Error: Missing Password

Hi,
I am using Portal 10 g and BI 10g. I created a portal page using disocverer worksheet. Recently when I tried to click "customize", I always get this error message "Password Missing" and also unable to create a new portlet using the specific connection.
I had logged in to Enterprise Mgr, and went to the public connection property. I clicked the "edit" icon for the specific connection and saw that the password was blank so I retyped the password. But I still got the error and when I checked the connection property, my password was not saved. Does anyone know how to "save" the password so I won't get the missing password error again?
Really appreciates any help! :)
Cheers,
Angeline

Hi Angeline,
Yes, when you create the public connection you need to put the user's password, if you dont put the password the connection are ok, but when yoy try to connect throught portal this is the tipical error message: "Password Missing".
1) try to edit the Discoverer Connection properties throught EM and put the users password
2) I was the same error and I discovered that editing the password in the connection properties is OK but Portal show the same message: "Password Missing". Then, I erased the Discoverer Connection throught EM and I created a new Discoverer Connection with the users password and its works fine..
Regards
Jose Troya

Similar Messages

After setting up my desktop Firefox, my mobile Firefox tries to sync and then reports an error of "Missing password"

I have successfully set up sync on my desktop Firefox install.
When I try to add a device:
# I enter the 3 segment code from my mobile Firefox in desktop Firefox dialog
# desktop Firefox shows "Sync Complete" dialog
# mobile Firefox shows in options view that sync status is not connected due to "Missing password"
# attempting to connect shows a dialog with
* the proper sync key (locally saved) from my desktop firefox
* a filled password field
* the correct email address

Try to clear the Firefox Data from Android Settings > Manage Applications and try again to add your device to Desktop Sync. It should work as expected.

Yahoo e-mail missing password

A new I-pad for Christmas presented the following problem. The settings etc were transferred via i-tunes backup and everything was fine except that the yahoo e-mail account consistently refused to connect with an error message of password missing. Deleting and re-instating the account gave the same result. The old Ipad and a mac pro could access the account as before via the web and regular e-mail accounts. Fortunately a tech savvy son-in-law fixed the issue by using another way to setup the yahoo mail account. For those who have struggled with this, here is a link to his blog with details:https://charlesshearnontech.wordpress.com/2012/12/26/ipad-ios6-yahoo-mail-doesnt -work-missing-password-error-message/
This seems to have been a problem with both Iphones and Ipads either when IOS upgrades have been made or with new devices.

I too have the same problem since yesterday. I am unable to acess my yahoomaill still. Please help. I already done the suggestions here but to no avail. Is this a serious problem ? Thanks.

Error: Invalid Password when trying to sign in on any wireless devise

Error: Invalid Password when trying to sign in on any wireless devise
I even reinstalled my WRT110 to be sure of the Network Name and Password but I still get this error. I have never been able to log in to the wireless network. I can see it - Ienter my password and still "Invalid Password"

I don't understand this: Connect directly to the router. Is this the http://192.168.1.1?
I HAVE changed the network name, I HAVE changed the password.
I still get invalid password!!!
I am extremely frustrated by all this. I need simple instructions. I followed them when I set the friggin thing up, I reinstalled. I know what my friggin password is - why why why?

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

Fatal Error: missing resource: java.util.PropertyResourceBundle =Urgent

Hi all,
In the JSP ,if I include the statement <%@ page import="jack.samples.*" %>
it is throwing following error:
This is the Error Message from the Exception:
     Server caught unhandled exception from servlet [BaseServlet]: Server caught
     unhandled exception from servlet [CategoryDisplay]: Server caught unhandled
     exception from servlet [jsp]: Fatal Error: missing resource: java.util.PropertyResourceBundle
     I am using Websphere 3.5 on Windows NT.
     can somebody please help me what is going wrong here ???I am stopped at
     this problem for last 2 days.
Thanks
Jack

Hi,
Finally I was able to resolve after adding this jar file to the classfile
path of the application.
Now,I am trying to access use linkTable.add(new Item(222,"222","333",12.33)) in JSP.
where linkTable is a LinkedList.
It fails giving following error:
This is the Error Message from the Exception:
Server caught unhandled exception from servlet [BaseServlet]: Server caught unhandled exception from servlet : Server caught unhandled exception from servlet [jsp]: Compilation of "softproduct.jsp" failed: d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_2.java:824: No constructor matching Item(int, java.lang.String, java.lang.String, double) found in class jack.samples.Item. linkTab.add(new Item(2222,"222","222",22.33)); ^ Note: d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_2.java uses or overrides a deprecated API. Recompile with "-deprecation" for details. 1 error, 1 warning
I dont understand why it is failing to add Item object to LinkedList.
can somebody help me in the forum in this regard.
Thanks
Jack

Error: missing ] after element list Source File: javascript:%20[object%20XULElement] Line: 1, Column: 9 Source Code: [object XULElement]

Can you help me out in letting me know what this means and how I can fix this? I found it in my tools menu under error console. It was listed as a warning, but then there was a option to highlight and evaluate the original warning message that was listed as
Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped.
Source File: http://www.msn.com/
When I cut and pasted message in the code evaluate box and pressed enter the warring message became an error then stated:
Error: missing ; before statement
Source File: javascript:%20Warning:%20Expected%20color%20but%20found%20'null'.%20%20Error%20in%20parsing%20value%20for%20'background-color'.%20%20Declaration%20dropped.%20Source%20File:%20http://www.msn.com/%20Line:%200
Line: 1, Column: 10
Source Code:
Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped. Source File: http://www.msn.com/ Line: 0
I am writing to ask for guidance on what to do and how to fix this.
I current have Firefox as my default browser. I have IE 9 and Windows 7 home ed on my HP lap top that has AOL preloaded into it as the mail provider. I am a beginner user and when I got the computer my cousin set up Mozilla and Firefox as a search browser and I like it.
I also have norton security

I think, the problem is with the order (in configuration file) of path to search headers:
     /opt/oracle/product/10g/10.2.0/precomp/admin/pcscfg.cfg
          sys_include=(/usr/include,/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
          include
          include=(/usr/include)
          include=(/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
In the filesys:
     ./usr/include/sys:
     -r--r--r-- 1 bin bin 17786 Aug 13 2007 types.h
     ./opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include/sys:
     -rw-r--r-- 1 root system 18288 Mar 22 2008 types.h
     mode_t came from:
     #include <sys/types.h>
sys/types.h:
     * POSIX Extensions
     typedef unsigned int uint_t;
     typedef unsigned long ulong_t;
     * POSIX and XOPEN Declarations
     #if defined(_LP64) || defined(_I32LPx)
     typedef uint_t mode_t; /* file attribute type */
     #else
     typedef ulong_t mode_t; /* (historical version) */
     #endif

Photoshop v7.0 I get the error "missing or invalid personalization information" This used to run, I'm now on Windows 7 64 bit. Anyone have any ideas please? Thanks.

I get the error "missing or invalid personalization information" This used to run, I'm now on Windows 7 64 bit. Anyone have any ideas please? Thanks.

Hi,
If my memory serves me right (it’s some while since I changed and I have not used Photoshop for some years…) I was running it on XP. I upgraded to Win 7 on a new machine but ported across files, programmes etc. I cannot recall if Photoshop ever ran on Win 7.
I have tried to reinstall but the CD is warped and despite applying pressure to it neither of my drives likes it. I have Photoshop 7 on my third hard drive, a portable drive, which came from the XP machine.
Sorry, long-winded but I hope it helps.

Use of layout when more than one parameter - Error Missing Parameter Values

Hi,
Is it possible to use a crystal report which has more than one parameter as the layout for the bill of materials report.
I have 3 parameters
       1. DocKey@       The Bill of Materials to be printed
       2. Number of levels to be printed
       3. type of levels to print.
When I try to print it gives me the error Missing Parameter Values.
I have tried changing the DocKey@ to CodeKey@ but the same error.
Does anyone now where to find a list of these tokens?
Thanks
Chris

I looked at the crystal report conversion to try to find what parameters it used and found none.
I have managed to create and use a crystal report to replace the production order using DocKey@ as the parameter. This works within SAP. However I have converted the system production order to crystal reports and from the converted report I cannot see any parameters at all.
How and where can you find out what paramters you need to use to replace any PLD report? Several reports have multiple selection criteria before the report prints. How can you find out what their tokens are called? I am starting to pull my hair out. I am getting great help from this forum, but do you know any documentation which actually explains this area.
Thanks
Chris

Error Missing Parameter Values

I am very inexperinced in VB and ASP.Net.
That being said I have used forums and tutorials to develop the code below.
In the code I have hard coded some values to be passed to the report for testing...see num_inv and ser_inv.
When I run the code I get an error "Missing Parameter Values".
If I remove the lines that setparamervalues and turn on the enableparamaterpromt the report works fine and I can manually enter the values and see my completed report.
More Details...
The Crystal Report uses an ODBC connection to a SQL Server. I am only using one view to feed the report and there are no subreports. I am buidling the web app in VS2010 with the crystal reports version for VS2010 installed.
Dorry if I didn't give enough information...I don't know what else is relavant.
Any help would be greatly appreciated!
    Private Const PARAMETER_FIELD_NAME_1 As String = "Invoice"
    Private Const PARAMETER_FIELD_NAME_2 As String = "Serial"
    Private Sub WebForm2_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
        ConfigureCrystalReports()
    End Sub
    Private InvoiceReport As ReportDocument
Private Sub ConfigureCrystalReports()
        Dim num_inv As Integer
        Dim num_ser As Integer
        num_inv = 880822
        'Request.QueryString("inv")
        num_ser = 1
        'Request.QueryString("ser")
        InvoiceReport = New ReportDocument()
        Dim reportPath As String = Server.MapPath("S36 Invoice.rpt")
        InvoiceReport.Load(reportPath)
        InvoiceReport.SetParameterValue(PARAMETER_FIELD_NAME_1, num_inv)
        InvoiceReport.SetParameterValue(PARAMETER_FIELD_NAME_2, num_ser)
        CrystalReportViewer1.ReportSource = reportPath
    End Sub

I would start by enabling the parameter prompt and passing the parameters in code. You will only be prompted for the parameters that did not receive an acceptable value. This will let you see if your code to set the values is working for one or neither of your parameters. Calling the setparametervalues method will not return an error if the value isn't accepted.
Also, make sure your datatype is the same as defined in the report, and make sure you have no differences in the parameter names. Note, if the parameters are automatically created in the report because they came from a stored procedure, you need to include the @ symbol in the name as you see in the designer.

Error: Missing Parameter Values on

I've started experiencing the "Missing Parameter Values" error on a report containing a subreport. All of my other reports can export just fine, but just not the one with the subreport. The report (and the subreport) both use a stored procedure to retrieve their data, with 4 parameters. The first three parameters are linked directly from the report to the subreport. The 4th parameter is optional, and is linked to the subreport with a Formula Field.
When I delete the subreport, the report exports just fine, so the issue is definitely with the subreport ?configuration?
I'm using Visual Studio 2005, with Crystal Reports for VS 2005. I've been searching the forums, and I downloaded and installed a package: crnet20win32x86_en_chf.zip, but it didn't solve my problem. Just to be sure, I restarted and installed it with nothing running, in case that could be a factor.
Is there anything I can do to work through this? Any other fix I'm missing?
Thanks
Alex

Thanks for the tip. I did that just now, and I found the [Hot Fix|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313339333533393334%7D.do]
That particular Hot Fix describes my situation exactly, in that a report Stored Procedure parameter is "supposed" to be passed on to the Subreport. However, the Hot Fix describes prompting, which isn't occurring in my case, since I'm exporting the report entirely in code. My situation is just the error, Missing Parameter Values.
In any case, I've already run that entire Hot Fix package (twice), and I've found that I have 2 of the crpe32.dlls. Neither one is the version specified in the Hot Fix, (Version 10.2.0.1256). The second dll listed below seems to be of a version prior to the Hot Fix, I don't know if it could be the reason why it still doesn't work after applying the Hot Fix.
C:Program FilesCommon FilesBusiness Objects2.7Bin (Date 1/11/2007, version: 10.2.0.1624) and
C:Program FilesCommon FilesCrystal Decisions2.5Bin (Date 10/5/2005, version: 10.0.5.1177).
I've checked all the versions of references in my projects, and they all reference the 2.7 dlls, but I'd like to know if there is a way to replace the 2.5 version, just in case.
As far as the other search results, they hinted at things I've already tried. What else can I try?
Thanks,
Alex

Error Missing parameter values - I get this in 11g app server only

Hi.. I had an application in JSP-Struts, previously on 10g app server. I now migrated the code into 11g.
I get the error on CrystalViewer.jsp
Error
Missing parameter values
Steps that lead up to the error:
The very first time anyone enters the application and clicks a submit button on the jsp, after entering data and/or picking from drop menus, the error shows up on a separate page (thrown by crystalViewer.jsp)
When I get this error, and click the browsers back button, and simply click the submit button on the jsp screen again, the reports work fine (like they do in 10g).
Tried the following:
I used log4j and followed the data as it made its way from Struts to Crystal Factory. But once it gets out of Struts, and forwards to Crystal, I receive the error from the CrystalViewer.jsp
Next, I removed code in struts-action, that used crystal factory to 'set parameter', and didnt send any parameters, letting my crystal report bring back some random records.. And this works even the first submit! So the problem is only when I have to send parameters to crystsl
Additional info:
I do not send any null values across, since I read on these forums that folks were having issues with setting nulls etc... I check for null and then force 'All' in the parameter if the user does not enter data or pick from the drop-down.
I need help resolving this . Thanks and have a great day.
(Are there any changes to be made to the Struts config, or any additions to Web.xml? Should Crystal reports be changed in anyway so they can function like they did in 10g?)

The Crystal SDK doesn't know or care that you're using Struts.
The exception is stating you're not setting parameters.
So wherever you're trying to set parameters, whatever's reaching the viewer don't have them set.
Why not trace the workflow to see what's where?
Sincerely,
Ted Ueda

Error opening password file

Hi, I'm traying to start up a database in sqlplus on SuSE 8.2 and Ora9.2, I have the next error:
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup pfile=/opt/ora9/admin/pavilion/pfile/initmydb.ora
ORACLE instance started.
Total System Global Area 101781824 bytes
Fixed Size 450880 bytes
Variable Size 83886080 bytes
Database Buffers 16777216 bytes
Redo Buffers 667648 bytes
ORA-01990: error opening password file '/opt/ora9/product/9.2/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
My password file is /opt/ora9/product/9.2/dbs/orapwmydb
How can I use my orapwmydb file?

Hi Marco,
as far as I know, you have to use the REMOTE_LOGIN_PASSWORDFILE = SHARED option in your init...ora file.
In this case you have one password file for one or more databases. It can only have the entries for SYS and INTERAL.
I'm sorry to cannot answer your question of having different password files for different databases %-)
Klaus

[HELP] ORA-01990 Error opening password file '/home/oracle/OraHome1/dbs/ora

Dear All,
I have changed the PWD file on oracle 9.2.04 under linux redhat advance server 2.1. but when i start to open database by issuing dbstart, i get
ORA-01990: Error opening password file '/home/oracle/OraHome1/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2 : no such file or directory
additional information: 3
How to solve the problems?
thanks and regard
ER

Hai all...
I did it all..
but still I got
ORA-01990: Error opening password file '/home/oracle/OraHome1/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2 : no such file or directory
additional information: 3
Help me...
Thanks
regard
ER

OER 11.1.1.7 - Asset Navigator doesn't open with an Error - Missing Required permissions attribute in main jar

Hi,
I have installed OER-11g version 11.1.1.7 and am successfuly able to open Asset Editor , ImpExp utility and also could harvest SOA and OSB components.
Issue 1:
However while trying to open the Navigator of the harvested components in OER console, a new window opens with two sections ( top and bottom). The top one which is a diagram view doesn't open with an error - Missing required permissions attribute in main jar: http://localhost:7101/oer-web/applets/components.aler-thinkmapclient-11.1.1.7.0.jar.
Please find the screenshot below.
Issue #2 : While trying to browse for the Assets from OER console. The below error is seen ( missing permissions for components.jexplorer-11.1.1.7.0.jar)
Could someone direct me on how to solve this issue. Appreciate your help !
Thanks and regards,
Sridhar.

It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar

Error: Missing Password

Similar Messages

Maybe you are looking for