Error messages with itunes and winamp when i plug my ipod in

my itunes wont open and when i try it gives me a message about debuging so i got winamp and got the ml-ipod plug-in hoping i could get my music on my ipod that way and when i got it it gave me the same message about debuging so i reformated my ipod then i tryed to use itunes agin but it still wouldnt work then i try winamp again it opened and didnt give me the messege but it wont register that the ipod is pluged in and it wont show the portables tab at all
so if u can give me any advise i would realy appreciate it
thanks

Maybe some of these will help:
http://support.apple.com/kb/HT2311
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3297
http://support.apple.com/kb/PH12487
Hope some thing here helps

Similar Messages

  • I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it

    I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it

    Hello frankini
    Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • Help! When I clicked on iTunes it came up with an error, I deleted iTunes and now when I try to re-download it, it tells me 'apple mobile devices' failed to start- what do I do!?

    Help! When I clicked on iTunes it came up with an error, I deleted iTunes and now when I try to re-download it, it tells me 'apple mobile devices' failed to start- what do I do!?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Error messages with iTunes 11.0.1....

    I am getting a series of error messages with iTunes 11.0.1.... (-42076) & (-50) and cannot download any app updates...everything else seems to be fine.....
    anyone any ideas.......

    Mmmmmm how strange.... have just closed and reopened and problem seems to have cleared.....

  • CAN'T START IPAD ERROR MESSAGE SHOWS ITUNE AND POWER CORD

    my ipad wouldn't start as usual, it came up with error message showing itune and power cord sign.

    Your ipad is in recovery mode.
    You need to connect it to a computer running itunes as indicated.

  • I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • I just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

    i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • I had to reinstall itunes and now when I plug in my ipod itunes does not automatically come up so I can log in, how do I fix this?

    I had to reinstall itunes and now when I plug in my ipod itunes does not automatically open to my library or where I can access the itunes store.  What do I do now?

    Open iTunes and connect your iPod. Select your iPod in iTunes from the Source list. (I'm assuming this still works, although you didn't indicate if it did or didn't.) Make sure the box is checked to Open iTunes when this device is connected. You should be all set!

  • I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone?

    I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.

    You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
    Hope that helps

  • I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off

    I turned on my MacBook Pro and got an error message with several lines of code and then it turns off

    Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?

  • I dropped my iphone4 on the ground , now it is stuck in recovery mode with itunes and usb , when i do the restore process it comes up with an error(21).. what should i do? plz help

    iphone stuck on recovery mode,,, cannot restore due to error 21. tried all ways to solve the error, but no use... plz help

    Hi D’pak,
    Thanks for using the Apple Support Communities. I understand that you are receiving error 21 when attempting to restore your device in recovery mode. The following resource provides troubleshooting information for this error message:
    Get help with iOS update and restore errors - Apple Support
    http://support.apple.com/en-us/TS3694#hardware
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    - Matt M.

  • Error Messages for iTunes and Quicktime, what do I do?

    Hello, I'm in need of some help.
    Let me walk you all through what I did for the last 4 hours:
    (important note: I suck at far too much computer stuff, so I am fully aware that as you read the following, at certain points I probably made the problem much worse than it needed to be, I am not proud of this, but everything you read did happen, stupid as it probably was for me to pursue the problems in the particular way that I did. Hindsight is 20/20.)
    I updated my iTunes v7.7 to v8.0 today, and after trying it out for a while decided that I didn't like it and wanted to go back to what I was using before.
    So, because I didn't know what else to do, I tried to re-install the original iTunes software that came with my iPod (a 20gig classic I bought in 2004). That version of iTunes was v6.0 (again, 3 years ago).
    Part way through the installation process, I got a message that said that, because I had a newer version of iTunes on the computer already, it wouldn't install the version on the disk.
    So I uninstalled v8.0, restarted my computer, and installed the v6.0 from the CD-ROM I had.
    It was then that I found I had NONE of the 6000+ songs in my iTunes window. I checked my computers files to find that they were still in the library, but my iTunes screen was completely devoid of all my music.
    So I tried to get it all back on the player. I discovered that by right-clicking "Play" for the individual files from the folders in my iTunes that they would come up on the player, but that meant that I'd be clicking in 6000+ songs, one by one, till they were all back. I didn't want to do that.
    So I tried a system restore (again, read "important note" at top of post). After that happened and I was looking at my desktop again, tried opening iTunes, and it gave me a message that said:
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    And it asks if I wanna send an error report. I decline, then try opening Quicktime. Same message. So I try to uninstall both programs (i know, i know, "important note"), and iTunes uninstalls, Quicktime does not, because, as my computer puts it, "a fatal error occurs."
    But since I have iTunes uninstalled, I go to apples site and download iTunes v8.0 again. After waiting for all that to get done, I get the same error message.
    So I peruse this very discussion forum, and after looking for a good while at what is being recommended I go to a site and download v7.7 again.
    Again, I get the same error message.
    So here I am. I've tried working it out myself for the last 4 hours, and I seem to have made things worse.
    So please, please, PLEASE, I ask for any help you can provide.
    Can I get my iTunes back?
    Is my Quicktime corrupted now?
    Am I totally screwed?

    I had the same problem when I went to upgrade to 8 and then downgrade back to 7.7. To fix this is a little involved, but you can do it. Let me put it this way, I talked my mother through it on the phone, and she has a hard time finding the power button So no worries, I'll help you get back up and running. I am running Vista now, so I am going off of memory for Vista, so bear with me.
    I would do the following:
    1. Uninstall both iTunes and Quicktime by going to Control Panel-Add Remove Programs, and choosing first Quicktime then iTunes.
    2. Clean your registry. Easy now, it is not that hard. To do it, go to http://www.ccleaner.com/download and download CCleaner. It is free and has NO spyware. Install it and run the registry cleaner. It will remove any trace of both programs from the registry. Now you have 2 choices.
    3a. Now I would install iTunes 8. Because you already installed it once, it converted its database file that it uses to track the library and play lists up to the iTunes 8 standard.
    3b. If you have no problem loosing your playlists and library settings, you can go back to iTunes 7.7. To do this, first search for "itunes.ttl". To do this, go to Start-Search Files and Folders- and type in "iTunes.ttl" Once the search finishes, it will tell you where it is located. Navigate there using Windows Explorer or My Computer and delete it. Now you can install iTunes 7.7 with out any errors. You will not loose any files! just your playlists and it will not remember what is in your library.
    As far as adding your songs again, did you try to re-importing your music? If you go to the file menu-add folder to library. It will bring up a dialogue box that will allow you to browse to the folder with your music.
    Let me know if this works. I will help in anyway I can.
    Good Luck,
    linesma

  • Error message with iTunes 7.7

    I just downloaded iTunes 7.7 and every time i use it a box keeps popping up that says "AppleMobileDeviceHelper has stopped working" over and over until I close iTunes. what does that mean and how do i make it stop?
    Tom
    Message was edited by: TomCat4680

    I have the same problem. Deleted the mobile device helper prog. But then I cant update and sync my iTouch. Re-installed iTunes 7.7 and still get the same error message. When I connectiPod error message is along the lines of 'required software missing please try later'.
    How do i fix the 'Apple Mobile Device Helper has Stopped Working' problem and get back to using iTunes?
    Laptop is runnig 7.6 with no problems.

  • Error message installing Itunes and new Safari browser

    Hi! I can't seem to download the newest version of ITunes. I've had it forever with no problems. I get error message 2738. I got the same error when I tried to download the new Safari Browser for Windows. I also got it when trying to uninstall Quicktime. I think that Vista is not cooperating with Apple. Anyone else having this issue? Any ideas?
    Dell Dimension 8400   Windows Vista  

    even though the following document refers to XP rather than Vista, it's worth a crack on a Vista box:
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

Maybe you are looking for

  • Dual booting arch (usb) and ubuntu (grub2)

    Greetings, I'm trying to dual boot Arch linux (installed without a bootloader on a USB SSD) and Ubuntu 10.04 (installed on a hdd with GRUB2) but can't get Arch to boot. (Oh and I already have windows dualbooted) The entry grub autogenerated: menuentr

  • Java.sql.SQLException: No suitable driver : Please Help

    Hi I m getting the following error while running my java program. I have keppt the oracle driver classes in the class path and Class.forName("jbcd... oracledriver") ; is not giving any problem ... error occurs when it tries to get Connection from Con

  • Swf file causing rollover images not to work

    I've inserted a Flash file into my webpage in Dreamweaver and it broke all my rollover images.  Even deleting the swf file and reinserting the rollover images doesn't work.  I've read a few threads on this but can't quite find exactly what I'm lookin

  • My photo tab on iCloud is gone how do i get it back

    there are several tabs on my icloud but my photo stream tab is not there how do i get it on or back?

  • CUCM not communicating with SIP Gateway

    This is my lab environment: VOIP.MS --> 2811 CUBE--> CUCM 10.5.2 Attached is my configuration on both my cube and publisher What is going on is if I make a call from my IP Communicator phone it does not call out.  Also if I do a debug ccsip all, I ge