Error messege stop at the time of mb1c

Hi gurus
When am posting the stock into my plant system throwing error messege in the pop up window like
stop: Errror accessing function module ; Fmk_Fkrs_Read
parameter: Ip_Fikrsip_Fma_Objnr
it is coming please help me in this above problem
Thanks & Regards

hi,
there might have been some problem earlier with stock posting or some one was trying to debug the stock posting function module. And in the process he has set a stop command because of which the program in the process of executin is literally stopping. Normally break points should be used to debug programs since they will be deleted once the user logs off. so please ask your abaper to remove the stop statement and reexecute the transaction.
regards
sadhu kishore

Similar Messages

Contacts app stops all the time i open it.

Every time i try to connect to my Xperia Z2 Contacts app or Phone, it automatically bugs it and i have 2 errors messages, depending on the time :
- the Contacts application has unfortunatly stopped
or
- the com.andriod.phone processing has unfortunatly stopped
And when i finally manage to call someone, it cuts the call within the next 60sec....
Any guess how to stop that happening ? Where the pb is coming from ? It is really becoming an hassle not to be able to telephone on a telephone.
Thank you all,
Jet K
Solved!
Go to Solution.

JetKraze wrote:
Hi Hussain,
Thanks for the reply
What do you mean by clear data ? Reinitiate the phone = erase everything ?
If I do so, how can i keep all my data and reinstal them later one ?
Thanks
No. I mean if you go into settings, then Apps, then go in the All tab then look for Contacts, click on it, then scroll down and click the clear data.
Do the same for Phone.
Before you do this try backing up your contacts. But you have to do this through the Contacts app itself so I think it's going to be hard.
If you can access contacts, then go into it, click the three dots at the bottom and select 'Export Conatacts'.
Hope this helps.

Error in price at the time of creating SHC fro catalogue item

Hi
Cann anyone help me with the following problem.
Error in price at the time of creating SHC fro catalogue item
mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets).
The system multiplies up the price by 10 & 10 and at that moment I transfer the shopping trolley it multiplies up again.
The price for 10 pallets was gladly to be 32720,50 - Buttttttttttttt it turns into 3.272.050.
Please help me in providing a solution for this
Best Regards.
sairam.

Hi
Please go through this ->
Note 739562 Simplified pricing: Price 0.00 if catalog item.
This is the standard system response as of EBP 3.5 Support Package 05 or Note 569275.
This also depends on how you uploaded the price in the catalogs ->
For price details you should use the following characteristics:-
/ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code
Perhaps you have to maintain field pricechangeable in BADi-InterfaceIF_EX_BBP_CATALOG_TRANSFER in method - ENRICH_ITEM_DATA. This will make sure you can edit the price_
Other useful pointers ->
Re: Price determination
Re: free item shopping from catalogue....product with zero price
OSS note 550071 - price for catalog product
How to Upload Price details for a catalog in CCM 2.0
Do let me know.
Regards
- Atul

Error is coming at the time of Installation of SAP Netweaver 04's sp7

Hi All,
An Error is coming at the time of Installation of SAP Netweaver 04's sp7
Error: Unable to create an account for <SystemName> for <SAP Service sid>
can anyone suggest me regarding this.
Regards
Phanikumar

Hi
Thanks for ur suggestion,
I got the solution to this error.
The main reason is at the time of Intsalling Netweaver on windows 2003 server with Administrator rights, as per the Installtion manual we have to follow the windows password policy must and should and give the same for the Master Password while installing, then we won't get error.
Thanks & Regards
phanikumar

How do I watch videos without them stopping all the time?

How do I watch videos without them stopping all the time?
I have Snow Leopard on two computers and IOS5 on IPad 2. Videos will not run without stopping. I am talking about videos like on Yahoo and YouTube etc.

Slow Internet download speeds are typically responsbile, if you have 5 Mb/s or slower it's really bad. 10 Mb/s or higher is preferred and 20 Mb/s or better is ideal.
If you use a alternate DNS service like GoolgeDND or OpenDNS which has to fetch Akami hosted content from overseas instead of using your much closer ISP servers.
If your router is the old G model, upgrade to N.
If your wifi is open, you could have leechers. The more on the network, even a fast one, the slower it gets.
Secure your network info here etc.,
https://discussions.apple.com/message/16276201#16276201

"Budget Exceeded" error not appearing at the time of changing PR but appearing at the time of PO change.

Dear All,
At the time of PR value change after creation of PO budget exceeded error is not appearing even though the PR value exceeds the budget. But at the time of changing the same value in PO, budget exceeded error is appearing.
List of steps:
PR created.
PR released
PO created with reference to PR and released.
PR value changed to a value more than the available budget - No budget exceeded error.
PO value changed in accordance with the PR - System throwing the budget exceeded error.
Now the issue is why the system bypassed the budget exceeded error at the time of PR value change and only giving the error at the time of PO value change. Also, we observed that while changing the quantity in PR which results in exceeding budget, system is giving the error. But while changing the value system is not giving the budget exceeded error.
Your inputs will be highly appreciated. Thanks in advance.

Hello Saurabh,
Thank you for your inputs. Below is the output of CJI5.
Ref,Doc Category Debit Date     Oty       Object    Cost Elem.   Val/CO Area Crcy   Total Qty.     UM
PREQ                  28.05.2014    WBS     XXXXXX    XXXXXX           0.00                         0            EA
POrd                    28.05.2014    WBS                                       14,000.00                1000          EA
From the above output i think system is not capturing the PR commitment. I'm not sure as i'm basically into MM and dont know much about PS.
Why the system is stopping with budget exceeded error at the time of PR creation and not giving any error while changing the PR value after PO creation. System is giving budget exceeded error if quantity is changed in PR. Please explain the standard system behavior and suggest how to enable control at the time of PR value change.
Thanks in advance.

JQuery UI MultiSelect Widget--error like Stop running the script

Hi
i have imported CSS and JS into APEX Application from the below url and multiselection is working fine but the issue is , when i click on other items which have nearly 5000 records then its displaying pop up box like "Stop running the script.A script in this page causes IE to run slowly.If its continues to run your computer may become unresponsive"
http://www.erichynds.com/jquery/jquery-ui-multiselect-widget/
Can i get selected records shoul appear first in lov?
Please help me to solve this issue.
Regards
Narender B

Narender,
The problem is due to the volume of items in your multiselect. The error you reference is not coming from APEX but, rather from the browser. In Chrome, you would get a slightly different message. As a safety precaution, browsers will start a timer when a script is executing and raise the warning you reference if said scripts are taking too long. This is usually a good thing. For example, the script might contain an infinite loop.
There really is not going to be a way to use a mutli-select in this manner with 5K items. I would encourage you to think about the usability of this control for your end user. Are they realy expected to scroll through 5K items to find individual ones that they wish to select?
You could consider switching to a tabular form and using the check box in a similar manner. You can sort on this so that the selected ones appear first.
-Joe

Cost Estimate error is coming at the time of billing document release

Dear All,
Hi, I am facing one problem that is whenever i am releasing the billing document system gives the error message.
Error : No standard cost estimate found for this material 164001001.
Here problem is some finished products we have a cost run and other finished materials we don't have a cost run. Other finished materials billing document release time we are facing the above error. There is no costing run for other finished materials. Here we have a CO-PA.
I have mainatined the costing key settings(ke40) in co-pa. In Ke40 t.code i have maintained the below settings.
1. I have selected transfer standard cost estimate radio button under determine material cost estimate.
2. Costing variant is 1010( This is our varaint)
3.Costing version is 01
4. Period indicator : Current standard cost estimate account to entry in material master.
I have maintained the above settings in ke40 t.code. Please suggest if any thing is wrong on above settings.
And also i have maintained costing key to material type assignments in ke4j t.code.
Here i maintained the three point of valuation (PV), One is real valuation, second is manual planning, third is automatic planning.
here i have assigned material type (fert) to costing key in costing key1 filed.
Please suggest if any thing wrong in the above settings. Still i am facing the same error at the time of billing document releasing time. Anybody please help to me. It is a very urgent to me.
Thanks & Regards,
Reddy

Hi,
This is a common error when COPA is activated and when the Costing Key is assigned according to the Material type in KE4J.
When you need Cost estimation for few FGs and dont require for other FG, then you list out the materials for which you require SCE and then assign these list of materials to the costing key in KE4H(Costing key for Products) leaving out those which dont require.
But detail the requirement further to facilitate the solution.
Thanks & Regards,
Ravi Kumar

Final Cut Constantly crashes, Plus error code -600 half the time

Please someone help. I have the newest and fastest Imac available and final cut studio 2, all of the software is up to date. I'm currently running tiger. What is wrong. I've had no problems in the past, and recently the problems keep coming up more and more. I can't even open my project for more than 2 minutes before it will jam up on me. I have to force quit the program, then half the time I'll get error code -600. So I'll have to restart the computer and try again. I have my media files on an external hard drive. I don't know what is wrong. Is it because I have all the files including the project files on the hard drive? Anyone have any suggestions? Should I re-install my final cut program or move all my files from my external hard drive to the one and only internal one. (defeats the purpose of only being able to use one hard drive though.)

I'm using standard DV files. I've seached and searched for answers to this problem, and no one has answered anyone yet, other than try to update your software. I forgot to mention that also this system will not restart, and has to be forced off by holding down the power button, and also it loses an entire day of work! Twice it has done this to me. I have backups set to every 10 minutes, I also saved the project on 2 seperate files, and on seperate hard drives. Both projects reverted back to an entire day missing, back up files and all. I never lost this much data and work with premiere. The only reason I switched is because my TV Station uses final cut pro, and everyone hates it. I'm starting to find out why..... Is there a number I can call, the forums don't seem to have any answers, neither does google.

My MacBook Pro won't stop announcing the time in Japanese.

It was funny at first but now I want it to stop.

Hey TravisBickle,
Thanks for the question. Let’s check your Date & Time preferences, and disable the “Announce the time” option:
OS X Mavericks: Set date and time options
http://support.apple.com/kb/PH14090
1. Choose Apple menu > System Preferences, then click Date & Time.
2. Do any of the following:
- Click Date & Time, then choose to set date and time automatically or manually.
- Click Time Zone, then select your city.
- Click Clock, then make sure that “Show date and time in menu bar” is selected.
If you want to hear the time announced, select “Announce the time,” then choose from the pop-up menu how frequently you want the time announced. If you like, customize the voice.
Thanks,
Matt M.

IBots error, works most of the times

Hi all,
I am getting the following error in iBot(s) (however this happens inconsistently, and the iBots runs fine on most days):
"[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (/shared/_ibots/common/Report)
Error Codes: U9KP7Q94
Error Codes: AGEGTYVF"
Have double checked my configurations, moreover this error is not consistent and runs fine most of the times which leads me to believe this is not an authentication issue.
Has anyone faced a similar situation, do let me know if more details are required?

Hi,
Make sure you are pointing the ibot to the right path of presentation catalog. In the job manager on the application server, Under Ibot tab change to point to right presentation catalog. Also make sure you have right port information. Try restarting the server on which OBIEE is installed. This should resolve your issue.
Thanks,
-Amith.

Stop showing the time

I just got an iPod Classic, and its really annoying me that the time is always showing. When I'm listening to music, I want to have the current song on the screen, not the time. However, it only shows the song for a few seconds, then the time comes back on. I have to touch the wheel to get the song to show again. This is very annoying. I wear a watch for a reason. I don't need the time displayed on my iPod. Any suggestions on how to get the time to stop showing?

I have an issue with the time at the moment. I have set the clock to 24hr, however on 'screen saver' mode it is displaying 12hr time!

My Mac won't stop speaking the time even though I have turned it off. What can I do?

I tried to turn off "Announce the time" in "Date & Time" preference pane in "System Preferences" on my Mac running 10.9.4. It is unchecked. Yet it is still speaking the time. What can I do to get it to stop? I have tried unchecking/checking closing System Preferences many times to no avail; it just keeps announcing the time. Any ideas?

Have you tried a restart?

ICal won't stop taking the times out of my event names

I make my calendar events as follows: "10:00 doctor appt"
This makes it so I can see the time at a glance and means that I didn't forget to put a time. I also like feeling entirely in control of my calendar.
However, iCal keeps taking the time out and adding it to the state of the event, which I don't like. I don't mind it changing the state as long as it leaves the time in the text. I've tried to find a way to turn off this functionality, but I can't find a checkbox for it. I've been having to manually fix the text on each event once or twice before the time will stay, which is extremely annoying. Is there any way to get the text to stay that I've missed? If not, can Apple please include a fix for this in their next update? Thanks.

Betafly,
Generally speaking, I enter my events in the "Month" view.
Try entering the event by typing "doctor appt at 10:00" This is what is displayed when I use that entry method:
If the "Month" view window is too small the time will not display, so make sure that the window is large enough to display the time.
Also, open Calendar Help and look for "Add events to calendars." That will help explain various text entry techniques.

Error In IR at the time of activating data types

I am getting an error at teh time of activating the data type
Namespace urn:rfctoftpserver:am is not defined in the software component version SAP_ECC_DABUR_POS , 9.5 of sap.com.
How ever I have saved the name space in Display Software component version!!
Pls help!

Hello,
This problem basically happen due to the following reasons:
1) when you try to copy the datatype from one Object to other and the namespace is not activated in course of it.
2) If you have deleted the datatype but it still remains in the Objects list
Resolution:
1) Try to change the datatype name and activate
2) if it still doesn't work have a look at the Software component relation with the datatype namespace relation

Error messege stop at the time of mb1c

Similar Messages

Maybe you are looking for