windows\system32 spoolsv.exe.  also an error stating that NET. Framework 2.0 is missing but when you download it from microsoft it says that its already installed .  Tried downloading Net. 4 to no avail.  Have also reloaded Lexmark printer driver(disc and over the internet (Lexmark site) more than once to no avail(Lexmark 5600-6600 series) Help

    Satellite C655-S5068 
    Error C++runtime library C:\windows\system32 spoolsv.exe. 
    also an error stating that NET. Framework 2.0 is missing
    It does look like that spoolsv.exe file is corrupt.
    I would first try a System Restore to before the problems occurred.
       What is System Restore?
    Whether or not that fixes things, you should burn a repair disc if you haven't yet.
       Create a system repair disc
    If necessary, use it to boot to the Windows Recovery Environment and run Startup Repair.
       How to Use a System Repair Disc to Restore Windows 7
    Let us know how it goes.
    -Jerry

  • Windows To Go windows/system32/Winload.exe corrupt or missing

    I have a windows to go hard drive and an error came up recently saying "windows/system32/winload.exe corrupt or missing". I made a recovery drive from normal windows 8 but it cant detect the windows to go hard drive (I think its because its only
    looking to internal hard drives). any help would be appreciated. thanks
    EDIT:: it should say winload in the title

    Hi!
    My name is Long.
    I've got the same issue like you and resolved that without repartition and reinstall window to to. 
    I will so you step by step what i did to resolve the error with winload.exe corrupt or missing. I hove that will help you resolve your problem too.
    As you known: Window to go run in a external harddrive with 2 partitions. The first Partition have 350 MB (FAT32, active partition and it contain boot files). The second partition have remaining space (contain window files).
    The first you need a computer have a working window 7 or 8 OS(recommend window 8 or highter)
    Plug your window to go hard drive to the window.
    Assign the first partition 350 MB by disk manager with letter Z: (normally the fist partition 350 MB is not mounted)
    Assign the second (contain windows files) with letter O:
    Delete all file in the partition Z:
    Open CMD and do the command.
           O:\windows\system32\bcdboot O:\windows /f ALL /s Z:
    Restart and boot to window to go.
    If you want to know why i did that, read below:
    (External Hard Drive = EHD)
    i found a lot of the suggests in the internet and did that.
    - I had try to replace the winload.exe file in the second partition but it not effect.
    - I replace the registry data in folder \windows\system32\config but it not effect.
    - I did some commands found in the internet but not effect too. (https://social.technet.microsoft.com/Forums/windows/en-US/1b2045b9-7fef-47f0-aea3-1e185fb7544c/fix-winloadexe-is-missing-or-corrupt-no-its-not)
    - System repair not work with EHD.
    After i did all the ways found in the internet, i think that, the problem is not due to winload.exe file.
    I read the tips to install window togo again and i try to reinstall the window to go without repartition.
    The install have 2 steps: 
    - 1: Partition and set active.
    - 2: Copy file and make boot
    I ignor the first step because my EHD have got 2 partitons like the tips. 
    I delete all file and folder relate to window except my pertional data (in the 2nd partition).
    I extract install.wim file and copy all to the 2nd partition. I restart and boot to EHD but it still got error.
    I'm used Bootice and check the MBR of EHD and i got unknown MBR. I think the the problem.
    So I used Bootice software, set MBR of EHD = Windows NT 6.x. and I
    Set PBR to 2 partitions are BOOTMGR boot record (FAT32/NTFS/ExFAT).  I restart and boot to EHD but it still got error.
    Next, I delete all file in 1st partition of EHD.
    I Open CMD and do the command 
    "o:\windows\system32\bcdboot o:\windows /f ALL /s z:"
    after that, i restart and boot to EHD and it worked. The window to go work perfect but i lost all settings :)
    So i think the 2nd partition and all files is ok. The problem is by the 1st partition.

  • HT5634 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup

    I have a 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup.  Any way to fix it?

    Windows 8 is not supported on your computer.
    http://support.apple.com/kb/HT5634

  • Windows 32 cmd exe. on startup

    On start up, I get a window that says C: Windows 32 Command exe. that flashes just for a second. I've checked other forums, and they said to go to my start up menu in the Task Manager and uncheck it if it's there. I found it in the Google Chrome folder and unchecked Google Chrome. Didn't do anything. 
    Every forum I've seen so far just talks about Windows XP or Windows 7. I'm on 8.1.
    I've run a virus scan with Avast and didn't find anything, I've also run System Mechanic. Also nothing. All my updates are up to date as far as I can tell.
    It's not terribly annoying, but it just started up out of the blue and if I can get rid of it, I'd like to.
    Any ideas?
    Thanks in advance.

    Hello @Boo_Radley,
    I have read your post on how a Windows 32 cmd.exe prompt appears when you first boot up your desktop computer, and I would be happy to assist you in this matter!
    Does this window appear if you boot your computer into Safe Mode? Is this a recent or a reoccurring issue? What does the full error message state as it appears on the screen?
    In the meantime, I recommend following any missed steps in this document on Resolving and Preventing Viruses on Your Computer (Windows 8). This should help catch and prevent any additional malware threats contributing to the error message when Windows is loaded.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • C:\Windows\system32\ntvdm.exe Error

    I keep getting this message when I start iTunes and when I go to sync my iTouch
    C:\Windows\system32\ntvdm.exe Error. iTunes seems to be working properly. But is annoying

    I googled "C:\Windows\system32\ntvdm.exe" and it seems you either have some malware on your PC, or you can try setting your processor affinity as suggested in this link.

  • Resolving "Reg Svr32" Error message on startup

    I keep getting the following Error Message on startup:
    "RegSvr32"
    The Module C:\ProgramData\qayspiig.dat failed to load.
    Help

    Hello @Sam-l,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you keep getting a RegSvr32 error on startup on your computer and want to get it fixed. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

    I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

    Uninstall and run the Cleaner Tool
    Uninstall Creative Suite 4 and point products (Mac OS X)
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I get error messages frequently when changing windows or starting firefox

    this is the fourth time i'm trying to contact you guys. i keep getting error messages when i changed windows saying oops this is embarassing... etc. try again button works sometimes, sometimes not, if not have to restart, erases my bookmark menu tabs which i LOVE, and sometimes they come back. i love you guys so much more than internet explorer, but i have had to use internet explorer now almost all the time because of this problem. also, if you could make it so that one can delete blocks of unwanted email (like click the first unwanted email and the last one and then control/shift like in the old days) that would be AWESOME, but i have found that i can't do this in other applications anymore either so maybe it's something windows operating systems took out as they make new versions, but if you guys could create it in your email site wow, everyone would LOVE YOU!!!!!! so many do already, all my IT guys use you and my friends who are halfway computer literate. i hope you can help me with my problem, also i think i read you partner with clients for their websites to improve/add features. is that true? i'd love to do that if so, i'm using go daddy now, and haven't done half the stuff i want to do on my site. thank you for your positivity and you guys make up for those nasty virus makers who wreck people's lives, businesses,.. using their brilliance to harm people, it so sad. thank you again. i hope this goes through this time. i think i'm going to copy and paste it this time on Word so I can mail it to you if i screw up again!
    thank you again so much!
    Deborah Wong, MD
    == This happened ==
    A few times a week
    == 5-8 weeks ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • How do I correct error messages MSVCR80.dll and windows error 7 126?

    After installing the latest itunes update, I received two error messages:  MSVCR80.dii and windows error 7 126?  I cannot access itunes at all and am eager ti fux these errors.  If Apple itunes is at fault I sure wish they would fix the problem.  At least I'll save money if I can't access itunes! 

    Hey koicaretaker!
    Here is an article that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Keep getting error message 1114 on my windows and uninstalled 7 reinstalled itunes

    Trying to sync my new iphone 5 to my itunes and it has asked me to uninstall & re install which i have but still keep gettting an error message 1114 on my windows laptop and cant log my new phone on so cannot use it Help

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor.  How do I fix these?

    When I turn on my computer I get the following error messages:
    Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
    Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
    How do I fix these?

    Library/LaunchAgents: com.promethean.activmgr.plist
    Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
    Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
    HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
    These are the system extension errors
    "/System/Library/Extensions/AppleGraphicsControl.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
    "/System/Library/Extensions/BJUSBLoad.kext"
    "/System/Library/Extensions/EPSONUSBPrintClass.kext"
    I do not know what any of these do or how to fix them.  I have run multiple disk permission repairs & disk repairs.  The startup & system extension errors continue to come up.
    I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

Maybe you are looking for