Error Messages - Please help with the following
What do the following mean and how do I remedy the problem? I keep getting the following error message that prohibits me from being able to use Adobe Reader XI. AcroMissingCompWClass:AcroRd32.exe. Application Error followed by - The exception unknown software exception (0x40000015) occurred in the application at location 0x00d339b7.
What is your operating system? Reader version?
Similar Messages
-
I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?
Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha -
When I try to reformat there is an error message about configurations with the pointing device
When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
Hi can you help with the following panic attack report,
hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report: 1
Anonymous UUID: 7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.driver.AppleUSBCDC 4.1.15
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.3
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 513.20.19
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
M1319F Scan error message " cannot communicate with the scanner"
I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail
I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail
-
I Need help with the following error:
Hi, I am getting the following error:
<b>BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</b>
I have looked at some of the other threads that deal with this but since I am new to XI I am not sure where to look. I have tried to activate in SXI_CACHE and I get a code of 99 with the following error. I did not get this error in the QAS environment, only when it was moved to Prod. We have cleared and reset all of the caches and am still getting this error when I try to activate in SXI_CACHE:
<b>E 'STATUSCODE' is not a component of data object 'PAYLOAD'</b>
Can someone point me in the right direction to fix this? We just moved it to prod and need to get it fixed asap.
Thanks in advance for all of the help.
Mike CurtisHi Michael,
Before SP16:
the problem should be solved with the help of note 890760. You might find note
816430 interesting as well, but the first one should help you solve the problem.
After:
If those are already in your system, have a look at note 996631. This could be
the solution.
Regards and good luck with XI.
Jaime -
Certificate Related Error Message/Please Help
Today I received an "Unable to verify SSL server pop.gmail.com" message on my Mail server. I transfer mail from gmail to Mail.
"Mail was unable to verify the identity of this server, which has a certificate issued to "pop.gmail.com". The error was:
The certificate for this server has expired.
You might be connecting to a computer that is pretending to be "pop.gmail.com", and putting your confidential information at risk. Would you like to continue anyway?"
In the lower box, it lists the Version, Serial Number, Issuer Name (which is from Zaire, Western Cape, and lists the organization as Thawte Consulting cc and other info, Subject name is Google Inc, common name is pop.gmail.com, then gives a Signature Algorithm, Parameters, etc.
It won't let me Copy and Paste so I have not hit the Continue button for concern of losing that info for reference.
I went to Help which instructed me to do the following:
I'm getting a certificate-related error message
If you get an error message with the word "certificate" in it, make a copy of the message and contact your Internet service provider (ISP) or network administrator. The error message may help them diagnose your problem.
If your mail server uses a self-signed Secure Sockets Layer (SSL) certificate, each time you open Mail you'll see an error message stating that the certificate is not valid. You can continue, but you'll see the same message every time you open Mail. To stop seeing this message, you can permanently accept the certificate.
To permanently accept a self-signed SSL certificate:
Click the Show Certificate button in the error message.
The certificate appears with a certificate icon in the upper-left corner.
Hold down the Option key and drag the certificate icon to the desktop.
Double-click the certificate icon on the desktop, and choose X.509 Anchors from the pop-up menu. Click Add.
The certificate is permanently accepted.
You must have permission to administer the computer for this procedure to work.
For information about encryption, click "Tell me more."
Instead of asking for the "580 Anchors" , it asked simply "Do you want to add the certificates from pop.gmail.com.cer to a keychain?"
I clicked "Add"
The pop.gmail.com certificate AND Thawte Freemail Member AND Thawte Personal Freemail certificates is now entered in my Keychain.
There are no dates listed under "Created" or "Modified" for those certs under Keychain.
IS THIS OK OR DO I HAVE A PROBLEM SINCE THESE THAWTE CERTS ARE LOCATED IN ZAIRE???
IF IT IS A PROBLEM, HOW DO I FIX/CHANGE/OK/DELETE/MODIFY, ETC. IT? PLEASE BE CLEAR.
CAN I/SHOULD I JUST DELETE ALL THREE/SOME OF THE CERTS NOW IN KEYCHAIN?
WILL I STILL BE ABLE TO GET MAIL AS BEFORE THIS MESSAGE IF DELETE THE CERTS?
I believe this is the first time I have received a message concerning certificates so I am naive concerning this.
THANK YOU.I had similar gmail/cert problem yesterday - not for the first time!
I deleted the prefs (user/library/preferences), deleted the gmail account (mail prefernces), ran applejack ( http://applejack.sourceforge.net/ ) & added the account from scratch.
Annoying I know, and my inbox was 200+ emails but nobody seems to know what or why this happens (my previous post) http://discussions.apple.com/thread.jspa?threadID=243186&tstart=0
Perhaps this is related to certain emails (an email scam), i run 3 macs & the mail account on the affected machine receives my business email & this is the only machine the gmail/cert problem occurs. -
Cannot update to iTunes 8.2 - get error message, please help???
I have Windows Vista. When I try to update to iTunes 8.2 (which I need for the new iPhone 3Gs I bought yesterday), I get this error message:
"Errors Occurred while installing the updates. If the problem persists, choose 'Tools > Download Only' and try installing manually"
I've read a lot of the posts and tried 'repairing' the Apple Software Updater, and that doesn't work.
Can someone point me in the right direction?? Any help would be greatly appreciated!I am in the same boat.
I originally had the same error. So I tried the following unsuccessfully:
- Download Only, several times and on 2 different computers, one with XP and one with Vista o/s
- Downloading from the Apple site, several times over the last 3-4 days and each time it gets to a different % downloaded and then stops and after a while returns an error.
- I've tried uninstalling iTunes and Quicktime
- I've tried clear the cache, delete all cookies etc.
I upgraded my phone using a friends computer and now I can't connect to iTunes at all as it is not compatible (and the computer I uninstalled it from I can't download it to reinstall.
Not sure what else to try. A friend warned me that iTunes was problematic and frustrating to use, but I bought an iPhone anyway and now understand what they mean! -
RMan Error message Please Help
Hi
I have been trying to register a database in RMAN . Here are the steps I took on OS linux Mandrake 8.1 using ORACLE version 9.2.0.1.0
SQL:
CONNECT sys/password@ora AS SYSDBA
CREATE TABLESPACE "RMAN"
DATAFILE 'C:\ORACLE\ORADATA\W2K1\RMAN01.DBF' SIZE 6208K REUSE
AUTOEXTEND ON NEXT 64K MAXSIZE 32767M
EXTENT MANAGEMENT LOCAL
SEGMENT SPACE MANAGEMENT AUTO;
CREATE USER rman IDENTIFIED BY rman
TEMPORARY TABLESPACE temp
DEFAULT TABLESPACE rman
QUOTA UNLIMITED ON rman;
GRANT connect, resource, recovery_catalog_owner TO rman;
rman catalog=rman/rman@ora
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to recovery catalog database
recovery catalog is not installed
RMAN> create catalog tablespace "RMAN";
recovery catalog created
RMAN> exit
Recovery Manager complete.
rman catalog=rman/rman@ora target=sys/password@w2k2
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: ora (DBID=1371963417)
connected to recovery catalog database
RMAN> register database;
This is returning the error message
RMAN-00571:
RMAN-00569:
RMAN-00571:
RMAN-03002:failure of register command at 07/16/03 12:56
RMAN-03014:implicit resyncof recovery catalog failed
RMAN-03009:failure of full resync command on default channel at 07/16/03
ORA01001- cursor not valideHi,
First of all I would not use RMAN as a tablespace name. It may be confusing oracle and besides it maybe a reserved term not available for use and a cause for some of those errors listed.
But here is what is in my notes that work.
After the database is created named RCAT you must create the user RMAN. It is then after he is created the program will run.
Create user RMAN
SQL> CREATE TABLESPACE CATTBS
'D/ORACLE/ORADATA/RECAT' SIZE 5M
AUTOEXTEND ON;
CREATE USER RMAN IDENTIFIED BY RMANTEMPORARY TABLESPACE TEMP
DEFAULT TABLESPACE CATTBS
QUOTA UNLIMITED ON CATTBS;
After the user has been created you need to grant some permissions for him to use.
GRANT RECOVERY_CATALOG_OWNER TO RMAN;
COMMIT;
GRANT CONNECT,RESOURCE TO RMAN;Now you need to create the RECOVERY CATALOG
Go to the host operating system oracle/ora81/bin/RMAN.EXE and execute this script the following prompt shows up.
RMAN>
You now need to create the CATALOG in tablespace CATTBS.
RMAN>CREATE CATALOG TABLESPACE CATTBS;
responds with
RMAN>RECOVERY CATALOG CREATED
Now you need to run these two scripts CATALOG.SQL AND CATPROC.SQL
RMAN>@D:\ORACLE\ORA81\RDBMS\ADMIN\CATALOG.SQL
\CATPROC.SQL
Running these two scripts now allows you to view the recovery catalog views.
This completes the setup of the recovery catalog database.
Now connect to your target
RMAN> connect target internal/oracle@ora
RMAN> connect RCVCAT rman/rman@rcat
Give the command to register database:
RMAN>register database
it responds with
RMAN>database registered in recovery catalog
You need to connect to the RCAT database with the following command:
RMAN>CONNECT CATALOG RMAN/RMAN@RCAT;
Hope this format helps.
Al -
Error messages please help !!!!
Hi.
It is driving me mad. It is not possible neither to install NW_JAVA_700SP14_SR3 nor
NW_JAVA_700SP09. Always the same error ?
Please help what is wrong, I get these error messages:
ERROR 2008-07-11 13:53:02.750
CJS-30051 Cannot insert a key value pair in the secure store files. SOLUTION: See output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
ERROR 2008-07-11 13:53:02.796
FCO-00011 The step insertAdminDataInSecStore with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .ever been faced with the same problem ?
Why deleting ? It that only one way to fix this problem ?
What are the others doing in such cases. Or am I the only one person
where has this special problem on the world. Becides I dont believe
in solving the problem through removing mentioned directory and
reinstalling. Nevertheless I will try it. I let you know about the result.
bye
sas -
Can anyone help with the following error message?
While installing itunes update 7.5 received message Error 1905 module c:\programfiles\itunes\itunesminiplaayer.Dl failed to unregister HRESULT-2147220472
I noticed no one replied to your questions but was wondering what you found out. I had an ipod shuffle and just replaced it with a 3rd gen ipod nano. The new nano who not show up on my itunes so I went in to update it to the new version and received the same exact error message you did. Were you able to figure out a solution?
Any help you can give would be greatful. -
Need your help with the following 3 error messages that now appear on my PDF document.
Hi all,
I have been working on a PDF document for university for the last 4 months. Its a PDF document which I have been filling in as I go along and saving without any problems.
Today however I try to open it for work and this is what I get in succession...
"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document"
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
"The font 'GTAJBY +Bliss-Regular' contains a bad /BBbox."
This has never done this before and even when I tried to open my backup file it did the same.
Can someone please help me? I have so much work thats potentially lost on this....
(Also, I am not much of a computer head, so please keep it in layman's terms)
Thanks in advance everyone...I am having same problem with a 2011 year tax PDF fill in form I JUST got from IRS website.
The actual form is the 2011 8829.
I am running Windows 7 64 bit, Adobe Reader X version 10.1.4.
After trying to open the doc (nothing displays) I go to properties, and it says ...
Title: 2011 Form 8829
Author: SE:W:CAR:MP
Created: 12/23/2008
PDF Producer: Adobe LiveCycle DSesigner ES 8.2.
PDF Version: 1.7 (Acrobat 8.x)
Tagged PDF: No
Fast Web View: No
Yikes ... was hospitalized last year ... now I have 9 days to file. -
Need help with the following error message...
I just got a Shuffle for Christmas and was trying to download iTunes when I got the following message. FYI - I have a PC and the operating system is Windows XP:
iTunesSetup[1].exe is not a valid Win32 application
Anyone received this message before? I've looked around the troubleshooting section but am at a loss as to what to do from here...
ThxI do have SR but hoping i can get quicker answer hereYou may always escalate the SR if you are not getting response timely. Anyways, give the reference of this thread in the SR and ask service engineer to file a bug.
I will email you the wire messageI saw the wire message you mailed across. There are some junk characters in the starting of the payload and that's why parsing is failing. Most probably it is a BOM (Byte Order Mark). Ask your TP to send messages in UTF-8 encoding without BOM or any other junk character in the starting of the message. You may open the wire message payload you mailed across in notepad or textpad and you will able to see those junk characters in the starting of the payload.
Regards,
Anuj
Maybe you are looking for
-
I really need new apps but I can't because of this problem!
-
Suddenly, my laptop does not turn on. When I press the power button the charging led blinks three times and nothing happens afterward. Trying to power on with out the battery nothing happens. Please guide me.
-
To visualize the report created using Discoverer Plus in Web
Hi, I had created the report usingOracleBI Discoverer Plus Version 10.1.2.45.46c & able to visualize the report in OracleBI Discoverer Viewer Version 10.1.2.45.46c. URL fo accessing the report is as: http://machinename1:7777/discoverer/viewer If i tr
-
My new ipod touch - how actually it syncs contacts and calend events?
hello, I have finally my ipod touch. I really like it, not perfect of course but then if it would be , would be boring isnt it ? It syncs well with my outlook contacts but i dont know.. does it overwrite my outlook with info on my touch? or it overwr
-
Is anyone else having trouble after thy downloaded Mountain lion x with iMessages mine isnt linking to my computer because it keeps saying i have a registration error. Has anyone else had this problem or know how to fix it