Error messages using software

I am using "Mavis Beacon Typing Tutor" and get this error message when attempting to type on screen:
Assertion ((mdwLesson_starttime != mTIMEUNKNOWN)) failed in "Clsbase.cpp", line 1009
Am I missing an update or is this a question for the software manufacturer?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Similar Messages

HT201210 Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?

Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

Error message hkey_local_machine\software\classes\itunes.aifc keeps appearing when updating.

Error message hkey_local_machine\software\classes\itunes.aifc keeps appearing when updating. Then update uninstalls. I was trying to fix a missing driver error.

Press WinLogoKey+R to open the Run... dialog box
Type in Regedit and press enter/return
Tap the plus symbol next to HKEY_LOCAL_MACHINE
Tap the plus symbol next to SOFTWARE
Press C on the keyboard, then again or scroll down until Classes is selected
Tap the plus symbol or use the right-arrow key to open the branch
Press i on the keyboard, then use the Page Down key, scroll bar or arrow keys to locate iTunes.aifc
The registry editor should now look something like this: (Click to enlarge)
Right-click on the iTunes.aifc key and click Permissions... to see what is going on. My current permissions for the iTunes.aifc key are shown below: Giving Administrators and/or yourself Full Control should be enough to let the installer make changes. Alternatively you could delete the key and let the iTunes installer recreate it.
tt2

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

download from adobe.com or prodesigntools.com.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Getting Error Message using Formatted Search

Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.

Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni

How do you resolve the computer error message "ipod software update server could not be contacted"

I am trying to restore my ipod touch but when I go to restore I get the error message "ipod software update server could not be contacted" What do i do?

Try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
Please Help!!!!!

That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

How to show error message using java.awt?

How to show error message using java.awt?
Which is the class corresponding to the JOptionPane?
Or I need to use Frame ?

No, JOptionPane is swing!
You would have to create your own frame, put your message in it, then show it.

Error message - Reload Software: 552

How do I fix the Curve 8900 with the following error message:
Reload Software: 552
My phone is stuck with this message every time it is on. It does not go anywhere, not even the home page, just a white background screen and this little message in the middle. I have to take off the battery to make it go away.
Please advise. Thanks !!

Error 552:
http://www.blackberry.com/btsc/KB18751
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

JavaScript Error Message using Angel Learning Software

After upgrading to the latest version of FF I receive a JavaScript error message when attempting to send an email via the Angel Learning educational portal. All the other operations in Angel appear to function normally at this time. Does anyone have any ideas as to what may be the issue and it if will be resolved or can be bypassed?
Thanks!

Thank you. The JavaScript is enabled on my FF settings. The message I am receiving is:
Script: http://angel.cascadia.edu/jscript/yahoo/utilities/utilities.js:9
So, perhaps I confused jscript with JavaScript by error? Either way, the link you forwarded said not to confuse the two...
"Please note that JavaScript is not Java and Jscript is not JavaScript!"
So, I clicked on the link to JScript which says that it is the same language as JavaScript and has a different name due to trademark issues. I have IE on my computer but never use it. Would you recommend that I uninstall IE? Please let me know if you have any other suggestions.
Thanks!

Error messages using software

Similar Messages

Maybe you are looking for