Error messegas in sequence

Hello all
I have planning sequence, with several planning functions in it. i dont create data in the functions, i only check data.
In each function i check different data, and if there is an error, i post error message in the end of the function.
The problem: If there is an error in the first function, i get an error message, end all the other functions dont run.
If the message are warning types, i dont have this problem.
Best
Yuval

Hi David,
what is wrong with this approach. The user can fix the first error and check the data again.
And you should be aware that you also save some runtime here, because the system does not continue checking potentially corrupted data.
Regards Matthias Nutt
SAP Consulting Switzerland

Similar Messages

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

Error messege in Background Job(SM37) - Please enter a valid date

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,Because this datein the past

Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603 while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error messege stop at the time of mb1c

Hi gurus
When am posting the stock into my plant system throwing error messege in the pop up window like
stop: Errror accessing function module ; Fmk_Fkrs_Read
parameter: Ip_Fikrsip_Fma_Objnr
it is coming please help me in this above problem
Thanks & Regards

hi,
there might have been some problem earlier with stock posting or some one was trying to debug the stock posting function module. And in the process he has set a stop command because of which the program in the process of executin is literally stopping. Normally break points should be used to debug programs since they will be deleted once the user logs off. so please ask your abaper to remove the stop statement and reexecute the transaction.
regards
sadhu kishore

BW error: "invalid call sequence for interface when recording changes"

I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.

I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks.

Can not update iphoto always got error messege

I tried many times to update iphoto the update file size is 1.2 GB but no way . always the down load reach near to 400 MB and got error messege. can anybody help me to resolve this issue.
Thx

The downloaded file is incomplete? Never larger han 400 MB? According to http://support.apple.com/kb/DL1650 it should be 730.91 MB.
Is your network stable? Do you have any anti virus filters or firewalls active?
Do you have enough free disk space?
I'll ask the hosts to relocate your question to the AppStore forum. There are more experts for this kind of problem.
I see you solved it. Great!
Regards
Léonie

SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS

Dear Sir,
During creation of excise invoice with ref to material doc system give a error massage JTAX access sequence is missing. Access sequence and tables are already exist in system.
1.PO
2. GR with excise capture& post here Part-I&II are genarated.
3.Invoice
4.Return delivery with reference to above goods receipt document.(122 m.type)
5. J1IS- Creating outgoing excise invoice w.r.to return delivery material document.
JTAX Access sequence missing at the time of excise invoice creation in J1IS

The same error coming while consignment stock issue to cost center.
1.Consignment Info record with excise tax code.
2.PO consignment purchase order.
3.GR with excise capture & post here Part-I&II documents are created.
Material document created but there is no accounting document.
4.While doing Consignment stock issue to cost center system generate an error message
Access sequence JTAX missing ( ) Message no. VE306"

Mozilla sudenly will not launch. There is no error messege it just ignore me. Uninstalled then installed latest version. Same thing happens. Can you advise? Thanks,

I have tried launching from the desktop shortcut, the all programs area (regular and safe mode)and directly from the programs folder. But it won't come up and I do not get an error messege. I have used Mozilla for years without a problem.
Thanks

You've gone thru much trouble even tinkering with registry. Don't you think its time to make a backup of your system & do a clean install of t he os? And without installing any other program install first the pc suite. I assumed you got the correct cable & pc usb are working.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Formal error: Invalid calling sequence for function modules

Hi All,
I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing.
The clearing works fine.
After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared item)
I have used the bapi : BAPI_CTRACDOCUMENT_CREATE in the same function module that i have developed for FQEVENT 620 Payment: Transfer Line Items for Clearing.Here i am getting an error "Formal error: Invalid calling sequence for function modules".
So please let me know where i can use this bapi to post fi-ca document.Is there a BAdi or Enhancement Spot where i can use this BAPI or tell me what should i do to overcome this error.
Regards
Venkat

Venkat:
While I am confused about your business process - creating an open item when clearing one seems strange. Look into event 0020 which is called after documents are posted - it may present the opportunity to post process additional documents.
regards,
bill.

PP-CONVERTING ERROR MESSEGES TO INFORMATION MESSEGES

HI ALL,
I AM CREATING ROUTING I WHICH I AM ENTERING EXTERNAL PROCESSING CONTROL PP02.
WHEN I AM PRESSING ENTER, SYSTEM IS GIVING ME A ERROR MESSEGE TO ENTER SUBCONTRACTING DATA LIKE PURCHASING INFO REC., PURCHASING GROUP, COST ELEMENT, SORT TEXT. WHICH IS CORRECT.
BUT I WANT TO CONVERT THIS ERROR MESSEGE TO WARNING OR INFORMATION MESSAGE AS ERROR WILL CREATE PROBLEM IN UPLOADING ROUTINGS BY BDC PROGRAM.
PLEASE GUIDE
NITIN

Hi Nitin,
i hope ur getting error message regarding control key..
i donot think u can convert that Error message to warning message. u canot convert all messages like this,
Instead of this, i would suggest to change the settings at Control Key, Goto OP67-> Set.External Processing = X and upload , after thatt change the settings to + (Ext op).
Please try this,
I would request u, donot use capital letters while posting.
Regards
Pradeep

Error ORA-02289: sequence does not exist

While I was practicing chapter 6 a book on "hands-on oracle database 10 g express edition for windows" by Mr. Bobrowski forwarded by tom kyte, I like to be one those as well, lol, the living legend of oracle technology <page 225-226> , I got the following error while trying to insert the data manually
error ORA-02289: sequence does not exist
I also checked the sequence, it does exist ,
host-ids, db-ids, ap-ids all do exists
I am wondering my OS windows xp and however, I have entered AIX in host OS field and 5.2.0.0 in the hostos_version field and cpu=4
I kind do not understand this too since my pc running windows xp
any help would be appreciated since i couldn't go forward in my practice.
I e-mailed the author of the book (oracle Press) but no-reply so far, well I can understand that there is no money.

Basically, I copied everything from the cd-rom provided in the book of this author steve, oracle press. I logged on using my account <system> and password. The user is here only one which is <system>.
Everything was working well, until then as per the direction in the chapters upto 1- to mid 6, this is the first time I am stuck in following this book's simple excercises. It also asks me to look at the object if the sequence host_ids does exists in the drop down combo, as a matter of fact it does exist.
I am still wondering my question "my OS windows xp and however, I have entered AIX in host _OS field and 5.2.0.0 in the host_os_version field and cpu=4
I kind do not understand this too since my pc running windows xp "

Multiple error messeges for the FB01 Fb05 and FBV1

Hello Experts,
We are presently posting the IDocs through the above transactions.But we are facing issues with multiple error messeges.The multiple error messeges can not be identified all at once but only oncw we correct a particular error messege we can correct the next one.Is this possible through any BAPI Will the BAPI show all the error messeges at once ??
Thanks,
Vijay.

As of my knowledge, I don't think its possible through any BAPI or anythings else.
When you debug the program, you will find the error message during the program run.
Suppose you have the program with 100 lines.
One Error message come in line 40, then system will show the error message and stop reading the program again. When you solved the error, then system will again read the next (41) line.
You have to solve the error messages one by one.

How display more error messeges in BSP

Hi all,
I want to diplay more error messeges in BSP.
I'm working in the extention standar class CL_CRM_BSP_PM_GENERIC_1O
in the method
IF_CRM_BSP_PROCESS_IL~CHECK_BEFORE_SAVE
with the following parameters:
ls_message-msgid = 'ZGIVAUDAN'
ls_message-msgty = 'E'
ls_message-msgno = '001'
CALL METHOD gr_intlay_1o->set_status_message
EXPORTING
is_msg_show = ls_message
With this procedure the system shows only one error messeges. If I repeat the same step for another message number the system displays only the last message.
What's the code or parameters need to show multiple error messages in the same page (BSP)?
Thanks in advance,
Best Regards
Lorenzo

Hi Lorenzo,
Go through the links,
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/625f3c689a6c4de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/aedd3a6dac703be10000000a11405a/frameset.htm
Regards,
Azaz Ali.

Error messeges

getting error messeges and my computer has prompt me to reinstall extended player, but i dont know how

What is the make and model of your computer and what specific error message are your receiving.
Are you getting this message playing online games? If so, this is not a problem of Windows OS or HP software and you should be talking with the game manufacturer to resolve the problem.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Error messegas in sequence

Similar Messages

Maybe you are looking for