Error Messages when Checking Database via dbacockpit

Hi,
I got the below messages when I tried to exe a "Check Database" job. What could be wrong ? Please advise. TIA !
SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN returned rc_cannot_get_rfc_dests
Message no. BT351
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 901
Message no. BT351
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: x_error
Message no. Q2233
Diagnosis
This message includes variables. No additional information can be specified.
Job cancelled after system exception ERROR_MESSAGE
Message no. 00564
DL

Hai,
Are you trying to execute the job in a remote server, if yes check the RFC connection which it uses to connect.
Provide the SAP Gateway details for that RFC connection and then try.
Regards,
Yoganand.V

Similar Messages

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

Script Error message when checking for updates....

Post Author: rcoleman
CA Forum: General Feedback
Getting a Script Error message when checking for updates or logging in to Crystal Reports. CR Developer v XI 11.0.0.1994.
Script Error
Line 481
Position 41
If g3()=True then main=True: Exit Fun
FYI to the Site Administrator

parkerpress wrote:
Any idea how to solve this if I haven't activated the 3GS service? I've been doing fine on wireless only.
Steve
Same problem here. After upgrading to iOS 4.2.1 a couple of weeks ago I'm getting the same error as the OP in the first post. I've never activated the 3G service.
I tried turning the cellular service on and checking for updates, pulled and replaced the SIM card, rebooted, nothing helps. I'm still getting the error when I click on the "Check for Update" button in iTunes (v10.1) when my iPad 64GB 3G is connected to my iMac. Any help would be appreciated. TIA.

Mail 2.1 and password error message when checking for incoming mail

I get a "password rejection" error message when Mail 2.1 tries to check for incoming messages and there are no messages to retrieve (I have an Earthlink account). I don't have any problems sending messages. When I send a test message to myself, Mail can retrieve it. When I check mail a few minutes later, I get the "password rejection" message from Earthlink. This also happens when I use MS Entourage (v10.1.6). I have been using Entourage for years and just recently started using Mail and this password problems seemed to appear recently (last few weeks).
Has anyone else experienced a similar problem? Since this happens in both Mail and Entourage, I don't know if it is Mac OS 10.4.10 or Earthlink. I tried Earthlink tech support and they were not much help.
Thanks,
Kenny

Problem resolved by itself. I think it was a problem with my ISP.

Error message when running script via package

Hi there,
I have a problem I can't understand - I am running a script from a package, and I get this error message:
CopyCatFinanceError
Invalid dimension ALL_FCSTPRICING in Lookup rule
where CopyCatFinance is the name of the package, and ALL_FCSTPRICING is the name of a parent in the Category dimension.
I don't understand why this member is being flagged as a DIMENSION, when it is only a member. And I don't understand why this is being flagged at all - this dimension has been reprocessed, as has the application (in fact, all the applications), the script has been re-validated and a full Optimise has been run several times...
I am now out of ideas! Any thoughts?
We are running BPC for MS 7.0 sp 7, on SQL 2005.
Thanks a lot,
Jason
PS. And there are no lookups in this script either - I'm referencing the category dimension with the %CATEGORY_SET% variable as the user selects this at runtime.

Can you post your logic, also check your lgx files are making sense.

Error message when checking mail

When checking my yahoo on the phone, i get this: _*imap.apple.mail.yahoo.com incorrect_* It just started out of nowhere. I took my original phone back to the apple store saturday and this started monday night. It worked fine until then. I tried to reenter my password and it still doesn't act right. I get a similar message with my gmail account but it says pop instead of imap.
Anybody have any ideas??
thanks, Kelly

Kelly,
You may want to try deleting those accounts off your iPhone and re-adding them again. To remove the accounts, go into Settings > Mail > tap on each account and tap on 'Delete Account' at the bottom. Then add those accounts back to the iPhone.
Hope this helps,
Jennifer B.

I get an error message when checking the response arrow icon: What do I do?

When I respond to a message, it sits in my sent folder. If I wanted to see my response, I could check my inbox on the original email and click on the response arrow icon. Now I get a message "error - Mail was unable to find your response to the message "subject of message" You may have deleted the message.
I know I did not delete it so I am not sure what is happening. It worked before.
Any help or advice would be greatly appreciated.
Skip

Although one would think that re-creating the index could fix this problem, that’s not the case. What sometimes works is restarting the computer or doing some cache-cleaning — don’t ask me why, and I don’t know how to fix the problem when that doesn’t work either.
You may also want to take a look at the following thread, where another user reported the problem in his/her case was related to a difference in how the email address was written:
Error - "... unable to find your response..."

Error message when checking Aggregates on Info-set based Query

Hi All,
I have an Info-set (Inner-join between Info-cube and DSO) based Query. When I checking whethere it is picking up the aggregates (which is created on Info-cube) or not in RSRT, it is giving me following message -
I>> Row: 23 Inc: SHOW_AGGR_COMPARISON Prog: CL_RSDDK_AGGREGATE_COLLECTION
RS_EXCEPTION
301CL_RSDDK_AGGREGATE_COLLECTION
SHOW_AGGR_COMPARISON
I have checked fully that whatever fields I am using in my Query are available in Info-cube's Aggregate.
Even when I am running same query (which I have created on same Info-cube direclty) in RSRT, it is picking up the aggregates.
I have put the Request status 'Rolled up data (Rollup)' in Info-cube in Info-set as well.
Please guide me what I need to do for picking up the aggregates.
Regards,
Dheeraj Kumar Garg

No it is possible as per SAP.
Please read follwoing help-
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
It is talking abou the Special Features of InfoCubes in InfoSets.
For queries based on an InfoSet with an InfoCube, the system decides at runtime whether aggregates can be used for the InfoCube. This is the case if all the required InfoObjects of the InfoCube exist in an aggregate. The following InfoObjects are required:
The key figures of the InfoCube selected in the query
The characteristics of the InfoCube selected in the query
The characteristics required for a join with other InfoProviders in the InfoSet.
Furthermore, as a prerequisite for using aggregates, all the data required by an InfoCube must be readable using logical access. For an InfoCube within an InfoSet with InfoCubes, it is no longer possible to read part of the data from one aggregate and part of the data from another aggregate or the InfoCube itself.

Error message when checking WWI report template document in CG42.

Hi Gurus.
I'm facing troubles to check MSDS report template document after upgrading the version 4.7 to ECC 6.0. When I try to Check the template I receive many msgs warnings like shown below:
For Example One type of template warninfg from report document:
Template Texts: (From the UNDERLINED LINE i am getting the warnings)
<01G1023001RP(C;1)>:<01G1023001RP(P;1)>:
<13BNG034(+0101G1023001RP(C;2-),01G1023001RP(P;2-)>
<11BRG023(D;2-*)>
<01G1023001RP(C;2-)>:<01G1023001RP(P;2-)>:
<11ERG023>
WARNINGS from above template symbols:
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
*Similar type of other warnings:*
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM1: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM2: Range to be overwritten by that of discrete repeating group
Symbol ZSUPSTR: Range to be overwritten by that of discrete repeating group
Symbol ZSUPCTY: Range to be overwritten by that of discrete repeating group
I realy don't know what is going on. Before in SAP 4.7 version When i check the template document i didnt receive any warnings like i listed above but i am receiving now. For your reference I am using the same WWI report template in ECC 6.0 also.
Can anyone help me?
Thanks in advance.
Edited by: sunil29 on Aug 1, 2011 3:26 PM

See note 920317. That warning won't affect the result based on this example. You are using (2-*) on both the Discrete repeating group and the symbol itself. In your new system, the area you use discrete repeating group overrides the area on the symbol. The note gives some examples.

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Got error message when store XML documents into XML DB repository, via WebD

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
I got error message when store XML documents into XML DB repository, via WebDAV.
I have successfully registered 5 related schemas and generated 1 table.
I have inserted 40 .xml files into this auto generated table.
using these data I created relational view successfully.
but since I couldn't store XML documents into XML DB repository, via WebDAV
when I query using below code:
SELECT rv.res.getClobVal()
FROM resource_view rv
WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
I got nothing.
My ftp code is listed below:
ftp> open localhost 2100
Connected to I0025B368E2F9.
220- C0025B368E2F9
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
User (I0025B368E2F9:(none)): fda_xml
331 pass required for FDA_XML
Password:
230 FDA_XML logged in
ftp> cd /home/DEV/message
250 CWD Command successful
ftp> pwd
257 "/home/DEV/message" is current directory.
ftp> ls -la
200 PORT Command successful
150 ASCII Data Connection
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
226 ASCII Transfer Complete
ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
250 SET_CHARSET Command Successful
ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
200 PORT Command successful
150 ASCII Data Connection
550- Error Response
ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
550 End Error Response
ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
I have tried all suggestion from another thread such as:
alter system set events ='31150 trace name context forever, level 0x4000'
SQL> alter system set shared_servers = 1;
but failed.
is there anyone can help?
Thanks.
Edited by: Cow on Mar 29, 2011 12:58 AM

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
I got error message when store XML documents into XML DB repository, via WebDAV.
I have successfully registered 5 related schemas and generated 1 table.
I have inserted 40 .xml files into this auto generated table.
using these data I created relational view successfully.
but since I couldn't store XML documents into XML DB repository, via WebDAV
when I query using below code:
SELECT rv.res.getClobVal()
FROM resource_view rv
WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
I got nothing.
My ftp code is listed below:
ftp> open localhost 2100
Connected to I0025B368E2F9.
220- C0025B368E2F9
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
User (I0025B368E2F9:(none)): fda_xml
331 pass required for FDA_XML
Password:
230 FDA_XML logged in
ftp> cd /home/DEV/message
250 CWD Command successful
ftp> pwd
257 "/home/DEV/message" is current directory.
ftp> ls -la
200 PORT Command successful
150 ASCII Data Connection
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
226 ASCII Transfer Complete
ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
250 SET_CHARSET Command Successful
ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
200 PORT Command successful
150 ASCII Data Connection
550- Error Response
ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
550 End Error Response
ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
I have tried all suggestion from another thread such as:
alter system set events ='31150 trace name context forever, level 0x4000'
SQL> alter system set shared_servers = 1;
but failed.
is there anyone can help?
Thanks.
Edited by: Cow on Mar 29, 2011 12:58 AM

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue.... This thing is so annoying when trying to go somewhere i just want the error message to go away.

In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

Error Messages when Checking Database via dbacockpit

Similar Messages

Maybe you are looking for