Error Messages when Transport Process Chain to Production

I am able to transport three related process chain to Q, but failed in Prodtion. Can anyone look at my error messages? Thank you!
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC
Version 'M' of chain USFCMD was saved without checking
Results of check for process     in chain  :
Results of check for process     in chain  :
Results of check for process TRIGGER START_USLDFORECT_MD in chain USFCMD:
Version 'M' of chain USLDFC was saved without checking
Results of check for process     in chain  :
Results of check for process     in chain  :
Results of check for process TRIGGER START_USLDFORECT in chain USLDFC:
Version 'M' of chain USLDFORECT was saved without checking
Results of check for process     in chain  :
Results of check for process     in chain  :
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
Results of check for process TRIGGER START_USLDFORECT_TD in chain USLDFORECT:

Try to transport the process chain by removing the process chain from schedule.
Go to Process chain select execution in menu..go for option "Remove from schedule"
It may help you.
Regards,
Srinivas.

Similar Messages

  • Error in remote call of destination - when transporting process chain

    Hi all,
    I have earlier not had troubles transporting process chains from development system to test. Now I get the following error
    Error in remote call of destination BW Test
    Message no. RSPC051
    Diagnosis
    The following error occurred during the remote function call for destination BW Test:
    Name or password is incorrect (repeat logon)
    System Response
    A short dump has probably been written in the other system.
    Procedure
    Look at the short-dump overview in the other system.
    I know we have a transaction (RSTPRFC) where we give the password for the user that will do the activation of the PC after transport, but checking with the basis guy, and according to him there has not been any changes to this user. (As the user is the same as the RFC user used when setting up source systems). Running a check on the source systems from RSA1 gives green on all, so then the user should be correct...
    (there is also no short dump available in the other system)
    Does anyone have a clue on what could be done to locate the error..?
    Thanks
    Regards,
    Øystein

    Hi,
    you are both right, and I got the issue corrected. In SM59 i have an ABAP connection that when checking it, gave me a logon error. When getting this connection working (by giving another password) and then setting the same password in RSTPRFC, the transport worked.
    I'm just not sure I understand why this became an issue.
    But anyway, thanks for the input.
    Regards,
    Øystein

  • Transporting Process Chains from Production DOWN to QA and Dev

    Hello,
    We have a ton of Process Chains in Production.  I am looking for the easiest and most efficient way to duplicate those in QA and DEV. 
    What steps do I take to Transport them DOWN to the other two environments?  Are there any pros or cons to doing this, or is it easier in the long run to just re-create them in those environments?  Like I said, we have a ton!  Any help would be greatly appreciated.
    Thanks in advance.

    Hi
    The best practice is to have every development done in Dev then transport to QA and then to P.
    If you are not following this process for PC you should.
    Also, every now and then QA should be refreshed (meaning, copy P to a new QA system and by doing so all the data and config (including PC) will be in the QA system).
    I would recomend to recreate the PC in DEV and transport them thru the landscape.  This way you have the correct process where every Development is starting on the DEV sys and moves to QA->P.
    Edan

  • Error Message when installing All In One Product

    I am having to re-install my HP Officejet 6500 e709a software.  I am getting the following error message when I try to install it.  Anyone have any suggestions on how I can correct this?
    Thanks,
    JN
    This question was solved.
    View Solution.

    Hi @MattNC79,
    Welcome back to the HP Support Forums! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to your Computer running the  Windows 8.1 Operating system. When you attempt to install you get an error message with an error code. I would like you to click on the link below to get started:
    HP Printers - Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) ...
    Please let me know the outcome, I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

    Hi Gurus,
    Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
    The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
    The process chain contains processes for:
    - starting the process chain
    - executing infopackage (for loading data to 0figl_o10),
    - ACR (activate data in 0figl_o10)
    - delete index 0figl_c10
    - DTP loading data from 0figl_o14 to 0figl_c10    
    - executing infopackage 80FIGL_O10
    - creating index in 0figl_c10
    - building DB statistics
    - rolling up aggregates in 0figl_c10
    - deleting of requests from the changelog 0figl_o10
    - deleting of requests from PSA (0fi_gl_10)
    How to find what cause that error.
    Regards,
    Leszek

    Hi,
    A SAP consultant told me to ignore that error. 
    Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
    The problem is described in sap note: 883745.
    Regards, Leszek  

  • Transporting Process Chain to Production

    Hi all,
    We have developed a query on cube 0PS_C04 in development which has been transported to Production.
    We also have a process chain in Dev, which loads data from 7 info packages (CO_OM_WBS 1, 2, 3, 5, 6 & CO_OM_NWA_1 & 2).
    we need to transport the Process chain into Prod now. The steps followed in BW-Dev are
    1. RSA1 -> Transport Connection -> SAP Transport -> Object Types -> Process Chain -> Select Objects
    2. Selected Process Chain
    3. Created new Transport Request
    4. Set Packages
    ... I am not able to see any elements (ELEM) in the list. None of the items are selected. I feel this is the issue...
    I have tgransported the query successfully and am able to generate the report without any data.
    My previous transport ended with errors (when I had selected all the packages.
    Please let me know whether I am going wrong somewhere or missed any steps.
    Warm regards,
    Vijay Badgeri

    Hi Dinesh,
    I have checked 4-5 infopackages in Dev as well as production. They are all available in Prodn. Only descrepancy noticed was the schedule of the upload was different in Dev & Prodn.
    Please advice whether I shd create fresh transport request for these infopackages and transport to production ?
    If so, what would be its effect on already transported InfoPackage groups and Process chains?
    eg. 0BUS_AREA_ATTR & 0BUS_AREA_TEXT were two such ips. They are part of IPG and are working without any errors till date.
    Hope, this step will not land me in some other troubles...
    Regards,
    Vijay

  • HP error message when trying to detect my product

    using HP pavilion Elite 150f desktop, when I click on HP website to find my products, I enter my product # but I get an error message saying Blocked or Not Trusted or "RETURN" code:"1624" I have never seen this before, I am trying to locate my care packs that I purchased in August 5th of this year and still not recognised, keep phoning HP techs but they tell me it has been taken care of yet they keep charging my credit card for the same care packs.
    Can anyone help with this error, I am entering the correct product # although it is not connected at my home here.

    Hi @emma22 ,
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Thanks for visiting the HP Support Forum
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Error ( termination error : 8) when scheduling Process chain.

    Hi Friends,
                    We are just configuring the BW system 3.5 ( Installing etc etc), I created a Process chain and trying to schedule it, I get the following Error.
    " Job terminated with error code : 8" , when I check the details of the message I see this " Cannot schedule the job with Id : BW REMOTE". Is it something that the basis/ securtity has to set up for the BW guys , to schedule jobs.
    Thanks,

    Hi Smily,
    The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
    You can see this for info on how to make the change:
    /message/685940#685940 [original link is broken]
    Hope this helps...

  • Error message when business completion of a production maintenance order

    Hello,
    When we try to do the business completion of an order, we get the following error message. We did all the steps that is mention in the error message long text, but still, we can't close this PM order... any suggestions how to resolve this issue ?
    Unprocessed future change recs for order 13101294 prevent del. flag/completion
    Message no. CO688
    Diagnosis
    There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 13101294. Possible confirmation processes are:
    Automatic goods receipt
    Backflushing
    Calculation of actual costs
    Data transfer to HR
    System Response
    You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
    Procedure
    You should process the open future change records using
    Predefined confimration process or
    The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
    Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
    Reprocessing incorrect goods movements
    Reprocessing incorrect actual cost calculations

    1) CORUPROC: done
    2) IW46:
    I have about 50 of thoses messages:
    Reprocessing incorrect confirmation:
    BAPI2010021219323230 Confirmations ordres de travail/service  BATCHADM     12.02.2010
    BAPI2010021619324630 Confirmations ordres de travail/service  BATCHADM     16.02.2010
    BAPI2010022519341330 Confirmations ordres de travail/service  BATCHADM     25.02.2010
    BAPI2010022619332130 Confirmations ordres de travail/service  BATCHADM     26.02.2010
    BAPI2010030119322730 Confirmations ordres de travail/service  BATCHADM     01.03.2010
    BAPI2010030419330430 Confirmations ordres de travail/service  BATCHADM     04.03.2010
    3) COFC
    I have many logs about availability control: ex: Item 001 Ordre 13101294 budget exceeded
    4) COGI
    No errors

  • Server name message when triggering process chain through ABAP PROGRAM

    Hi all,
    When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
    CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
         EXPORTING
           I_CHAIN      =  'XYZ'. ( Dummy Process chain name)
    While executing this program I am getting following message :
    You can specify the name of the application server here
    on which all jobs in the chain are scheduled
    If you do not specify a name, the jobs from batch
    management are divided between the available servers
    How to avoid this message.
    Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
    Your help is much appreciated.
    Thanks,
    Uday.

    Hi Shanthi,
    How to write exception handling for this.
    Quick reply is nedeed.
    Thanks,
    Uday.

  • Error occured when starting process chain

    When we want to start a process chain via SAP_BW_ProcessChainRun we get the following error log:
    Failed to start process chain /NSN/C_DSP_TR_GLOBAL_II. No logid was returned by the BW-SCH API.
    com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling RSPC_API_CHAIN_START: E RSPC 022 Processes with Error
    BAPI exception while calling RSPC_API_CHAIN_START: E RSPC 022 Processes with Error
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:789)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.handleRscpApiErrors(ClientConnectionImpl.java:808)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:505)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:296)
         at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:120)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:461)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:289)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
         at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
         at com.redwood.scheduler.connector.sap.rfc.command.impl.BwProcessChainCommand.execute(BwProcessChainCommand.java:98)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:86)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:56)
         at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:103)
         at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
         at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:74)
         at java.lang.Thread.run(Thread.java:579)
    What could be the reason?
    Thanks
    Br
    Günter

    O.K. I can answer the question by myself: Is an authorisation issue. The rfc user who starts the PCs didn't have enough rights.
    Br
    Günter

  • Error message when we process Service Warranties

    Hi Team,
    Not sure why user is facing the atatched error while processing the service warranties line type. While processing the Service Warranties line they tabbed through to the line and entered the line they wanted to connect to then tabbed through to the start date. Then Changed the ship date to tomorrow and when they hit save it gave this error message and blew out the start date so they required to re-enter. Also tried this on line #1 leaving the start date today and got the same results - they had to re-enter the start date. they checked with other and he said he has to do this everytime.
    Please advice what could be the issue here.
    Regards,
    Saurabh Sharma

    Hi,
    I have looked into your issue.
    For this service ticket, kindly check the Org Unit maintained in Transaction and table OFIC_BILLORG_SRV are same. If not same kindly make changes in the following path in SPRO.
    ==> SAP Implementation Guide
    ==> Customer Relationship Management
    ==> Organizational Management
    ==> Cross-System Assignment of Organizational Units
    ==> Assign Billing Units to Service/Sales Organizations
    If the above information is not helpful kindly take a look at note 861116.
    I hope this helps.
    Regards,
    Venkat

  • Transport process chain to production

    Hi,
    i changed process chain in dev system and transported to QA. What i did is created a request then goto se09, select the request and click on release. Now i went to QA system then goto STMS tcode. double click on Quality system and then selected the request and click on import. Now the request is imported to quality. Everything is fine.
    Now i want to put the same in Production system. So what is the process?
    Is the below process is correct?
    Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
    OR
    Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.

    Hi prasad,
    The procedure is same as you have adopted in quality.
    but the option raised by u seems to be same.
    Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
    OR
    Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.
    regards,
    mahendra

  • Adobe tech support advised that I uninstall my CS 5 and Adobe Reader / Editor products as two weeks ago I began receiving error messages when trying to use these products . They said call back after uninstall for reinstall assistance ,but no ones there ?

    cant download and install CS 5 reactivation .  I have the serial number

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Maintaining Transported Process Chains

    Hello,
      we transported few process chains from our Dev system to Production BW.  Now, we are trying to modify the transported process chains in Production BW.  It is asking for a transport# when we try to do this.  Is it possible to set the system, so it won't ask us for a transport# when making changes to transported process chains?
    We are currently on BI 7.0.
    Thanks.

    If it asking for transprots then Your Prodcution system is Open ....
    System Open options:
    SCC4: Changes without automatic recording
    Changes to repository and cross client customizing objects allowed
    Protection level1: NO overwriting
    eCATT and CATT allowed
    Uncheck all restrictions
    then go to se06
    System change option: global settings
    change from non modifiable to modifable
    Systsem closed options:
    Changes and transports for client-specific objects-- No changes allowed
    Client-independent object changes
    No changes to Repository and cross-client customizing objects
    Protection level 1: no overwriting
    Restriction wehnt starting CATT and ecATT:
    ecatt and catt allowed
    se06 and change all modifiable to non modifiable.

Maybe you are looking for

  • Systemexe.vi

    I am using system exe to run a batch file but just wondering how my labview program knows that all the command in the batch file is finished? I want the batch file to end before I do somethings else. thanks

  • Runtime Shared Library

    Hi, I was trying to test a flash movie that I made, and an error popped up. It said, "Your content will not stream. Runtime Shared Library preloading will require all of your content to download before the first frame can play." It also says, "The Ru

  • Update required - iOS 5.

    This box comes up when I try to download an app.

  • Table for relation between WIP and Production Order

    Dear All, Please provide me table having relation between Production Order Number and WIP for it. Regards, Sachin

  • Cant open Itunes since ive Moved my music folder to External Hardrive

    Can't Open iTunes I recently transfered music over to an external hard drive. I just bought an iphone and I can no longer open itunes on my laptop unless the external hard drive is attached. I get an error that reads: I need itunes to sync all caland