ERROR: Missing driver file /opt/SUNWjass/Drivers/ldm_control-secure.driver.

Environment:
Solaris 10u10
vm server for sparc 2.0 V22736-01.zip
p10264419_420_SOLARIS64.zip --> SUNWjass-4.2.0.pkg.tar.Z
Problem: Documentation and LDOM/SST tool refer to "ldm_control-secure.driver", but the file does not exist.
bash-3.2# ./install-ldm -p
Welcome to the Oracle VM Server for SPARC installer.
You are about to install the LDoms Manager package, SUNWldm, that will enable
you to create, destroy and control other domains on your system. You will
also be given the option of running the Oracle VM Server for SPARC Configuration
Assistant (ldmconfig) to setup the control domain and create guest domains.
If the Solaris Security Toolkit (SST) is installed, you will be prompted to
optionally harden your control domain.
Oracle VM Server for SPARC Configuration
Once installed, you may configure your system for a basic LDoms
deployment. If you select "y" for the following question, the Oracle
VM Server for SPARC Configuration Assistant (tty) will be launched
following a successful installation of the packages.
(You may launch the Configuration Assistant at a later time with the
command: /usr/sbin/ldmconfig, or use the GUI Configuration Assistant
which is bundled in the Oracle VM Server for SPARC zip file - see
README.GUI for more details)
Select an option for configuration:
y) Yes, launch the Configuration Assistant after install
n) No thanks, I will configure the system manually later
Enter y or n [y]: n
Given the capabilities of the LDoms Manager, you can now change the
security configuration of this Solaris instance using the Solaris
Security Toolkit.
Select a security profile from this list:
a) Hardened Solaris configuration for LDoms (recommended)
b) Standard Solaris configuration
c) Your custom-defined Solaris security configuration profile
Enter a, b, or c [a]: a
The changes made by selecting this option can be undone through the
Solaris Security Toolkit's undo feature. This can be done with the
'/opt/SUNWjass/bin/jass-execute -u' command.
Verifying that all packages are fully installed. OK.
ERROR: Missing driver file
/opt/SUNWjass/Drivers/ldm_control-secure.driver. <-------------- DOES NOT EXIST
bash-3.2#
bash-3.2# ls -al /opt/SUNWjass/Drivers/
total 876
drwxr-xr-x 2 root root 32 May 8 10:24 .
drwxr-xr-x 15 root root 21 May 8 10:24 ..
-r--r--r-- 1 root root 63935 Jul 25 2005 audit_private.funcs
-r--r--r-- 1 root root 42960 Jul 25 2005 audit_public.funcs
-r--r--r-- 1 root root 312 Jul 25 2005 clean.driver
-r--r--r-- 1 root root 2401 Jul 25 2005 clean.run
-r--r--r-- 1 root root 3093 Jul 25 2005 clean_private.funcs
-r--r--r-- 1 root root 53510 Jul 25 2005 common_log.funcs
-r--r--r-- 1 root root 10155 Jul 25 2005 common_misc.funcs
-r--r--r-- 1 root root 1023 Jul 25 2005 config.driver
-r--r--r-- 1 root root 20904 Jul 25 2005 driver.init
-r--r--r-- 1 root root 7299 Jul 25 2005 driver.run
-r--r--r-- 1 root root 39699 Jul 25 2005 driver_private.funcs
-r--r--r-- 1 root root 90923 Jul 25 2005 driver_public.funcs
-r--r--r-- 1 root root 38268 Jul 25 2005 finish.init
-r--r--r-- 1 root root 3861 Jul 25 2005 hardening.driver
-r--r--r-- 1 root root 598 Jul 25 2005 install-Sun_ONE-WS.driver
-r--r--r-- 1 root root 485 Jul 25 2005 secure.driver
-r--r--r-- 1 root root 1056 Jul 25 2005 server-config.driver
-r--r--r-- 1 root root 3784 Jul 25 2005 server-hardening.driver
-r--r--r-- 1 root root 1788 Jul 25 2005 server-secure.driver
-r--r--r-- 1 root root 1467 Jul 25 2005 suncluster3x-config.driver
-r--r--r-- 1 root root 4329 Jul 25 2005 suncluster3x-hardening.driver
-r--r--r-- 1 root root 2092 Jul 25 2005 suncluster3x-secure.driver
-r--r--r-- 1 root root 1446 Jul 25 2005 sunfire_15k_sc-config.driver
-r--r--r-- 1 root root 5845 Jul 25 2005 sunfire_15k_sc-hardening.driver
-r--r--r-- 1 root root 1791 Jul 25 2005 sunfire_15k_sc-secure.driver
-r--r--r-- 1 root root 274 Jul 25 2005 undo.driver
-r--r--r-- 1 root root 13976 Jul 25 2005 undo.funcs
-r--r--r-- 1 root root 2557 Jul 25 2005 undo.run
-r--r--r-- 1 root root 2151 Jul 25 2005 user.init.SAMPLE
-r--r--r-- 1 root root 498 Jul 25 2005 user.run.SAMPLE

Applied recommended patch cluster...
Explicitly applied 122608-08
bash-3.2# patchadd 122608-08
Validating patches...
Loading patches installed on the system...
Done!
bash-3.2# ls -al /opt/SUNWjass/Drivers/
total 966
drwxr-xr-x 2 root root 38 May 8 18:37 .
drwxr-xr-x 15 root root 21 May 8 10:24 ..
-r--r--r-- 1 root root 64345 Jul 23 2010 audit_private.funcs
-r--r--r-- 1 root root 41937 Jul 23 2010 audit_public.funcs
-r--r--r-- 1 root root 1007 Jul 23 2010 cis-config.driver
-r--r--r-- 1 root root 5311 Jul 23 2010 cis-hardening.driver
-r--r--r-- 1 root root 2242 Jul 23 2010 cis-secure.driver
-r--r--r-- 1 root root 312 Jul 25 2005 clean.driver
-r--r--r-- 1 root root 2434 Jul 23 2010 clean.run
-r--r--r-- 1 root root 3093 Jul 25 2005 clean_private.funcs
-r--r--r-- 1 root root 65067 Jul 23 2010 common_log.funcs
-r--r--r-- 1 root root 10298 Jul 23 2010 common_misc.funcs
-r--r--r-- 1 root root 1023 Jul 25 2005 config.driver
-r--r--r-- 1 root root 22242 Jul 23 2010 driver.init
-r--r--r-- 1 root root 9092 Jul 23 2010 driver.run
-r--r--r-- 1 root root 42969 Jul 23 2010 driver_private.funcs
-r--r--r-- 1 root root 96975 Jul 23 2010 driver_public.funcs
-r--r--r-- 1 root root 39218 Jul 23 2010 finish.init
-r--r--r-- 1 root root 3888 Jul 23 2010 hardening.driver
-r--r--r-- 1 root root 598 Jul 25 2005 install-Sun_ONE-WS.driver
-r--r--r-- 1 root root 1499 Jul 23 2010 ldm_control-config.driver
-r--r--r-- 1 root root 4809 Jul 23 2010 ldm_control-hardening.driver
-r--r--r-- 1 root root 840 Jul 23 2010 ldm_control-secure.driver
Thanks.

Similar Messages

  • Quicktime 10.2 facebook Export/Upload error Missing Video File

    Hi,
    I got the error "Missing video file" (on trhej export progress page) after export/upload to facebook using Quicktime 10.2
    File is less than 2Gb and less than 20' - 16/9
    Anyone has a clue what prompts this message ?
    thanks

    Hi there 1412bunny,
    I would recommend taking a look at the troubleshooting steps found in the articles below.
    OS X Mountain Lion: If an app quits unexpectedly
    http://support.apple.com/kb/PH10928
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/ht1199
    -Griff W.

  • Dbping error - Missing license file

    When I run the dbping utility to test my Oracle connection I get
    the following error:
    $ java utils.dbping ORACLE scott tiger dev1
    Missing license file for: WebLogic Server 6.1
    Error encountered:
    java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!
    I am running WebLogic 6.1 on Solaris 8 with Oracle 8.1.7. I ran
    the dbping utility from the BEA home directory (/opt/bea) where
    the license file (license.bea) is located.
    Thanks,
    David

    David,
    Did you run the setEnv script before issuing the dbping command?
    <BEAHOME>/config/mydomain/setEnv.sh
    cd $BEAHOME
    java utils.dbping ORACLE scott tiger mysid
    NOTE: Be sure to update the JAVA_HOME and WEBLOGIC_HOME 'paths' in the setEnv
    script
    Chuck

  • Cannot uninstall after error missing help file.

    After an error that the help file is missing, I tried to uninstall the program so I could reinstall it.  It will not uninstall and I cannot reinstall it using the original CD.

    I got it fixed finally by doing your manual uninstall.  Had to remove several components in the registry before it would finally reinstall.  Thanks for getting back to me.
    Dave

  • After I upgrade to Lion OS my Lexmark printer mod. x1185 does not work anymore. I need the scan and copy functions, since I have a HP laserjet for printing. Even in the new (sep/08) driver file from apple there is no driver for my printer. Anyone could h

    Driver for lexmark x1185 (series 1100) for MAC OS 10.7. Anyone has a solution ?

    You should contact Lexmark. They have not released a driver for this printer since 10.3, and they no longer sell it. You could try the Generic PostScript PPD and see if you get limited functionality.
    Hope this helps.

  • Error opening password file

    Hi, I'm traying to start up a database in sqlplus on SuSE 8.2 and Ora9.2, I have the next error:
    SQL> conn / as sysdba
    Connected to an idle instance.
    SQL> startup pfile=/opt/ora9/admin/pavilion/pfile/initmydb.ora
    ORACLE instance started.
    Total System Global Area 101781824 bytes
    Fixed Size 450880 bytes
    Variable Size 83886080 bytes
    Database Buffers 16777216 bytes
    Redo Buffers 667648 bytes
    ORA-01990: error opening password file '/opt/ora9/product/9.2/dbs/orapw'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    My password file is /opt/ora9/product/9.2/dbs/orapwmydb
    How can I use my orapwmydb file?

    Hi Marco,
    as far as I know, you have to use the REMOTE_LOGIN_PASSWORDFILE = SHARED option in your init...ora file.
    In this case you have one password file for one or more databases. It can only have the entries for SYS and INTERAL.
    I'm sorry to cannot answer your question of having different password files for different databases %-)
    Klaus

  • Unix Installation Error - Error parsing licence file

    Hi All,
    I'm trying installed OBIEE in HP-UX Box. I got a CD from my partner and trying to install OBIEE. But i got error at the first step itself. Below is the error:
    Error parsing licence file '/opt/oraclebi/Server/Oracle_Business_Intelligence/licence.xml'. The licence file does not match its signature. Please contact Siebel tecnical support.
    Please help me. This first time i'm installing OBIEE.
    Regards
    Raj

    Is there anybody can help. It is urgent. I need to setup the development server ASAP.

  • Missing PDFMaker files. Do you want to run the installer in repair mode?

    I just installed Adobe Acrobat 8. I am running XP and Office 2003. When I am trying to create a PDF file, from multiple files (combine files option), I get the error, "Missing PDFMaker files. Do you want to run the installer in repair mode?"
    I choose YEs, and it install something and then restarts, but it still does not work. Same thing happens every time. Thanks for your help!!!!

    What sort of files are you trying to combine. My suggestion is to make your life simple. Create the pdfs separately, then combine the resulting pdf files.

  • Missing license file

    Hi,
    I installed Weblogic7.0 beta and got the evaluation license license_wls7.bea from
    the website. I changed the file name to license.bea and copied it to BEA home
    directory. When I started the server, I got error: Missing license file for Weblogic
    Server 7.0. I added BEA home directory to classpath, still got the error. This
    is a new installation.
    Thanks for your help!

    Wendy,
    Can you download the **non**-beta version of WLS 7.0 and see if the problem reoccurs?
    See the following URL
    http://commerce.bea.com/downloads/weblogic_server.jsp
    Chuck Nelson
    DRE
    BEA Technical Support

  • Itunes install trashes drivers for DVD drive

    Installed iTunes V6 on Packard Bell MIT-RHE-B laptop
    iTunes runs OK but driver for DVD drive (NEC ND6650A)is no more (yellow ! in device manager)
    Only fix was to restore machine from CD (the drive was OK to boot from from the BIOS)
    When restored "OnRec" (a DVD writer program) was uninstalled, the machice rebooted & iTunes reinstalled.
    Guess what same problem, the DVD drive driver was again trashed.
    Has anyone got any ideas? Please dont say get a new laptop, which belongs to my 19 year old neice.

    Yeah, this seems to be a Packard Bell specific problem and yes I do know how to fix it. I am going to copy and paste what I wrote to another Packard Bell user just so I dont have to retype it. I really think this is a Packard Bell issue...
    For the most part, what's occurring is one of two things. Either...
    A) an application (such as iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
    or
    B) a virus (or trojan) burrows its way into your file structure, and creates an element of itself disguised as a .SYS file. We've seen this happen before with viral elements disguising themselves as audio or video card driver files, in the efforts of masking themselves from lower-class anti-virus programs (or un-updated ones). In this case, they take on the name of a driver file that the optical drives are "familiar" with, and so, with the intention of being "fast, friendly, and efficient", the optical drives are tapped to utilize this new "driver" file... and it gets referenced in the registry as such.
    However, when your anti-virus actually snaps to it, and removes the virus / trojan, and you go off on a virus-killing mission, galavanting through the registry and cleaning the little buggers out in Safe Mode and everything... you might remove the viral elements... but... the reference to them might still remain. The device manager is still looking for that "driver file", and will cause the optical drives to lock up in a Code 39 or Code 41 because of it.
    Either way, he thing to do to reclaim your optical drives is located in your registry here:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
    You'll want to have that open, and a mini-window of the following:
    START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
    Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
    At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
    Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
    This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal.
    Here is a microsoft article, its regarding easy cd creater, but its pretty much a similiar thing
    http://support.microsoft.com/kb/314060/EN-US/

  • I always receive receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll have to click on run. Would like missing entry permanently installed on computer file

    I always receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll
    Missing entry: Run DLL entry
    I then click onto the run box below the message and then can access my homepage by double clicking on the Mozilla icon.
    Can anybody tell me how to get the missing entry permanently into my programme files?

    Probably problem with Dell printer,DLCFtime.dll is part of Dell printer driver software, maybe you must update the driver or re-install the software, read here for more information:
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/missing-entry-run-dll-entry/dd6f8f71-ad23-4eff-8a9d-ac8b86d9a199
    http://support.euro.dell.com/support/topics/global.aspx/support/kcs/document?c=uk&l=en&s=gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true
    http://www.tek-tips.com/viewthread.cfm?qid=1396261
    http://forums.majorgeeks.com/showthread.php?t=229356
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • 11i rapidwiz error for missing vision.drv driver file during installation.

    I am trying to install 11i (11.5.10) on OEL4 32-Bit.
    Uisng "Express Install"option to configure VISION databsae.
    Rapidwiz failed with following error stating AC-00401 missing vision.drv
    Checking Disk contents in - /ebsstage/startCD/Disk1/rapidwiz
    Checking Disk contents in - /ebsstage/oraAppDB/Disk1
    Checking Disk contents in - /ebsstage/oraAppDB/Disk1
    AC-00401: Driver file missing for disk: 1 in the location: /ebsstage/oraAppDB/Disk1/data/driver/vision.drv
    I have only tow following drivers files present in that folder, But there is no vision.drv present.
    ./data/driver/Disk1.drv
    ./data/driver/prod.drv
    Where is the vision.drv?
    Thanks,

    Hi,
    MD5 checksum from md5sum_Linux as provided by Oracle for Disk1:
    5efa65008610d985ea58bd592006ef38 oraAppDB/Disk1/data/stage/data_dat219.zip
    4a7b0cf91bab8296f4ca122a857848b9 oraAppDB/Disk1/data/stage/data_log50.zip
    eb174a20e2a86c435fed40f4f5a12aaa oraAppDB/Disk1/data/stage/data_log48.zip
    5f9e42dfa53e9338645821a430d69b29 oraAppDB/Disk1/data/stage/data_dat220.zip
    c4a3aa6fd0ccb6790c67308723cfbfee oraAppDB/Disk1/data/stage/data_log49.zip
    72b0172ae6039fd49b0ac852b0758e0e oraAppDB/Disk1/data/stage/data_sys52.zip
    1c23c2e9bcc871edce6e72f0f4047e64 oraAppDB/Disk1/data/stage/data_dat133.zip
    065d44afeffe1036e19d6065236859d8 oraAppDB/Disk1/data/stage/data_dat132.zip
    70f6c2a1c20ba2ffdc27ea6ac4cbd42c oraAppDB/Disk1/data/stage/data_dat146.zip
    c8cba08eca0587ff5bdb995d6825c29b oraAppDB/Disk1/data/driver/Disk1.drv
    b928aa352358d54cc4a5b5882e4470a0 oraAppDB/Disk1/data/driver/vision.drv
    c6fcf9200b77931a9eeb97a1a09619cf oraAppDB/Disk1/data/driver/prod.drv
    d7194a1cb606570d46b8285798a10670 oraAppDB/Disk1/disk.label
    Follwing is th output of my staging area for Disk1 which is different from Oracle:
    [oracle@ebs11i40:/ebsstage/oraAppDB/Disk1]$ find . -type f -print
    ./data/stage/data_dat127.zip
    ./data/stage/data_sys42.zip
    ./data/stage/data_sys51.zip
    ./data/stage/data_sys41.zip
    ./data/stage/data_dat216.zip
    ./data/stage/data_dat220.zip
    ./data/stage/data_dat28.zip
    ./data/stage/data_dat22.zip
    ./data/driver/Disk1.drv
    ./data/driver/prod.drv
    ./disk.label
    Thanks.

  • Tecra M7: Can't create Recovery CD: Missing CDDVD.ini - Error loading INI file: RDC_info.ini

    I just recently purchased a Tecra M7, but the system does not come with recovery media, just a Recovery partition and a Recovery Disk creator.
    However, when I try to run the Recovery Disc Creator, it replies with "Error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini".
    I opened this file to try to determine the error, but the contents simply refer to a file named CDDVD.ini. I have looked all over the Hard Drive, even mounted the Recovery Partition, but could not find this file.
    Searching on Google, I found that this file regularly goes missing, and that without it, the recovery media cannot be created. One person reported Tech Support emailing him the file, another was emailed by another user.
    In both cases, the user was immediately able to make the disks. In any case, it seems to be a standard file, referring to "Add_info.ini" (Application and Drivers Disks) and "Rec_info.ini" (OS Recovery Disk), fairly consistent and unchanging through all systems that use this method to build disks.
    Please, could someone email me theirs or post it here so we can all see?
    If/when I receive this file, once I determine it works I will post it here.
    Daniel

    I have talked to Tech Support, and the Tecra M7 w/ XP Tablet Edition does not have Recovery Disks available yet. I was told to check back in a couple of weeks.

  • Error reading product file driver files

    When attempting apply a large merge patch I receive the following error:
    Screening out files not valid for this installation...
    Determining valid on-site files...
    AutoPatch error:
    The following file is missing:
    /oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
    AutoPatch error:
    Error reading product file driver files [complete; make tapes]
    AutoPatch error:
    Error determining valid on-site files
    Any ideas?
    I've tried using options=noprereq option, but that didn't help.

    - Try to restore the file from a backup you have Or just copy it from any other environment.
    - Make sure that you have included all pre-req patches in the merged file.
    I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

  • Error: missing ] after element list Source File: javascript:%20[object%20XULElement] Line: 1, Column: 9 Source Code: [object XULElement]

    Can you help me out in letting me know what this means and how I can fix this? I found it in my tools menu under error console. It was listed as a warning, but then there was a option to highlight and evaluate the original warning message that was listed as
    Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped.
    Source File: http://www.msn.com/
    When I cut and pasted message in the code evaluate box and pressed enter the warring message became an error then stated:
    Error: missing ; before statement
    Source File: javascript:%20Warning:%20Expected%20color%20but%20found%20'null'.%20%20Error%20in%20parsing%20value%20for%20'background-color'.%20%20Declaration%20dropped.%20Source%20File:%20http://www.msn.com/%20Line:%200
    Line: 1, Column: 10
    Source Code:
    Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped. Source File: http://www.msn.com/ Line: 0
    I am writing to ask for guidance on what to do and how to fix this.
    I current have Firefox as my default browser. I have IE 9 and Windows 7 home ed on my HP lap top that has AOL preloaded into it as the mail provider. I am a beginner user and when I got the computer my cousin set up Mozilla and Firefox as a search browser and I like it.
    I also have norton security

    I think, the problem is with the order (in configuration file) of path to search headers:
         /opt/oracle/product/10g/10.2.0/precomp/admin/pcscfg.cfg
              sys_include=(/usr/include,/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
              include
              include=(/usr/include)
              include=(/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
    In the filesys:
         ./usr/include/sys:
         -r--r--r-- 1 bin bin 17786 Aug 13 2007 types.h
         ./opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include/sys:
         -rw-r--r-- 1 root system 18288 Mar 22 2008 types.h
         mode_t came from:
         #include <sys/types.h>
    sys/types.h:
         * POSIX Extensions
         typedef unsigned int uint_t;
         typedef unsigned long ulong_t;
         * POSIX and XOPEN Declarations
         #if defined(_LP64) || defined(_I32LPx)
         typedef uint_t mode_t; /* file attribute type */
         #else
         typedef ulong_t mode_t; /* (historical version) */
         #endif

Maybe you are looking for

  • Change CSV device information in subscription?

    We have: SQL Server Reporting Services 2008 R2 SP2. We have a report subscription that renders in CSV.  The ReportServer.config file has UTF-8 for the Encoding for the CSV rendering.  We want to leave that alone.  We want to change the encoding to UT

  • Can I use two different frequencies on a roaming network?

    I have a roaming network with a first generation Airport Extreme (i.e., first square model), with a first generation Airport Express connected via cable to make up the roaming network.  This is for a detached office that is about 50 feet and several

  • Workflow recommendation

    I'm a 3d animator and all my stuff is rendered out as still image sequences. I have for years just imported these into premiere and worked on them directly as I haven't had much to do in the way of editing. Playback was choppy, but acceptable. I'm no

  • How to pass object from JSF to backing bean

    Hi, I have a JSF page using repeater and RichFace Toolbar:         <h:form id="professional-profile">             <a4j:repeat value="#{profilesBean.profiles}" var="lang" binding="#{profilesRepeaterBean.repeater}">                 <rich:togglePanel st

  • Unable to Load NAM Module - showing PwrDown

    I have a NAM Module installed in a Cat 6509 and I am unable to bring it online. The Show Mod command shows that the module is in the PwrDown status. If I reset the module by reseating it in the chassis I get a logg message saying: %C6KPWR-SP-4-DISABL