Error messages when trying to open 'File Manager'

I have just had my phone and have loaded Nokia PC Suite (I have also downloaded the latest version of Nokia PC Suite) Whenever I try to access specific functions such as File manager, i get the error message "The Operation could not be completed" The drivers for the phone seem to have installed pefectly and I can do some some functions such as synchronise with Outlook contacts (although I cannot sync. to my Outlook Inbox as this option is ghosted - Does anyone know why as this is one of the main reasons I purchased the phone?). I have re-installed all software and phone drivers and I have run out of ideas - Any help gratefully received!
Thanks in advance,
Wayne.

Do this:
Select start-run
and copy paste this commsnd :
regsvr32.exe %windir%\system32\ole32.dll
and press OK

Similar Messages

Photoshop CS6 and PS CC error message when trying to open file

The following error occurs when I try to open a file from Bridge of Windows Explore:
"The procedure entry point
?ProposeSearchBounds@StructuralImageEditing@@YA?AVBox@I@EA
BV?$point2_J@gil@boost@@AEBV21@M@Z could not be located in
the dynamic link library PatchMatch.dll"
This started happening latge in the day recently and usually a reboot solved the problem
but i am getting this every time I try open an image. What is the problerm and what are
the solutions?
Thank you john

Just thought I would update. I reinstalled PS CS6 since I had the disk available and the error message did not come back. I then launched Bridge CC and I was able to launch from Bridge without the error message but the file opened in PS CS6 so I checked my file associations in Bridge CC and they were all set to CS6 (odd) but I changed the associations for jpeg and NEF to PS CC and I tried to launch the files. ERROR MESSAGE it is the same one as I noted in yesterdays message. Any suggestions?
When I did the reinstall of CS6 it was right over the top of PS CS6. Should I do the same with CC? How do I do that? Just download from Creative Cloud Manager?
Thanks
John

I am using elements 8 and have installed the latest RAW plug in, however I am still getting an error message when trying to open files. My camera (nikon d7100) shows as a supported camera. Any suggestions?

The plug in version is 6.2.0.29, which shows that is supports my camera.

Hi Sully172,
Please check the below link
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It clearly states that D7100 requires a minimum camera raw version of 7.4
I would advise you to either use the camera raw dng converter or upgrade to Photoshop Elements 13.
Thanks

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when trying to open.....

I am getting this error message when trying to open iDVD project files from external drive on new mac book pro
Project Locked By other user
The project NYFA MARK Submission is locked by the user johncriscitello (user ID 501): 2009-12-29 01:06:50 +0000.
The project can't be opened at this time.
any ideas??

Hi Jcrisci
Welcome to apple discussions. I see this is your first post.
Any chance there are multiple users on your mac w/ separate accounts each? And are you working from the Admin account on this mac?
Message was edited by: SDMacuser

Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
Have repaired , reinstalled , created and used a restore point etc etc
How do I fix this !!! Please

...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I get this error message when trying to open a catalog.

I get this error message when trying to open a catalog. "error message: unexpected error opening catalog"

Hi Ian.
Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
Best wishes,
Magne
6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
Re: Help! Lightroom freezes after installing.
created by Ian Lyons in Photoshop Lightroom - View the full discussion
Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am gettin an error message when trying to open a contact: "There was a temporary problem accessing your address book. Please try again in 10 minutes."

I am using an Yahoo Email and I can open a list of contacts but getting an error message when trying to open any of them. My OS is Windows Vista Service Pack 2 installed on a desktop.

Does this issue occur on another browser? If this issue does occur on another browser then I would like to say that it is a Yahoo issue and not a Firefox issue.

Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

I am receiving an error message when trying to open any application in the Office for mac suite
Any suggestions??

Hello
you can try - remove and re-install microsoft office
you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
you can try use font book too detect font conflict / problem
you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
HTH
Pierre

Acrobat 9.0 error message when trying to open

Just got this error message when trying to open Acrobat Pro 9.0:
Has been installed for 6 month, use 4-5 times per week, never had an issue until this. Usually I would do an 'Uninstall' 'Reinstall' before coming to the forum, but it will not allow me to do a 'deactivitation'.Any help at all, thanks.
System Info:

Good day,
You can initiate a Repair installation from Control Panel > Programs by clicking on the Acrobat 9 installation, choosing 'Change' then following the prompts for a repair install.
I missed the part where you mentioned the error was occurring on launch. Sorry about that.
Kind regards,
David

I recently upgraded to Mac OS X. I hadn't try to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

Error message when trying to open iTunes.exe

I love itunes and everything, and its been working really great until recently (about 2 days ago) in which my iTunes stopped working. I get a message which says:
"The iTunes application could not be opened. The file or directory is corrupt and unreadable."
I went to the support section for iTunes on here on how to check these files and things and found that one file causes the problem, in which the support told me to delete it and try running it. Well I did that and the License Agreement pops up and I click agree, then the error message pops up and the file that I deleted gets redownloaded into the folder.
I have also tried reinstalling it and that has not done anything to help either. Please Help!

From http://support.apple.com/kb/TS1421 ::
Fix digital signing of Windows drivers
In some cases an issue with the digital signing of certain Windows XP drivers can prevent iTunes from launching. Use the following steps to correct such issues:
1. Highlight all of the following 4 lines of text that begin with regsvr32 and then choose Copy from the Edit menu of your web browser:
regsvr32 /s wintrust.dll
regsvr32 /s softpub.dll
regsvr32 /s mssip32.dll
regsvr32 /s initpki.dll
2. Open the Notepad program by navigating to:
Start > All Programs > Accessories > Notepad
3. In Notepad, choose Paste from the Edit menu. Note: make sure that the text that appears in Notepad is the same as what is shown above.
4. From the File menu, choose Save As.
5. In the File name: field type iTunes.bat and save the file to the Desktop.
6. Close Notepad and locate the iTunes.bat file. It should appear on the Desktop.
7. Double-click the file and you will see a black window appear on the screen for about a minute. Wait until the window automatically disappears and proceed to the next step.
8. The iTunes.bat file can be deleted at this time.
9. Try opening iTunes again.
Let us know what happens
CG

Error Message when trying to open Itunes HELP!!!

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Error message when trying to open pages

I'm having trouble opening new or existing documents using pages. I get the error message, "pages cannot be opened because of a problem. Check with the developer to make sure pages works with this version of Mac OS x. I've never had this problem before and it's been working since I purchased my IMAC back in 2010. Other programs for Iwork are working fine..Numbers 09 and Keynote 09. I tried reinstalling the software several times, restarting my computer and still no luck.. Any suggestions?

You didn't save the iWork trial.dmg somewhere by any chance?
You have not move enough parts of iWork over to the new computer. There are files in
Users > your name > Library > Application support > iWork. Get the iWork folder
MacHD > Library > Application Support > iWork '09. Get the folder
To get into the users Library you have to on Mountain Lion in the Finder click on Go in the menu while pressing down the Option key.

Error messages when trying to open 'File Manager'

Similar Messages

Maybe you are looking for