Error messages while executing File - RFC - File.
Hi,
I am doing a File - RFC - File scenario from Raj's blog.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
I am getting series of error messages.
Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
But still it shows up the same error message.
Can you guys tell me whats bad going on with my scenario?
Appreciate your help,
Venkat.
Hi Venkat,
From this line:
It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
Regards,
---Satish
Similar Messages
-
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
Ds4 can't save files. Error message: while executing onload in_opOpen.htm
All of a sudden I'm getting this error message. I can view files and create files but can no longer save files.
If I try to save a file, I get the following message:
Full text of message: While executing onLoad in_opOpen.htm, the following Javascript error(s) occurred: In file "_opOpen": onOpen is not defined
If I click ok in the alert,
The following translators were not loaded due to errors:
ASP.html has configuration information that is invalid.
Data.htm: has configuration information that is invalid.
ICERegionals.htm has configuration information that is invalid
Not sure how these were corrupted. How do I fix this problem? The resolutions I've found on line are not working.An example: delete the file called ‘WinFileCache-[random numbers].dat’.. That did not work. I'm using Windows 7 Professional.If you've already tried clearing the cache file and personal config folder: Deleting a corrupted cache file
A good next step would be restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Here are some other troubleshooting steps: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
If nothing works, a clean reinstall will probably do the trick: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Pop-up an error message while executing in foreground
Hi,
I have a requirement from my client, they want an error message while they are trying to executing the program in foreground. The main reason for this it does not create a spool while executing the program in foreground, it creates only in background.
Is there any way of doing this?
Any sort of ideas is highly appreciated.
Thanks,
SriniCheck with your ABAP technical memeber. He should be able to add the error message to the porgram
-
Error message while executing international payroll with schema x000
Dear Team,
I am getting the below error message while running international payroll with schema x000.
"Jump from DAYPR to detailed log
Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
SrinivasHi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1) T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg Period ws Description Start Date End Date Cntg Class
01 PWTC Period WS 01.01.1990 31.12.9999 1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description start Date End Date Val.Classfor PWS
01 PWTC Period WS 01.01.1990 31.12.9999 1
4) V_t508A-Work schedule rule
ESG ES grpg for ws Holiday Text PSG WSrule St Date End Date
2 Salaried Employee TCD TC 01 TCWR 01.01.1900 31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100 JEDDAH 1110 MAIN OFFICE 01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg No Wagetype Wage Type Long Text
54 01 001 1010 Basic Pay
Regards,
Srinivas -
Error message while executing a SWF File
Hi All,
Iam trying to execute a SWF file which has its actionscript
written in AS3. When i execute this, I am getting an error message
which is as follows
Verify Error 1030# Stack Depth unbalanced 1 != 0.
Can anyone tell me what could be the root cause?
Thanks in advance,
Prabakaran Srinivasan.Hi All,
I am able to find the root cause for this. For AS 3 classes,
while parsing the ABC code, every method body will be a set of
instructions in which each instruction will have an offset to it.
This offset will be useful to mark the target for branching
instructions like if, while etc.... Because, these instructions
contains targetoffset as a parameter to which the instruction has
to jump when the condition becomes true or false. The process what
i am doing is i do some code injection to replace the URLRequest
calls. The flash file in which i got this error, i did replace the
URLRequest call to my own method call and this code was being
wrapped up by an IF block. Because of the code injection, i need to
update the offset of the instructions with the difference offset
value. I did this, but i missed the jumpoffset parameter of the if
block wrapping my injected code which was the root cause. I did fix
this...
Thanks,
Prabakaran Srinivasan. -
Error message while attaching file to email
When attempting to attach a file to an email, I got the following error message: an error occured while sending mail.
Adobe Reader 8.12
Windows XP
thanks,In order to attach a file in an email - the app it self must support it. For instance, you can email a Photo in the Photos app by selecting the photo that you want to email and then tap the curved arrow icon in the upper right corner and select the email option.
Apple's Pages for the iPad allows you to email files as well - but you have to do it from the Pages App itself. Other apps also support the feature but as Meg explained, you can't attach a file in web mail - at least I haven't seen how to do it. -
Error Message while executing the Application
Hi,
I am new to Webdynpro and I created my first application by following some blog on a portal.I was able to activate my application successfully and when I executed I get this below error message.
I checked the cardinality and it is 0..1.My Inti.Lead Selection is set to NO.
I mappedthe nodes in my views also. But still i don't know whay am getting this error.
Note
The following error text was processed in the system RS2 : Adapter error in &VIEW_ELEMENT_TYPE& "VBELN" of view "Z_MYFIRST_WEBDYNPRO.MAIN": Context binding of property VALUE cannot be resolved: Node MAIN.1.NODE_VBAK does not contain any elements
The error occurred on the application server ucerp18_RS2_00 and in the work process 11 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Thanks
KiranHi,
I changed the cardinality to 1:1 and I can see the selection screen. But, can you please explain why I should change this from 0:1 to 1:1.
Now I have a new error:
After I enter the sales order Number and hit my FIND button, am getting this error:
The following error text was processed in the system RS2 : Could not find attribute VBELN
Thanks,
Kiran
Now am getting a different error:
Invalid operand type for the MOVE-CORRESPONDING statement
Thanks
Kiran
Edited by: kiran dasari on Aug 20, 2009 10:54 PM -
*& Report ZAREPAS22
REPORT zarepas22 LINE-SIZE 250.
TABLES : vbak,vbap,likp,lips,vbrk,vbrp,kna1,vbfa.
DATA : ok_code LIKE sy-ucomm,
g_container TYPE scrfname VALUE 'BCALV8_GRID_DEMO_0100_VASU',
docking TYPE REF TO cl_gui_docking_container,
splitter_1 TYPE REF TO cl_gui_splitter_container,
splitter_2 TYPE REF TO cl_gui_splitter_container,
splitter_3 TYPE REF TO cl_gui_splitter_container,
cell_top1 TYPE REF TO cl_gui_container,
cell_bottom1 TYPE REF TO cl_gui_container,
cell_top2 TYPE REF TO cl_gui_container,
cell_bottom2 TYPE REF TO cl_gui_container,
cell_left TYPE REF TO cl_gui_container,
cell_middle TYPE REF TO cl_gui_container,
cell_right TYPE REF TO cl_gui_container,
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
grid3 TYPE REF TO cl_gui_alv_grid,
grid4 TYPE REF TO cl_gui_alv_grid,
grid5 TYPE REF TO cl_gui_alv_grid.
DATA: li_fieldcat1 TYPE lvc_t_fcat,
li_fieldcat2 TYPE lvc_t_fcat,
li_fieldcat3 TYPE lvc_t_fcat,
li_fieldcat4 TYPE lvc_t_fcat,
li_fieldcat5 TYPE lvc_t_fcat,
lv_layout TYPE lvc_s_layo,
lv_variant TYPE disvariant.
TYPES:BEGIN OF gty_itab1,
vbeln TYPE vbak-vbeln,
kunnr TYPE vbak-kunnr,
erdat TYPE vbak-erdat,
END OF gty_itab1.
TYPES:BEGIN OF gty_itab2,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
kwmeng TYPE vbap-kwmeng,
netwr TYPE vbap-netwr,
END OF gty_itab2.
TYPES:BEGIN OF gty_itab3,
vbeln TYPE likp-vbeln,
ernam TYPE likp-ernam,
erzet TYPE likp-erzet,
posnr TYPE lips-posnr,
matnr TYPE lips-matnr,
END OF gty_itab3.
TYPES:BEGIN OF gty_itab4,
vbeln TYPE vbrk-vbeln,
fkart TYPE vbrk-fkart,
posnr TYPE vbrp-posnr,
fkimg TYPE vbrp-fkimg,
END OF gty_itab4.
TYPES:BEGIN OF gty_itab5,
kunnr TYPE kna1-kunnr,
name1 TYPE kna1-name1,
name2 TYPE kna1-name2,
END OF gty_itab5.
DATA:gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
DATA:gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
DATA:gt_itab3 TYPE STANDARD TABLE OF gty_itab3,
gwa_itab3 TYPE gty_itab3.
DATA:gt_itab4 TYPE STANDARD TABLE OF gty_itab4,
gwa_itab4 TYPE gty_itab4.
DATA:gt_itab5 TYPE STANDARD TABLE OF gty_itab5,
gwa_itab5 TYPE gty_itab5.
Global data
DATA: gt_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
gwa_fieldcat LIKE LINE OF gt_fieldcat.
Macro to fill field catalog
DEFINE m_fill_field_catalog.
gwa_fieldcat-tabname = &1.
gwa_fieldcat-fieldname = &2.
gwa_fieldcat-scrtext_s = &3.
gwa_fieldcat-scrtext_l = &4.
Append field catalog details to field catalog internal table
append gwa_fieldcat to gt_fieldcat.
END-OF-DEFINITION.
*selection screen for selecting range of values
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln. " OBLIGATORY. " OBLIGATORY
SELECTION-SCREEN END OF BLOCK b1.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*DEFINE LOCAL DATA.
*DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
CASE sender.
WHEN grid1.
READ TABLE gt_itab1 INTO gwa_itab1 INDEX e_row-index.
CHECK ( gwa_itab1-vbeln IS NOT INITIAL ).
CALL METHOD grid1->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'ORDER_DETAILS'.
WHEN grid2.
READ TABLE gt_itab2 INTO gwa_itab2 INDEX e_row-index.
CHECK ( gwa_itab2-vbeln IS NOT INITIAL ).
CALL METHOD grid2->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DELIVERY_DETAILS'.
WHEN grid3.
READ TABLE gt_itab3 INTO gwa_itab3 INDEX e_row-index.
CHECK ( gwa_itab3-vbeln IS NOT INITIAL ).
CALL METHOD grid3->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'BILLING_DETAILS'.
WHEN grid4.
READ TABLE gt_itab4 INTO gwa_itab4 INDEX e_row-index.
CHECK ( gwa_itab4-vbeln IS NOT INITIAL ).
CALL METHOD grid4->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'BILLING_DETAILS'.
WHEN grid5.
READ TABLE gt_itab5 INTO gwa_itab5 INDEX e_row-index.
CHECK ( gwa_itab5-kunnr IS NOT INITIAL ).
WHEN OTHERS.
ENDCASE.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT vbeln kunnr erdat FROM vbak INTO TABLE gt_itab1
WHERE vbeln IN s_vbeln.
creating docking container
CREATE OBJECT docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc EQ 0.
ENDIF.
Create splitter container
CREATE OBJECT splitter_1
EXPORTING
parent = docking
rows = 1
columns = 3
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
Get cell container
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_left.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = cell_middle.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 3
RECEIVING
container = cell_right.
Create 2nd splitter container
CREATE OBJECT splitter_2
EXPORTING
parent = cell_left
rows = 2
columns = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
Get cell container
CALL METHOD splitter_2->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top1.
CALL METHOD splitter_2->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom1.
Create 3rd splitter container
CREATE OBJECT splitter_3
EXPORTING
parent = cell_middle
rows = 2
columns = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
Get cell container
CALL METHOD splitter_3->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top2.
CALL METHOD splitter_3->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom2.
Create ALV grids
CREATE OBJECT grid1
EXPORTING
i_parent = cell_top1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid2
EXPORTING
i_parent = cell_bottom1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid3
EXPORTING
i_parent = cell_top2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid4
EXPORTING
i_parent = cell_bottom2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid5
EXPORTING
i_parent = cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
lv_layout-zebra = 'X'.
lv_layout-cwidth_opt = 'X'.
lv_variant = 'ZAREPAS22'.
Display data
PERFORM prepare_alv_fieldcat1 CHANGING li_fieldcat1.
*commented lines i suppose to include here....
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab1
it_fieldcatalog = li_fieldcat1
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat2 CHANGING li_fieldcat2.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab2
it_fieldcatalog = li_fieldcat2
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat3 CHANGING li_fieldcat3.
CALL METHOD grid3->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab3
it_fieldcatalog = li_fieldcat3
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat4 CHANGING li_fieldcat4.
CALL METHOD grid4->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab4
it_fieldcatalog = li_fieldcat4
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat5 CHANGING li_fieldcat5.
CALL METHOD grid5->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab5
it_fieldcatalog = li_fieldcat5
EXCEPTIONS
OTHERS = 4.
Link the docking container to the target dynpro
CALL METHOD docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
EXCEPTIONS
OTHERS = 4.
IF sy-subrc EQ 0.
ENDIF.
NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD grid2->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid3->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid4->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid5->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR
'EXIT' OR
'CANCEL'.
SET SCREEN 0.LEAVE SCREEN.
USER HAS PUSHED BUTTON "DISPLAY OREDERS"
WHEN 'ORDER_DETAILS'.
PERFORM order_show_details.
WHEN 'DELIVERY_DETAILS'.
PERFORM delivery_show_details.
WHEN 'BILLING_DETAILS'.
PERFORM billing_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR : ok_code.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ORDER_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM order_show_details .
define local data
DATA:
ld_row TYPE i,
gwa_itab1 TYPE vbak.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_itab1 INTO gwa_itab1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT kunnr name1 name2 FROM kna1 INTO TABLE gt_itab5
WHERE kunnr = gwa_itab1-kunnr.
SELECT vbeln posnr matnr kwmeng netwr FROM vbap INTO TABLE gt_itab2
WHERE vbeln = gwa_itab1-vbeln.
*REFRESH: gt_LIPS.
ENDFORM. " ORDER_SHOW_DETAILS
*& Form DELIVERY_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM delivery_show_details .
define local data
DATA:
ld_row TYPE i.
gwa_itab2 TYPE vbap.
CALL METHOD grid2->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_itab2 INTO gwa_itab2 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT SINGLE * FROM vbfa WHERE vbelv = gwa_itab2-vbeln
AND vbtyp_n = 'J'.
SELECT posnr matnr FROM lips INTO TABLE gt_itab3
WHERE vbeln = vbfa-vbeln
AND vgpos = gwa_itab2-posnr.
*REFRESH: gt_LIPS.
ENDFORM. " DELIVERY_SHOW_DETAILS
*& Form BILLING_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM billing_show_details .
define local data
DATA:
ld_row TYPE i.
gwa_itab3 TYPE lips.
CALL METHOD grid3->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_itab3 INTO gwa_itab3 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT SINGLE * FROM vbfa WHERE vbelv = gwa_itab3-vbeln
AND vbtyp_n = 'M'.
SELECT posnr fkimg FROM vbrp INTO TABLE gt_itab4
WHERE vbeln = vbfa-vbeln
AND vgpos = gwa_itab3-posnr.
ENDFORM. " BILLING_SHOW_DETAILS
*& Form prepare_alv_fieldcat
FORM prepare_alv_fieldcat1 CHANGING lpi_fieldcat1 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB1' 'VBELN' 'Ord Num'(004) 'Order Number'(005).
m_fill_field_catalog 'GTY_ITAB1' 'kunnr' 'sold party'(006) 'SOLD TO PARTY'(007).
m_fill_field_catalog 'GTY_ITAB1' 'ERDAT' 'Ord Date'(008) 'Order Date'(009).
lpi_fieldcat1[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat1
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat2 CHANGING lpi_fieldcat2 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB2' 'vbeln' 'sales Doc'(010) 'sales document'(011).
m_fill_field_catalog 'GTY_ITAB2' 'POSNR' 'sales Doc'(012) 'sales documentITEM'(013).
m_fill_field_catalog 'GTY_ITAB2' 'matnr' 'Mat num'(014) 'material number'(015).
m_fill_field_catalog 'GTY_ITAB2' 'kwmeng' '*** ord qty'(016) 'cumilative order qty'(017).
m_fill_field_catalog 'GTY_ITAB2' 'netwr' 'nwt val'(018) 'net val of item'(019).
lpi_fieldcat2[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat2
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat3 CHANGING lpi_fieldcat3 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB3' 'posnr' 'del item'(020) 'delivery item'(021).
m_fill_field_catalog 'GTY_ITAB3' 'matnr' 'mat num'(022) 'material number'(023).
lpi_fieldcat3[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat3
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat4 CHANGING lpi_fieldcat4 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB4' 'posnr' 'bill item'(024) 'billing item'(025).
m_fill_field_catalog 'GTY_ITAB4' 'fkimg' 'act inv'(026) 'actuval inv qty'(028).
lpi_fieldcat4[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat4
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat5 CHANGING lpi_fieldcat5 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB5' 'kunnr' 'cust no'(029) 'cust number'(030).
m_fill_field_catalog 'GTY_ITAB5' 'name1' 'name1'(031) 'name1'(032).
m_fill_field_catalog 'GTY_ITAB5' 'name2' 'name2'(033) 'name2'(034).
lpi_fieldcat5[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat5
*appending
*FORM append_catalog1 USING value(p_fname)
value(p_tname)
value(p_coltext).
DATA : v_fcat TYPE lvc_s_fcat.
v_fcat-fieldname = p_fname.
v_fcat-ref_table = p_tname.
v_fcat-coltext = p_coltext.
APPEND v_fcat TO li_fieldcat1.
*ENDFORM. "append_catalogHi Srinivas,
What is the Report Requirement,
What is the Error Message u r getting. -
Error message while deleting files from the tracker
I deleted four files from Acrobat.com before removing them from the desktop tracker and now I don't seem to be able to remove them or stop collecting data on the files in the tracker. Am I missing something or is there not a way to get rid of them?
Rufus ChaneyPlease try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested. -
"When I try to create a new file I am getting this message: "While executing getDynamicContent in AddressURL.htm, a JavaScript error occured".... what should I do? Thank you, Lisa
Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Start with steps #4, #12 and #10.
Nancy O. -
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
While trying to update Motion 5.0.2 I continuously reviece this follwoing error message.
The file “InkBleed03.mov” couldn’t be saved in the folder “Particle Images.localized”.
Motion will not allow me to update.
Running Mac OS X Version 10.7.2 Lion on a MacBook Pro
Processor 2.8 GHz Intel Core 2 Duo
Any ideas?Hi Frank,
Thanks.
My HD is a "normal" HD, so I guess it's HFS+. (According to Disk Utility it is Mac OS Extended (Journaled).
The NAS is WD MyBook Live Duo. I just plugged into my Time Machine.
I am relocating using Aperture "relocate originals for project" under the File tab.
Ahh, thanks for the answer to question 1.
Yes, I am trying to relocate them, but tried different things to find the problem.
And the problem seems to be that when an image gets an extra attribute (when it's downloaded from the internet, when it is comes from a mail message) then Aperture seems not to be able to move the file.
I.e. Aperture presumeably asks the Finder or kernel to perform this task, and this then fails because of the extra attirbutes that were set.
I now found a way of manually removing the extra attributes, but that is a pain.
Think of this normal workflow:
- someone sends me an email containing images
- I move the images to my Desktop
- I then import the images into Aperture
- I then decide to relocate my images for that project to my NAS
Then is when this problem occurs.
So I just tried to relocate to another place on my HD.
That works fine.
I looked again at the error message.
And it says "could not set attributes com.apple.metadata:kMDItemDownloadedDate on destination file descriptor" .
So, yes, it seems like it has to do with the NAS not supporting setting the extra attributes.
And as long as there are no extra attributes on an image, there is no problem.
(Not completely true, but I have another thread about that)
Thanks Frank, I have to digest this a bit.
Regards
Jan -
Error message while uploading the flat file
Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshayhi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm -
Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain
Maybe you are looking for
-
Can't sync game with 60GB Video iPod
This morning I purchased Phase for my iPod. (5thG 60GB Video) And I can not sync this game to my iPod. I get the error {The game "Phase" was not copied to the iPod "mcarrolls iPod" because you are not authorized to play it on this computer.} I normal
-
Confirmation against Backend PO for SRM@ERP2005
Hi, I'm having a problem in posting confirmation for a B/E PO. I have received an error message in the inbox of the userid that I have used to carried out the confirmation which says 'Entry in outbound table not found'. I have clicked on the linked p
-
Find actual %%EOF end of file
I am trying to identify a PDF-file in a binary data stream. I realize a PDF starts with %PDF and ends with %%EOF, but since there can be multiple %%EOF markers in one file, how do I determine the actual file end? For technical reasons, I would prefer
-
10.5.4 installed, Macbook Pro doesn't start up
Hi, I just installed 10.5.4 via Software Update. But now my Macbook Pro doesn't startup correctly anymore. I hear the start up sound then the white screen with apple and the spinning wheel. Then then fans start to grow louder and louder until the who
-
How to re-download CS6? [was: Software]
I have already purchased Creative Suite 6 - Design and Web but have lost my software. How can I download it?