Error Messege, Can't Open iTunes.

I'm still having this problem,
so I took it off. But quicktime
is still having the same problem.
Encountered a problem & needs to close.
I can't uninstall is cause when I do
try it stops cause theres a fatal error?
I can't even repair it.

Thanks.
Another cause of the 7 can be damage to the other software applications associated with iTunes. (In particular, Apple Application Support, but I've seen the same sorts of trouble produced by QuickTime as well.)
When you have been uninstalling and reinstalling iTunes, have you just been uninstalling the iTunes application? Or have you removed all associated applications prior to reinstalling, as per the following document?
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]

Similar Messages

  • I get an itunes.exec error and can't open itunes

    I cannot open itunes because I get an itunes.exec error each time.  How do I correct this?
    Boognutly

    What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

  • ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes

    Hi, whenever I try to open iTunes I also get this message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
    I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
    I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
    Thanks.

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • Error 7: can't open iTunes

    In the last few days, each time I try to open iTunes, it doesn't open and I get Error 7 (iTunes was not installed correctly. Please reinstall iTunes). I've tried reinstalling it and it starts working when I do, but when I restart my computer the error comes back. Obviously, it isn't practical to reinstall iTunes every time I turn on my PC, so what can I do to fix this error once and for all?
    Thank you very much.

    Thanks.
    Another cause of the 7 can be damage to the other software applications associated with iTunes. (In particular, Apple Application Support, but I've seen the same sorts of trouble produced by QuickTime as well.)
    When you have been uninstalling and reinstalling iTunes, have you just been uninstalling the iTunes application? Or have you removed all associated applications prior to reinstalling, as per the following document?
    [Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]

  • ITunes Error -600 (Can't open iTunes) Help!

    Tonight I was working with my iPod and iTunes on a Mac; I ejected the iPod, but a static message on iTunes had locked it up. The message was that the iPod was updating. I finally was able to force quit iTunes, but now I cannot open iTunes from the Dock or Finder.
    The message I get is: The operation could not be completed. An unexpected error occurred (error code -600). Has anyone got a solution? Please?
    iMac   Mac OS X (10.3.9)  

    Hi Jase,
    without beeing pedantic, this is a the itunes for Mac, so you might post your question on the itunes for window,
    when you go on itunes and check your purchase history, you have the option to report a problem related to your purchase, ok also i supposed you have quicktime, yes. It will be helpfull if you had in your profile the version of your application itunes 7 or quicktime etc...
    the code error seems to be associate with "service unavailable".
    hope it help

  • I can't open iTunes - error 13014

    I recently installed a 2TB external hard drive and iPhoto Library Manager on my MacBook Pro (MacOS 10.7.3), and now get the error message: can't open iTuns (error 13014).
    Any suggestions would be appreciated. I have tried to reboot, but to no avail.
    Thank you.
    MichaelT

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • CAN'T OPEN iTunes, get message "can't open Error (-50)?

    Can't open iTunes, get error message (-50)?

    The 50 when launching iTunes can indicate a damaged Apple Application Support. So first I'd try a Repair install of your Apple Application Support.
    Restart the PC. In your Add or Remove Programs control panel, select Apple Application Support, click "Change" and then click "Repair".
    Does the repair install go through okay? If so, does itunes launch without the (-50)?

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • All of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    all of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Can't open itunes.  i get this message "run time error R6034 an application has made an attempt to load the "C" runtime library incorrectly"  ???

    I can't open itunes on my PC  i get this error message "runtime error R6034 an application has made an attempt to load the "C" runtime library incorrectly" ???  i also get this message "itunes was not installed correctly please reinstall" error 7(windows error 1114)  still no luck. ???

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I keep getting the following message:  Runtime Error...Microsoft Visual C + Runtime Library  Program C:\Program Files\iTunes\iTunes.exe  R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.  Help!!

    I keep getting the following message:
    Runtime Error...Microsoft Visual C++   Runtime Library  Program C:\Program Files\iTunes\iTunes.exe
    R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
    Please could someone help with this query as I am at a loss as to why this problem is now occurring?  Thank you.

    Check the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • I can't open Itunes on my mac. error 130001. how to fix?

    I can't open Itunes on my mac. error 130001. how to fix?

    Hi gingerjacker,
    Welcome to the Support Communities!
    Did you restart your Mac and try again?  Sounds simple, but it's a good first step when troubleshooting.
    If the issue persists you may need to delete iTunes from the Applications folder and download a fresh copy.  This does not affect your iTunes library, which is in a different location.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Cheers,
    - Judy

  • I can't open iTunes on my PC and I'm unable to uninstall or reinstall.  I get 2 errors - 2502

    I can't open iTunes on my PC and I tried uninstalling & reinstalling but I get two error messages 2502 & 2503.  I gave windows 8 and I've never had this problem before.

    Hello adniltrawets
    If you are having issues with iTunes starting up, check out the article below to troubleshoot and isolate the issue. It will walk you through starting up in Safe Mode as well as testing in a new user to see if it does not the same thing there.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    -Norm G.

  • I can't open itunes on my HP laptop.  I keep getting the error message " You don't have the proper permissions to open this file".

    Hello-
    I can't open itunes on my HP laptop that uses Windows 7.  I keep getting the error message "you don't have the proper permissions to open this file".  I removed all Apple downloads and reinstalled itunes 10.6.3 windows 64-bit numerous times, but I still get the same error message. Please help.

    Just want to add that after hours of searching and following every different blog on this issue, iTunes/apple you have lost my vote. What a joke...!

  • I can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.

    can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.  How can i fix this?  need very detailed step by step instructions on how to fix. thx

    Check out this discussion link:
    https://discussions.apple.com/thread/2777410?threadID=2777410&tstart=15

Maybe you are looking for

  • Calling a stored procedure of oracle 8 from java

    hello, i made a stored procedure as below in 1 program :      String url = "jdbc:odbc:rjc1";      Connection con = DriverManager.getConnection(url,"scott","tiger");      Statement stmt = con.createStatement();      String createProc =           "Crea

  • Error in BPM in PI 7.1 : BPE_ADAPTER" UNKNOWN_MESSAGE

    Hi All, I have made some changes in Integration process in PI 7.1 and executed my interface, but now it is giving error BPE_ADAPTER">UNKNOWN_MESSAGE. Also it is showing "No object type found for the message. Check that the corresponding process is ac

  • Need help with external monitor

    ok here it is my duaghter pushed my powerbook off hte table and it broke the screen and i have purchased a dvi to vga adapter to work on a n external monitor is there anything else i need to do to make it work right now all i get is white screen anyh

  • Plays fine in IMOVIE and IDVD but disk doesn't play right in home DVD Playe

    I created a movie in IMovie and it plays fine there. I converted it to IDVD and it plays fine there, but when I burn the actual DVD, it takes 12 hours! and then it won't play on my home DVD player. (It starts out fine, shows the menu and has the movi

  • Can't keep my place while editing

    When I am making changes to my library, I am always brought to the top of whatever list I am working on after each change.  For example, I don't like a lot of genres on my list, I keep everything classified under about 12 headings, so when I add new