Error messages on Web Dynpro ABAP

Hi all!!
I have created a Web Dynpro ABAP which consumes 2 Web Services from XI through Proxy classes.
When a method of a Proxy class from a WS gives an exception, an error screen is automatically displayed, How could I handle this exception and personalize the error message??
Thanks and regards,
Manuel Míguez.

Hi,
here's the documentation on <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/05a5421935c511e10000000a1550b0/frameset.htm">error pages</a>
For information on messages, see
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d8/2a934259a5cb6ae10000000a155106/frameset.htm">here</a>
Regards, Heidi

Similar Messages

How to display an error Message in Web Dynpro

Hello,
I want to display an error message in Web Dynpro. I'm using this,
IWDMessageManager message = wdComponentAPI.getMessageManager();
message.reportSuccess("<some relevant debug message>");
However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
Thanks
Regards
SU

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

Error configuring the Web Dynpro ABAP

Hi,
I am configuring the web dynpro ABAP which is giving an error that is mentioned below when i try to logon to the system.
I have followed the note 1088717 for activating the services for Web Dynpro ABAP in SICF .
i have even followed the note 434918 for configuring the fully qualified host names for BSP.
Please let me know what might be the error.
Error when processing your request
What has happened?
The URL http://cgslsvr3:8020/sap/bc/webdynpro was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: Application // Does Not Exist
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: BASIS -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080401 -t: 144740 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
than you have to add in the hostfile at c/windows/system32/drivers/etc
your mapping with the ip address of the server, add a line like:
XXX.XXX.XXX.XXX servername
but it seems the server is found, so really check in sicf:
/default_host/sap/bc/webdynpro/namespace/application_name
this should be active as well
grtz,
Koen

Adobe Reader error with SAP interactive form in Web dynpro ABAP

Hi,
We are having a strange intermittent problem with Adobe Reader. When we try to open PDF files from SAP Frontend we get an error pop-up. The pop-up does not have any text. The title of the pop-up has "Adobe Reader". There is a blue question mark and an OK button. The form is inserted into Web Dynpro ABAP page. This web dynpro application is executed in SAP GUI by this program:
REPORT TEST1 MESSAGE-ID SWDP_RUNTIME.
start-of-selection.
CALL FUNCTION 'WDY_EXECUTE_IN_PLACE'
    EXPORTING
     PROTOCOL               = 'HTTPS'       " HTTP | HTTPS
    INTERNALMODE           = 'X'    "SPACE - browser is started
    PARAMETERS             =
      APPLICATION            = 'Z_FORM'
     CONTAINER_NAME         = 'TEST'
    EXCEPTIONS
      INVALID_APPLICATION    = 1
      BROWSER_NOT_STARTED    = 2
      OTHERS                 = 3.
IF sy-subrc EQ 1.
    MESSAGE a400.
ELSEIF sy-subrc = 2.
    MESSAGE a401.
ELSEIF sy-subrc = 3.
    MESSAGE a667.
ENDIF.
Adobe Reader version is 9.1.2
Is there any solution for this?
Many thanks for answer.

Jiri,
The reason why I thought downgrading would help is because Reader 9 and above is probably not fully supported by SAP yet.
You can maybe open an OSS and see if Adobe 9 is fully supported or not.
Chintan

Time out error on front end ( 60 seconds) developed in web dynpro ABAP

Hi all
I am getting TIME OUT error ( ERROR :- Connection to partner break in 60 seconds) on front end (on web) because in SAP backend there is a function module excuting and taking 3 minutes. But on front end developed in web dynpro ABAP time out is coming in 60 seconds.
Please help me how can i increase this TIME OUT time on front end more than 60 seconds.
Please help as soon as possible

Hi,
see the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/7b/72092aaa1342c5a3af7ce0b9a11ff9/frameset.htm">Documentation</a> and
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/78/9852b7c06b11d4ad310000e83539c3/frameset.htm">this</a>
Regards, Heidi

Error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap

Hello Experts
The error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap occurs after manager’s following actions:
selected detailed Team View ;
selected hierarchy;
changed style of the hierarchy to any other (for example, the vertical);
the error occurs after attempting to do any action.
Our system is EHP7.
If someone faced with this error, please give me advice how can i resolve this problem.

Hi John,
Sorry for the delay in replying. No, we do not have the same problem if we understand you correctly.
"We have bypassed the MSS Home Page and just embedded the Detailed Team View as a standalone application in our MSS portal role" - we also made for the our customer. BUT we have error «The entered value is not on the list of valid values» in our standard system.
Regards,
Andrey

Web Dynpro ABAP application - Fully Qualified Domain Names (FQDN) error

I have created a Web Dynpro ABAP application. On executing it, I get Fully Qualified Domain Names (FQDN) error. I have host name of my server.
I do not know domain name of my server. How can I detect it?
I want to know in Windows XP and Windows 7.
Please help me asap.

Hi,
On your server run command ipconfig /all
FQDN = Hostname + Primary DNS Suffix
The make sure the profile parameters SAPLOCALHOSTFULL and icm/host_name_full reflect the same.
Regards,
Srikishan

Error in integrating flex with web dynpro abap

Hi,
I did integrating Island Component into Web Dynpro ABAP as per the tutorial given by Thomas Jung.
Now i'm facing a problem that in that bar chart ,after giving the values in web dynpro table,bars are not getting populated.
I'm getting X and Y axis populated...only bars are not getting populated..
plz help....

hi,
i'm using flex 4...
Is it because of that??

Web Dynpro ABAP Stylesheet - Portal Integration

We have a Web Dynpro ABAP being displayed through a Portal iView. The Portal server and the Web Dynpro ABAP server are separate. Our problem is in getting the Web Dynpro ABAP to use the stylesheet of the Portal.
We can make this work by forcing an external stylesheet (via application parameters, global Dynpro settings, or passed on the end of the URL), but we have to hard-code the full URI of the Portal stylesheet. This would be very hard to manage if we hard-code every iView's CSS location (or set every individual Web Dynpro's application parameters), and we want instead for the Portal to supply whatever the user's stylesheet is dynamically.
So what we want is: if we change the Portal stylesheet, the Portal would just pass the new stylesheet URI to our ABAP Web Dynpro iViews without manual modification of the iViews.
Here is an example of what works:
http://our-abap-server.com/sap/bc/webdynpro/sap/cprojects?sap-ep-themeroot=https://our-portal-server.com/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/ourportalstylesheetname
Shouldn't the Portal iView automatically pass sap-cssurl or sap-ep-themeroot to Web Dynpro ABAP? We have "Supply Portal Stylesheet" checked on the iView it just doesn't pass anything to the Web Dynpro ABAP. Why wouldn't SAP pass this parameter dynamically to the Web Dynpro ABAPs? Is this a product error?
There seems to be a great deal of confusion about this on the SDN message forums... I think this may be the core issue.
We are using a 7.0 SP13 Portal with an ECC 6.0 SP12 backend.

Now that you mention it, I ran into that exact same issue -- the application parameters didn't work for hard-coding the theme. The fix ended up being the web server semicolon thing I mentioned earlier (that was why the parameter didn't make it to the backend).
The themeroot is automatically sent to the backend from the portal, so you shouldn't really have to manually send it as a parameter anyways.
I'd suggest talking to your network guys. Also this could be the result of the SP you are on (we're on 13 for the portal and the backend system -- maybe this feature doesn't work in some earlier SP's?). There are also some options to force the theme as a WD application parameter on the backend side, which you could check into. Details on those are here:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/fb57412df8091de10000000a155106/frameset.htm]
Also you could look at the requests being made by installing HttpAnalyzer in your browser. You can inspect "post" parameters going from the portal to the backend system. One of those posts (the first one to the backend system) should contain the parameter sap-cssurl (same kind of thing as sp-ep-themeroot). This is where our problem turned up as this parameter was not being posted.
Lastly, make sure that your frontend portal and backend portal are in the same domain. For instance:
frontend.domain.com
backend.domain.com
If your backend and frontend are in different domains it messes all kinds of things up, including stylesheets I think. If you can't get around this, then read about domain relaxing (but I highly recommend getting the domains the same).
When we started, ours were:
portal.dx.company.com
sap.company.com
This created all kinds of problems. Putting our systems in the same domain with the same protocol and fixing our little semicolon web server problem fixed basically all of our portal complaints. Up until that time, we had also had many problems with session management (backend sessions were getting stuck until the HTTP timeout).
That's all I know. Good luck.

Problems creating new Web Dynpro ABAP application

All,
I am following this tutorial to create my first Web Dynpro ABAP application
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fc/501b42b5815133e10000000a155106/frameset.htm
In this tutorial I was asked to create a component as Local object.
But after giving the name of the component, I get an alert saying
"Object can only be created in SAP Package"
When I confirm this, I was shown a "Create Object Directory entry" dialog box which asks for attributes like Package.
And this box has Local Object button, when clicked I get the message "Test Objects cannot be created in foreign namespaces".
I found some other article through Google
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
According to this, I tried to give $TMP as Package. But still have the same error
"Test Objects cannot be created in foreign namespaces"
Where am I and what should I do to create a new project?
Thanks.

Thanks Abinav.
My problem is with naming convention only. Component name starting with Z solved my problem.

Smart forms in web dynpro abap

how to use smart forms in web dynpro abap ????
what are the steps??

Hi Ankit,
1.create a node(Eg:PDF) with attribute(SOURCE type xstring )
2.use Interactiveform UI element in the view
3.Bind the pdfSource property of the UI to the attribute SOURCE
4.in method write logic for call the smart form
Pass the output of the smartform function call to
function module CONVERT_OTF to convert it to PDF data.
method displaypdf .
data : l_x(1) value 'X'.
data: lv_text type char3,
lv_syucomm type char1,
ls_pdf type xstring,
lv_fm_name type rs38l_fnam,
lv_control_parameters type ssfctrlop,
lv_output_options type ssfcompop,
lv_ssf_output type ssfcrescl,
lt_otfdata type table of itcoo.
data:
node_input1 type ref to if_wd_context_node,
elem_input1 type ref to
if_wd_context_element,
stru_input1 type
ig_componentcontroller=>element_zinput.
* navigate from <CONTEXT> to <INPUT1> via lead selection
node_input1 = wd_context->get_child_node( name
ig_componentcontroller=>wdctx_zinput ).
* get element via lead selection
elem_input1 = node_input1->get_element( ).
* get all declared attributes
elem_input1->get_static_attributes(
importing
static_attributes = stru_input1 ).
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM_NAME'
importing
fm_name = lv_fm_name
exceptions
no_form = 1
no_function_module = 2
others = 3
if sy-subrc <> 0.
* Error MESSAGE
endif.
* Set relevant control parameters
lv_control_parameters-getotf = l_x. "OTF output
lv_control_parameters-no_dialog = l_x. "No print dialog
lv_control_parameters-preview = space. "No preview
* Set relevant output options
lv_output_options-tdnewid = l_x. "Print parameters,
lv_output_options-tddelete = space. "Print parameters,
call function lv_fm_name
exporting
* ARCHIVE_INDEX * ARCHIVE_INDEX_TAB *
ARCHIVE_PARAMETERS control_parameters = lv_control_parameters
* MAIL_APPL_OBJ * MAIL_RECIPIENT * MAIL_SENDER
output_options = lv_output_options
user_settings = space
pernr = stru_input1-zpernr
reinr = stru_input1-zreinr
pdvrs = stru_input1-zpdvrs
importing
* DOCUMENT_OUTPUT_INFO job_output_info = lv_ssf_output
* JOB_OUTPUT_OPTIONS exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
refresh lt_otfdata.
lt_otfdata[] = lv_ssf_output-otfdata[].
call function 'SSFCOMP_PDF_PREVIEW'
exporting
i_otf = lt_otfdata
exceptions
convert_otf_to_pdf_error = 1
cntl_error = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
data: l_dummy type standard table of tline,
pdf_data type xstring,
pdf_size type i.
clear: pdf_data, pdf_size.
* convert otf to pdf
call function 'CONVERT_OTF'
exporting
format = 'PDF'
importing
bin_filesize = pdf_size
bin_file = pdf_data
tables
otf = lt_otfdata[]
lines = l_dummy
exceptions
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
data:
node_pdf type ref to if_wd_context_node,
elem_pdf type ref to
if_wd_context_element,
stru_pdf type
if_componentcontroller=>element_pdf ,
item_source like stru_pdf-source.
* navigate from <CONTEXT> to <PDF> via lead selection
node_pdf = wd_context->get_child_node( name if_componentcontroller=>wdctx_pdf ).
* get element via lead selection
elem_pdf = node_pdf->get_element( ).
* set single attribute
elem_pdf->set_attribute(
exporting
name = `SOURCE`
value = pdf_data ).
endmethod.
Thanks
Chinnaiya P

No switch to HTTPS occurred in Web Dynpro ABAP application

We are building a Web Dynpro ABAP application and when I logon I get:
No switch to HTTPS occurred, so it is not secure to send a password
I want to suppress this message but I can only find a parameter that works for BSP applications (You can suppress the message using the property BspDontShowHttpsWarning. Goto SICF and locate your service, open node and choose tab error pages. At redirect URL add '&bspdontshowhttpswarning=X').
However, for Web dynpro this parameter does not work. Does somebody know if there is a parameter available for web dynpro ABAP applications to suppress this message?
kind regards
Angelique Heutinck

Angeline
I asume that you are using a "Basic Authentication" method, if this is your case, you should configure the SICF service with the following parametters:
1) Go to SICF, /yourservice / double click
2) On the "Logon Data" tab, in the "Procedure" option choose "Alternative Logon Procedure".
3) On the same tab, at the "Logon procedure option", delete the SSO option, and change the Number of the another methods, raised the "Basic Authentication" to the first place.
4) Go to Error pages tab, flag "System logon", and after that click over Configuration, here check "Do no display warnings"
Hope this help you !

Configuration Web Dynpro ABAP

Hello,
I am new in Web Dynpro ABAP. I want to use Web dynpro :
- first I activate service by transaction SICF
But in the web dynpro explorer (SE80), when I click on the button 'Layout', a following message is displayed 'the page canno't be displayed'.
I don't know how to setup server ? I don't find informations for that ?
Can you help me ?
Thanks

the error is coming because you didn't add the fully qualified domain in the host file.
in the run , enter Drivers
Drivers->etc->hosts
edit the hosts file , add the entry to it. find the ipaddress from your sap logon pad , and domain from the url
execute any standard application you can find the domain name.
10.1.134.59 xxxxxxx.yyyyyy.com

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Error messages on Web Dynpro ABAP

Similar Messages

Maybe you are looking for