Error messages when relocating or consolidating originals

Hi!
I decided yesterday to make my managed Aperture Library a Referenced Library for future purposes (using other software, etc.). So, I highlighted all of my images (142,000) and chose Relocate Originals. I chose a newly erased and reformatted Hitachi EHD as the location to move the images to. It was going very well up until 59,000 images had been relocated. Then I began to get error messages. One after the other. Two examples are below. I had to finally cancel the process which left me with 82,000 managed images. I tried relocating them in smaller batches but I'm getting the error messages on every one of them. I then decided this was too frustrating and tried to consolidate the originals back to my library and got the same error messages. So now I can't put the originals back. Very weird. I'm stuck with a half referenced, half managed library which is not at all what I wanted. I don't know what to do at this point. I had no problems with my Aperture Library before doing any of this. I had even exported all versions, and some originals last week to a different EHD with no issues. Could it be the EHD?
Btw, it seems the images that are getting the error messages are mostly iPhone or scanned photos. The few RAW files I relocated are okay, and a lot of jpegs from a point and shoot camera (Canon S95) are also okay I believe. I haven't looked at every single file that wouldn't relocate though. And I was relocating these by Project name/File name so that the Finder folder would closely mirror my Aperture Library Folder structure.
I hope someone might know what to do next.
TIA! Debbie

Thanks Impression! I did that already, but it wasn't the answer. Turns out my EHD was formatted wrong (by me). I resolved the situation eventually and at least I'm back to fully managed again. Phew!

Similar Messages

  • Error Message When Importing Bookmarks From A Network Share

    An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
    To replicate:
    The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
    If I copy bookmarks.html local to the kubuntu machine, it imports without error.
    On windows, I can import bookmarks.html from the network share without error.
    Does anyone know why I can't import across the network on the kubuntu version?
    browser being run on windows 7:
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
    browser being run on kubuntu 10.04:
    Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

    It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
    error message/window titled: remote files not accepted. The message states: You can only select local files.
    So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

  • Error message when launching PowerPivot Window using Excel 2010

    I have installed the latest version of Powerpivot on several of our workstations.  Some of them are running the application just fine and some of them are getting an intermittent error message when trying to launch the PowerPivot Window.
    We are running Windows 7 ENT 32bit with Office 2010 32bit
    The error message given is : An operation that uses the database driver could not be completed.   If the driver is a Microsoft driver, make sure the drvier file isn't damaged, and if it is, reinstall the driver by re-installing Microsoft Query.  
    You can then try again and it will work.
    In fact the majority of the time this error message won't appear.
    The application has been removed and reinstalled.
    When I checked event viewer i'm finding this error which I think is related
    The description for Event ID 1 from source MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
    Hello,
    It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
    Microsoft® SQL Server® 2012 SP2 Feature Pack  =>
    ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Error message when starting MaxDB instance

    I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
    "-24994,ERR_RTE: Runtime environment error
    1,Cannot create ipc db directories for SID (OS error code 11000)"
    Max DB version : 7.7.02
    Does anyone have any specific pointers on where the issue could be.
    Any help is greatly appreciated.
    Regards,
    Murali Narayanan

    Hi gurus,
    I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
    I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
    My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
    Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
    MaxM

  • Error message when Closing PS CS6

    I keep receiving a error message when closing PS CS6 which says "Adobe Media Core CS6 has stopped working"
    What can I do to resolve this issue?
    I'm running Windows Vista professional

    If you want help you may have to provide some more information … and a Forum- or web-search might also be worth trying.
    http://forums.adobe.com/message/4509053
    http://forums.adobe.com/thread/1025148
    http://forums.adobe.com/message/4495683

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • Error Message when printing handouts

    First, I know this has already been discussed in these forums.  I tried the proposed solution in this thread http://forums.adobe.com/message/6273232#6273232 and it still didn't fly.  I'll go ahead and bust out a full explanation of the issue for those of you who may not want to navigate to the other thread:
    I'm getting the following error message when trying to publish my project as a handout:
    I'm launching Cap 7 in admin mode on a windows 8 machine and trying to publish to Word 2013.
    I'll select a publish location and start the publish, it gets to 10% and then stalls out (the error message doesn't appear at this time).  If I hit alt+tab, I'll see a "Save as" window.  I'll reselect the directory and name the file correctly and hit save.  That moves the progress bar to 100% and the error message appears.  I've tried to copy and paste the slides to a new project and the same thing occurs.  From what I've seen, others have had this problem but I've yet to see a confirmed fix.  If you've run into the issue and solved it, please let me know.  Is there a word plugin I need to install?  Is there a way to bamboozle my handouts from captivate to .pdf to word?  That would be cumbersome but I'm not scared to try it. 
    Thanks in advance,
    Eric

    Have you tried with system PLD?
    Thanks,
    Gordon

  • Error message when trying to open windows7 via vmwarefusion.

    error message when trying to open windows7 via vmwarefusion.;
    Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
    I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere?  I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp?   It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up.  I'm almost certain  it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
    I've uninstalled vmare completely and reinstalled, it, but the problem persists.
    Any help?

    You will probably get a better response asking this question in VMWare's forums for Fusion.
    Best of luck.

  • Error message when installing iTunes on my PC:  This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that  this is a valid Windows installer package

    Error message when trying to install iTunes on my Pc:
    Using Windows 7, had to replace hard drive.  HELP!!
    This installation package could not be
    opened. Verify that the package exists
    and that you can access it, or contact
    the application vendor to verify that
    this is a valid Windows installer package

    Hello JAH1961,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error Message when installing Itunes 7

    When I was trying to upgrade my Itunes to Itunes 7 , it downloaded all the way, but when it was preparing to install i got this message.
    The Windows Installer Service could not be accessed. This can occur if your running Windows in safe mode or if the Windows installer is not correctly installed. Contact your personnel for assistance.
    My computer wasn't running in safe mode and ive gotten this message many times when i have tried to redownload it so it must be an ongoing problem. What should i do?

    The Windows Installer Service could not be accessed. This can occur if your running Windows in safe mode or if the Windows installer is not correctly installed. Contact your personnel for assistance.
    with that one, the following document is a good place to start:
    "Error 1719: The Windows Installer service could not be accessed" error message when you try to add or remove a program

  • Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

    I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1.  Can someone help?

    This is NOT resolved.  The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing.  This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
    This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

  • Error message when installing iTunes on Windows 7, "Apple Application Support was not found, Error 2"

    I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

    I have a new hp-TouchSmart Envy 23. It has 2TB drive.
    I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS)  .
    I have used easy transfer many times and I am reasonably experienced user .
    I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
    I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
    I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
    I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW? 
    PLEASE do help. I would really appreciate very much .
    THANK YOU
    Adam 

    This thread may be useful. 
    Windows Easy Transfer will transfer from one drive to the other to mirror the original drive.  What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive.  If that is happening,t hen that error will be thrown.
    Try using the advanced options and view the report to see what exactly is happening and triggering the message.
    Let me know what happens. 
    The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Error message when starting Adobe Illustrator CC [Error loading plugins   AppBarControls.aip]

    Hello,
    I get the following error message when I start Adobe Illustrator CC.
    Error loading plugins
    AppBarControls.aip
    Then it gives me the option to continue by clicking okay. When it opens, the Application Bar is just blank.
    I've tried uninstalling, then ran Adobe CC Cleaner, then downloaded and reinstalled.
    Computer details : OS X 10.9.5, 1.3 GHz Intel Core i5, 8 GB 1600 MHz DDR3
    Help is kindly appreciated!

    I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch.  The support staff was great even though we had to work through several sessions.  Below is the email explaining our final session.
    This email is in regards with the issue you had been facing with Illustrator CC 2014.
    While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
    This was the main reason for Illustrator crash as several critical components had not been installed properly.
    We tried installing the program in a new user account & that worked.
    Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
    This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
    Avanish Divya was the final support person that successfully resolved my problems.

  • Error message when installing nvidia-173xx package

    I get an error message when I try to install nvidia-173xx driver:
    pacaur -S nvidia-173xx
    :: Package(s) nvidia-173xx not found in repositories, trying AUR...
    :: resolving dependencies...
    cat: /usr/lib/modules/extramodules-3.15-ARCH/version: No such file or directory
    :: no results found for linux
    :: no results found for linux-headers
    My kernel version: 3.16.1-1-ARCH
    What can I do to install it correctly?

    nvidia-173xx AUR page wrote:inux>=3.15.5
    linux<3.16
    linux-headers>=3.15.5 (make)
    linux-headers<3.16 (make)
    nvidia-173xx-utils
    Looks like you can choose from :
    -contact the maintainer to see if you can help with getting it to work with kernel 3.16
    - downgrade the kernel
    - switch to nouveau
    Note that there are comments on the aur page that state nvidia-173xx doesn't work with xorg 1.16, so you may have to downgrade more then just the kernel.

Maybe you are looking for