Error - MLB Boot ROM FFFE0000 Checksum failed
I managed to get hold of Apples testing software and ran some over night tests on my Mac Pro 2008 model.
I have the same 12 errors from 17 passes but haven't had a chance to examin the manual.
Does anyone know what the error means?
error - MLB Boot ROM FFFE0000 Checksum failed
Mac Pro EFI Firmware Update 1.3
http://netkas.org
Similar Messages
-
BBBOLD 9000 CONNECT TO BOOT ROM PROBLEM
Hi Everyone,
I tried to upgrade my BB Bold 9000 to 5.0, BUT WHEN CONNECTING TO BOOT ROM, THE BB FAILS AND REBOOTS, PLUS I CANT UPGRADE WITHOUT THE BATTERY IN THE BB. :-[ IM STUCK, PLEASE HELP ME!
I have attached the error message
error message gave me some option i tried that tooo but still the same problem.
Someone please help
Thank You
Apperciate.Are you able to upgrade via wi-fi? Have you done a patch upgrade before using the same Desktop Software/USB cable/PC? I have never seem this error so I'm trying to pinpoint were exactly the problem could be. I'm suspecting you might have had problems on your previous upgrade or you installed a corrupt application? I'll keep in touch.
Thank you for the question (I hope you have backed up all of your important information)
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed -
While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.
While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.
-
Error message when starting Boot Camp: 'You must update your computers Boot Rom'
I installed the latest firmware updated to my late 2011 13 inch MBP. Rom version is MBP81.0047.B24. Now Boot Camp won't start. Says I need to updated my boot rom. But its updated already. Anyone else having this issue? Thanks.
Fire the people that write meaningless message errors. Oh, can't. Get the point though.
you mean you are trying to use Boot Camp Assistant? Boot Camp has become meaningless through over use for too many things.
It doesn't even know bout your EFI frmware, I can say that.
You should though use Lion Boot Camp Assistant and the BC 4.01 drivers for your system.
Zap pram
repair your hard drive with Disk Utility - from DVD
make sure your free space is not fragmented, is contiguous and also large enough, 40 + 20GB for Windows, and still leave 20GB / 20% free for HFS.
And backup(s). -
Error: no boot disk has been detected or the disk has failed!(pavilion 20)
Error: no boot disk has been detected or the disk has failed!(pavilion 20-b014 . The machine came originally with windows 8. I upgraded to windows 8.1 and put new hard disk. So the hard disk is fine.
However if I turn the machine off for a day and start the next day I get the "Error: no boot disk has been detected or the disk has failed".
I made the hard disk the first to boot the machine will boot and works. Is there a way to upadate the BIOS on
HP pavilion 20-b014? my bios version is 12/4/2012 v.8.09.
I do not understand why the intermittment above error showing on and off.
Please help. ThanksHello @Samya,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer is giving you an error message stating that the boot disk could not be detected, and I would be happy to assist you in this matter!
To ensure that your hard drive you computer is trying to boot from is in working order, I recommend following the steps in this document on Testing for Hardware Failures (Windows 8). This should help determine if there is a fault with the hard drive.
If the hard drive passes all of the required tests, I recommend returning the BIOS back to its default settings by following this document on Recovering the BIOS.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
CD-ROM error on boot after replacing DVD drive -Qosmio F20-574
Ok so I have a Toshiba Qosmio F20/574 and I'm trying to replace the factory DVD drive (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD drive Im getting a CD-ROM error on boot. The only time I do not get it is when I boot with the factory DVD drive.
Here are the things I've tried...
-Cleared the CMOS
-Removed the bezel to make sure its plug all the way in
-used the EEPROM utility to set the drive to slave.
-tested the drive in another laptop
-unistalled the factory dvd drive through device manager and tried to boot with the new dvd drive
Here are the things I found weird...
- in the BIOS (ACP BIOS 1.30) under Device I/O it shows the Hard Drive and cd drive but its not listed by name, its showing only the IRQ of the master and secondary IDE controller (Built-in HDD Primary IDE (1F0H/IRQ14), CD-ROM Secondary IDE (170H/IRQ15)). This doesnt change, even if I boot without a DVD-Drive.
-There is no BIOS update available for this laptop. This is a Toshiba from Japan and Ive tried using Qosmio F20 BIOS 1.40 from another region but it doesnt work.
-I cant seem to find an update firmware for the Liteon DS-8A1P (CX17)
I cannot think of anything else to try. I really need help! Any ideas?Hello
your Liteon DS-8A1P (CX17) currently in SLAVE or CABLE SELECT Mode
you must make it as MASTER
Toshiba accepts drives in MASTER settings only
you can not make it by jumper , because there is no jumper inside the drive
you can make it master by:
1-firmware update to the drive to make it MASTER.
2-by soldring pin 47 to pin 45 inside the drive (not recomended). -
Please advice I am getting an error "Boot Camp Assistant cannot be used. You must update your computer's Boot ROM firmware before using this setup assistant."
No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.3 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 499.4 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
Also here is a system info
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.5 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these? -
Need Help how to address problem with undoing partition from BootCamp Assistant- receiving error message
"Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".
attempted solutions:
http://support.apple.com/kb/HT3964?viewlocale=en_en
http://support.apple.com/kb/HT1379?viewlocale=en_en
Mac HD is already MAc os Extended(journaled)
***problem still persists with above solutions.No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.3 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 499.4 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
Also here is a system info
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.5 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these? -
"ERROR: No boot disk has been detected or the disk has failed." On HP Envy 20
Hello - I have an ENVY 20 All-in-One PC and up until yesterday it was running fine. When I turned on my PC, a black screen appeared with the message: "ERROR: No boot disk has been detected or the disk has failed." I followed the directions on this post and ran a Hard Disk Test in BIOS. I've run both the Quick Check and the Extensive Check and both were passed. I'm not sure what to do now. Any solutions? Thanks,mgmartinelli
Mgmartinelli, welcome to the forum. It appears that you may be getting some conflicting information. The error message that you first received is normally attributed to a failed/ing hard drive. You may want to disconnect the drive and reconnect it to see if that helps. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
-
Webutil get error wut-115 checksum failed
We are trying to use the file upload function from the webutil package. We are trying to upload a simple text file into a blob failed and we get the following error wut-115 checksum failed. we have initialized the blob field to an empty blob but we still get the error. what causes this error to occurr and what is the best way to try to resolve the issue.
regards,
RobertDuncan:
we tried the package in the reverse direction and everything works fine. We are able to take a file stored in a blob column and download it to the client machine. However we still can not upload a file to a blob column in the database from a client machine. We tried this on multiple pc's. We have a webutil schema and in that schema we have the webutil_db package. this compiles fine. when we invoke our forms we log in as the webutil user. our webutil.cfg file is enabled true to allow database downloads. We are able to get every other functionality to work so far in the webutil package that we tried except for this one. Do you have any suggestions or would even take the time to direct connect in to see the problem?
Also we will need this package to work in the JVM environment currently we have webutil working using jinit. We do alot of work for the navy and army and JVM is the only allowed method we can use for our forms. I have heard that this package is not supported in the native JVM environment. This will hurt the prospects of many military and governmental applications due to them not allowing software installed on the client machine. After all that is why we are using java servlets and oracle over the web for them to access their application.
Regards,
Robert -
G580 Upgrade to Windows 10 failed in the SAFE_OS phase with an error during BOOT operation
0xC1900101-0x20017 I could not successfully upgrade from windows update, nor from the straight download site. The installation failed in the SAFE_OS phase with an error during BOOT operation. I see w10 bios updates for other models. Has anyone been successful in upgrading to W10 from W8?
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:21, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >:uspend(1066): Result = 0xC18001042015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteInstallMode(656): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::Execute(222): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupHost::Execute(370): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216
2015-07-31 21:36:36, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:36:40, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:37:02, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:03, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:11, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:15, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:18, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] -
When using CCC (Carbon Cophy Cloner) or Disk Utility to clone a Mac HD of one new iMac to another, over ThunderBolt, we are getting I/O errors. Even though the clone fails, the destination system does boot and log in, however, the logins take a very very very long time.
Thoughts.
Edit: Already ran Disk Utility. Also reinstalled a fresh OS on top of the cloned OS and it seemed to remedy the problem. Then, cloned to next machine in the row of the lab. Same problem.OK, by that I assume that you used Disk Utility to repair the subject disk and it reported "The volume (name) appears to be OK" in green.
Also verify you followed the instructions here: http://help.bombich.com/kb/usage-scenarios/i-want-to-clone-my-entire-hard-drive- to-a-new-hard-drive-or-a-new-machine
If so, the Thunderbolt connection begins to look suspicious.
Reinstalling OS X subsequent to the "clone" operation may be an acceptable workaround but you should not have had the I/O errors you describe, nor should the login times (subsequent to the initial login, that is) be unacceptably long. It calls into question the integrity of all the information that was transferrred.
I'll try to attract the attention of a CCC expert who will likely provide more competent assistance. You can also try the Bombich support site: http://help.bombich.com -
Terrible error with kerberos, win2003 - Checksum failed!
Now i'm trying to use CAS SSO with kerberos for authentication.
I done all settings by instruction, see this tutorial http://www.ja-sig.org/wiki/display/CASUM/SPNEGO.
So, the error is: Failure unspecified at GSS-API level (Mechanism level: Checksum failed).
I guess, there is a problem with encryption type, but i don't know how to resolve it. Please help
My stacktrace shown below:
Caused by: GSSException: Failure unspecified at GSS-API level (Mechanism level:
Checksum failed)
at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:
741)
at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java
:323)
at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java
:267)
... 75 more
Caused by: KrbException: Checksum failed
at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:85)
at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:77)
at sun.security.krb5.EncryptedData.decrypt(EncryptedData.java:168)
at sun.security.krb5.KrbApReq.authenticate(KrbApReq.java:267)
at sun.security.krb5.KrbApReq.<init>(KrbApReq.java:134)
at sun.security.jgss.krb5.InitSecContextToken.<init>(InitSecContextToken
.java:79)
at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:
724)
... 77 more
Caused by: java.security.GeneralSecurityException: Checksum failed
at sun.security.krb5.internal.crypto.dk.ArcFourCrypto.decrypt(ArcFourCry
pto.java:388)
at sun.security.krb5.internal.crypto.ArcFourHmac.decrypt(ArcFourHmac.jav
a:74)
at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:83)
... 83 moreThank you for advice, my friend.
I have analyzed info in TGS-REQ request, but i could not find any SPN in it.
Please see this screenshot and say me: where is needed SPN in ticket?
Here is my full configuration:
[logging]
[libdefaults]
ticket_lifetime = 24000
default_realm = MYCORP.KUBA
dns_lookup_kdc = true
dns_lookup_realm = true
default_tkt_enctypes = rc4-hmac des3-hmac-sha1 des-cbc-crc
default_tgs_enctypes = rc4-hmac des3-hmac-sha1 des-cbc-crc
[realms]
MYCORP.KUBA = {
kdc = mycorp.kuba:88
admin_server = mycorp.kuba:749
default_domain = mycorp.kuba
[domain_realm]
.mycorp.kuba = MYCORP.KUBA
mycorp.kuba = MYCORP.KUBA
[domain_realm]
.mycorp.kuba = MYCORP.KUBA
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
<bean class="org.jasig.cas.support.spnego.authentication.handler.support.JCIFSConfig"
p:jcifsDomainController="xxx"
p:jcifsNetbiosWins="xxx"
p:jcifsServicePrincipal="HTTP/MYUSER.mycorp.kuba"
p:jcifsServicePassword="secret"
p:useSubjectCredsOnly="true"
p:kerberosDebug="true"
p:kerberosRealm="MYCORP.KUBA"
p:kerberosKdc="xxx"
p:kerberosConf="c:/winnt/krb5.conf"
p:loginConf="C:/mypath/WEB-INF/login.conf"
/>
jcifs.spnego.initiate {
com.sun.security.auth.module.Krb5LoginModule
required
debug=true
realm="MYCORP.KUBA"
principal="HTTP/MYUSER.mycorp.kuba"
storeKey=true
doNotPrompt=false
client=true
refreshKrb5Config=true
storePass=true
isInitiator=false
useKeyTab=true
useTicketCache=false
keyTab="c:\a.keytab"
jcifs.spnego.accept {
com.sun.security.auth.module.Krb5LoginModule
required
debug=true
realm="MYCORP.KUBA"
principal="HTTP/MYUSER.mycorp.kuba"
storeKey=true
doNotPrompt=false
client=true
refreshKrb5Config=true
storePass=true
isInitiator=false
useKeyTab=true
useTicketCache=false
keyTab="c:\a.keytab"
setspn -A HTTP/MYUSER.mycorp.kuba myuser
ktpass -out a.keytab -princ HTTP/[email protected] -pass secret -mapuser [email protected] -ptype krb5_nt_principal -crypto RC4-HMAC-NTWhat is wrong with it? Please correct it if you can? -
Errors on boot - failed command: READ DMA
I've started to get failed command: READ DMA errors on boot. What do they mean? Is there any way to fix them?
[ 114.232991] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.233001] ata1.00: BMDMA stat 0x25
[ 114.233006] ata1.00: failed command: READ DMA
[ 114.233017] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 114.233022] ata1.00: status: { DRDY ERR }
[ 114.233026] ata1.00: error: { UNC }
[ 114.290536] ata1.00: configured for UDMA/133
[ 114.290566] sd 0:0:0:0: [sda] Unhandled sense code
[ 114.290573] sd 0:0:0:0: [sda]
[ 114.290577] Result: hostbyte=0x00 driverbyte=0x08
[ 114.290584] sd 0:0:0:0: [sda]
[ 114.290588] Sense Key : 0x3 [current] [descriptor]
[ 114.290596] Descriptor sense data with sense descriptors (in hex):
[ 114.290601] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 114.290624] 02 a6 57 02
[ 114.290636] sd 0:0:0:0: [sda]
[ 114.290640] ASC=0x11 ASCQ=0x4
[ 114.290647] sd 0:0:0:0: [sda] CDB:
[ 114.290651] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 114.290671] end_request: I/O error, dev sda, sector 44455682
[ 114.290700] ata1: EH complete
[ 115.677517] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.677529] ata1.00: BMDMA stat 0x25
[ 115.677538] ata1.00: failed command: READ DMA
[ 115.677555] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 115.677565] ata1.00: status: { DRDY ERR }
[ 115.677570] ata1.00: error: { UNC }
[ 115.713838] ata1.00: configured for UDMA/133
[ 115.713870] sd 0:0:0:0: [sda] Unhandled sense code
[ 115.713877] sd 0:0:0:0: [sda]
[ 115.713882] Result: hostbyte=0x00 driverbyte=0x08
[ 115.713889] sd 0:0:0:0: [sda]
[ 115.713893] Sense Key : 0x3 [current] [descriptor]
[ 115.713901] Descriptor sense data with sense descriptors (in hex):
[ 115.713905] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 115.713929] 02 a6 57 02
[ 115.713940] sd 0:0:0:0: [sda]
[ 115.713945] ASC=0x11 ASCQ=0x4
[ 115.713951] sd 0:0:0:0: [sda] CDB:
[ 115.713956] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 115.713976] end_request: I/O error, dev sda, sector 44455682
[ 115.714006] ata1: EH complete
[ 117.055388] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.055400] ata1.00: BMDMA stat 0x25
[ 117.055409] ata1.00: failed command: READ DMA
[ 117.055427] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 117.055436] ata1.00: status: { DRDY ERR }
[ 117.055442] ata1.00: error: { UNC }
[ 117.090462] ata1.00: configured for UDMA/133
[ 117.090494] sd 0:0:0:0: [sda] Unhandled sense code
[ 117.090501] sd 0:0:0:0: [sda]
[ 117.090506] Result: hostbyte=0x00 driverbyte=0x08
[ 117.090512] sd 0:0:0:0: [sda]
[ 117.090516] Sense Key : 0x3 [current] [descriptor]
[ 117.090524] Descriptor sense data with sense descriptors (in hex):
[ 117.090529] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 117.090552] 02 a6 57 02
[ 117.090564] sd 0:0:0:0: [sda]
[ 117.090568] ASC=0x11 ASCQ=0x4
[ 117.090575] sd 0:0:0:0: [sda] CDB:
[ 117.090579] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 117.090599] end_request: I/O error, dev sda, sector 44455682
[ 117.090648] ata1: EH complete
[ 118.344345] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.344356] ata1.00: BMDMA stat 0x25
[ 118.344365] ata1.00: failed command: READ DMA
[ 118.344382] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 118.344391] ata1.00: status: { DRDY ERR }
[ 118.344397] ata1.00: error: { UNC }
[ 118.427170] ata1.00: configured for UDMA/133
[ 118.427198] sd 0:0:0:0: [sda] Unhandled sense code
[ 118.427240] sd 0:0:0:0: [sda]
[ 118.427246] Result: hostbyte=0x00 driverbyte=0x08
[ 118.427252] sd 0:0:0:0: [sda]
[ 118.427257] Sense Key : 0x3 [current] [descriptor]
[ 118.427265] Descriptor sense data with sense descriptors (in hex):
[ 118.427269] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 118.427293] 02 a6 57 02
[ 118.427304] sd 0:0:0:0: [sda]
[ 118.427309] ASC=0x11 ASCQ=0x4
[ 118.427315] sd 0:0:0:0: [sda] CDB:
[ 118.427320] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 118.427340] end_request: I/O error, dev sda, sector 44455682
[ 118.430078] ata1: EH complete
[ 725.193320] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
Here's some info about the hard drive itself:
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG HM040HI
Serial Number: S07WJ10Y711599
Firmware Revision: YA100-02
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78242976
LBA48 user addressable sectors: 78242976
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 38204 MBytes
device size with M = 1000*1000: 40060 MBytes (40 GB)
cache/buffer size = 8192 KBytes (type=DualPortCache)
Last edited by β ™ (2014-01-14 10:31:39)I've started to get failed command: READ DMA errors on boot. What do they mean? Is there any way to fix them?
[ 114.232991] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.233001] ata1.00: BMDMA stat 0x25
[ 114.233006] ata1.00: failed command: READ DMA
[ 114.233017] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 114.233022] ata1.00: status: { DRDY ERR }
[ 114.233026] ata1.00: error: { UNC }
[ 114.290536] ata1.00: configured for UDMA/133
[ 114.290566] sd 0:0:0:0: [sda] Unhandled sense code
[ 114.290573] sd 0:0:0:0: [sda]
[ 114.290577] Result: hostbyte=0x00 driverbyte=0x08
[ 114.290584] sd 0:0:0:0: [sda]
[ 114.290588] Sense Key : 0x3 [current] [descriptor]
[ 114.290596] Descriptor sense data with sense descriptors (in hex):
[ 114.290601] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 114.290624] 02 a6 57 02
[ 114.290636] sd 0:0:0:0: [sda]
[ 114.290640] ASC=0x11 ASCQ=0x4
[ 114.290647] sd 0:0:0:0: [sda] CDB:
[ 114.290651] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 114.290671] end_request: I/O error, dev sda, sector 44455682
[ 114.290700] ata1: EH complete
[ 115.677517] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.677529] ata1.00: BMDMA stat 0x25
[ 115.677538] ata1.00: failed command: READ DMA
[ 115.677555] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 115.677565] ata1.00: status: { DRDY ERR }
[ 115.677570] ata1.00: error: { UNC }
[ 115.713838] ata1.00: configured for UDMA/133
[ 115.713870] sd 0:0:0:0: [sda] Unhandled sense code
[ 115.713877] sd 0:0:0:0: [sda]
[ 115.713882] Result: hostbyte=0x00 driverbyte=0x08
[ 115.713889] sd 0:0:0:0: [sda]
[ 115.713893] Sense Key : 0x3 [current] [descriptor]
[ 115.713901] Descriptor sense data with sense descriptors (in hex):
[ 115.713905] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 115.713929] 02 a6 57 02
[ 115.713940] sd 0:0:0:0: [sda]
[ 115.713945] ASC=0x11 ASCQ=0x4
[ 115.713951] sd 0:0:0:0: [sda] CDB:
[ 115.713956] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 115.713976] end_request: I/O error, dev sda, sector 44455682
[ 115.714006] ata1: EH complete
[ 117.055388] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.055400] ata1.00: BMDMA stat 0x25
[ 117.055409] ata1.00: failed command: READ DMA
[ 117.055427] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 117.055436] ata1.00: status: { DRDY ERR }
[ 117.055442] ata1.00: error: { UNC }
[ 117.090462] ata1.00: configured for UDMA/133
[ 117.090494] sd 0:0:0:0: [sda] Unhandled sense code
[ 117.090501] sd 0:0:0:0: [sda]
[ 117.090506] Result: hostbyte=0x00 driverbyte=0x08
[ 117.090512] sd 0:0:0:0: [sda]
[ 117.090516] Sense Key : 0x3 [current] [descriptor]
[ 117.090524] Descriptor sense data with sense descriptors (in hex):
[ 117.090529] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 117.090552] 02 a6 57 02
[ 117.090564] sd 0:0:0:0: [sda]
[ 117.090568] ASC=0x11 ASCQ=0x4
[ 117.090575] sd 0:0:0:0: [sda] CDB:
[ 117.090579] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 117.090599] end_request: I/O error, dev sda, sector 44455682
[ 117.090648] ata1: EH complete
[ 118.344345] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.344356] ata1.00: BMDMA stat 0x25
[ 118.344365] ata1.00: failed command: READ DMA
[ 118.344382] ata1.00: cmd c8/00:08:00:57:a6/00:00:00:00:00/e2 tag 0 dma 4096 in
res 51/40:07:02:57:a6/00:00:00:00:00/e2 Emask 0x9 (media error)
[ 118.344391] ata1.00: status: { DRDY ERR }
[ 118.344397] ata1.00: error: { UNC }
[ 118.427170] ata1.00: configured for UDMA/133
[ 118.427198] sd 0:0:0:0: [sda] Unhandled sense code
[ 118.427240] sd 0:0:0:0: [sda]
[ 118.427246] Result: hostbyte=0x00 driverbyte=0x08
[ 118.427252] sd 0:0:0:0: [sda]
[ 118.427257] Sense Key : 0x3 [current] [descriptor]
[ 118.427265] Descriptor sense data with sense descriptors (in hex):
[ 118.427269] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 118.427293] 02 a6 57 02
[ 118.427304] sd 0:0:0:0: [sda]
[ 118.427309] ASC=0x11 ASCQ=0x4
[ 118.427315] sd 0:0:0:0: [sda] CDB:
[ 118.427320] cdb[0]=0x28: 28 00 02 a6 57 00 00 00 08 00
[ 118.427340] end_request: I/O error, dev sda, sector 44455682
[ 118.430078] ata1: EH complete
[ 725.193320] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
Here's some info about the hard drive itself:
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG HM040HI
Serial Number: S07WJ10Y711599
Firmware Revision: YA100-02
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78242976
LBA48 user addressable sectors: 78242976
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 38204 MBytes
device size with M = 1000*1000: 40060 MBytes (40 GB)
cache/buffer size = 8192 KBytes (type=DualPortCache)
Last edited by β ™ (2014-01-14 10:31:39) -
I should preface this with I'm not a Linux noob, but I am no expert either (I get by). Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot. Never could quite see exactly what they were so today I logged dmesg to a text file. I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system. After the errors show the system continues to boot to Openbox. I was hope someone could tell me what the errors are and how to not get them anymore. I have posted the dmesg log below, thanks in advanced for any help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
[ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
[ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048446
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2700.249 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
[ 0.013342] pid_max: default: 32768 minimum: 301
[ 0.013386] Security Framework initialized
[ 0.013395] AppArmor: AppArmor disabled by boot time parameter
[ 0.013396] Yama: becoming mindful.
[ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017157] Mount-cache hash table entries: 256
[ 0.017396] Initializing cgroup subsys memory
[ 0.017414] Initializing cgroup subsys devices
[ 0.017417] Initializing cgroup subsys freezer
[ 0.017418] Initializing cgroup subsys net_cls
[ 0.017420] Initializing cgroup subsys blkio
[ 0.017442] tseg: 0000000000
[ 0.017449] CPU: Physical Processor ID: 0
[ 0.017450] CPU: Processor Core ID: 0
[ 0.017452] mce: CPU supports 5 MCE banks
[ 0.017458] LVT offset 0 assigned for vector 0xf9
[ 0.017462] process: using AMD E400 aware idle routine
[ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.018244] ACPI: Core revision 20130725
[ 0.021196] ACPI: All ACPI Tables successfully acquired
[ 0.023362] ftrace: allocating 20290 entries in 80 pages
[ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
[ 0.069999] Performance Events: AMD PMU driver.
[ 0.069999] ... version: 0
[ 0.069999] ... bit width: 48
[ 0.069999] ... generic registers: 4
[ 0.069999] ... value mask: 0000ffffffffffff
[ 0.069999] ... max period: 00007fffffffffff
[ 0.069999] ... fixed-purpose events: 0
[ 0.069999] ... event mask: 000000000000000f
[ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
[ 0.183403] Brought up 2 CPUs
[ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
[ 0.183927] devtmpfs: initialized
[ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
[ 0.188111] RTC time: 8:27:34, date: 12/02/13
[ 0.188111] NET: Registered protocol family 16
[ 0.188127] cpuidle: using governor ladder
[ 0.188128] cpuidle: using governor menu
[ 0.188133] node 0 link 0: io port [b000, ffff]
[ 0.188135] TOM: 00000000c0000000 aka 3072M
[ 0.188137] node 0 link 0: mmio [a0000, bffff]
[ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
[ 0.188145] TOM2: 0000000140000000 aka 5120M
[ 0.188148] bus: [bus 00-04] on node 0 link 0
[ 0.188149] bus: 00 [io 0x0000-0xffff]
[ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.188168] ACPI: bus type PCI registered
[ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.199259] PCI: Using configuration type 1 for base access
[ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
[ 0.199435] mtrr: corrected configuration.
[ 0.200005] bio: create slab <bio-0> at 0
[ 0.200048] ACPI: Added _OSI(Module Device)
[ 0.200050] ACPI: Added _OSI(Processor Device)
[ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200693] ACPI: EC: Look up EC in DSDT
[ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204741] ACPI: Interpreter enabled
[ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
[ 0.204770] ACPI: (supports S0 S1 S4 S5)
[ 0.204771] ACPI: Using IOAPIC for interrupt routing
[ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204933] ACPI: No dock devices found.
[ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
[ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.218058] PCI host bridge to bus 0000:00
[ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
[ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
[ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.219665] pci 0000:00:13.5: supports D1 D2
[ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
[ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
[ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
[ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226865] pci 0000:02:00.0: supports D1 D2
[ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
[ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
[ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
[ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.235177] Found 1 acpi root devices
[ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235262] vgaarb: loaded
[ 0.235262] vgaarb: bridge control possible 0000:01:00.0
[ 0.235262] PCI: Using ACPI for IRQ routing
[ 0.244778] PCI: pci_cache_line_size set to 64 bytes
[ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
[ 0.244956] NetLabel: Initializing
[ 0.244957] NetLabel: domain hash size = 128
[ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244971] NetLabel: unlabeled traffic allowed by default
[ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.246697] Switched to clocksource hpet
[ 0.251917] pnp: PnP ACPI init
[ 0.251938] ACPI: bus type PNP registered
[ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.252201] system 00:00: [io 0x040b] has been reserved
[ 0.252204] system 00:00: [io 0x04d6] has been reserved
[ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.252209] system 00:00: [io 0x0c14] has been reserved
[ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.252216] system 00:00: [io 0x0c6f] has been reserved
[ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252336] pnp 00:01: [dma 4]
[ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
[ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252767] pnp 00:07: [dma 2]
[ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
[ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
[ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253938] pnp: PnP ACPI: found 13 devices
[ 0.253939] ACPI: bus type PNP unregistered
[ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261266] NET: Registered protocol family 2
[ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.262046] TCP: reno registered
[ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262209] NET: Registered protocol family 1
[ 0.616902] pci 0000:01:00.0: Boot video device
[ 0.616913] PCI: CLS 32 bytes, default 64
[ 0.616966] Unpacking initramfs...
[ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
[ 0.677630] PCI-DMA: Disabling AGP.
[ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.677712] PCI-DMA: using GART IOMMU.
[ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.682349] Scanning for low memory corruption every 60 seconds
[ 0.682695] audit: initializing netlink socket (disabled)
[ 0.682709] type=2000 audit(1385972853.679:1): initialized
[ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.695128] zbud: loaded
[ 0.695281] VFS: Disk quotas dquot_6.5.2
[ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.695554] msgmni has been set to 7910
[ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.695993] io scheduler noop registered
[ 0.695995] io scheduler deadline registered
[ 0.696025] io scheduler cfq registered (default)
[ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.696445] vesafb: scrolling: redraw
[ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
[ 0.702849] Console: switching to colour frame buffer device 80x30
[ 0.709096] fb0: VESA VGA frame buffer device
[ 0.709135] GHES: HEST is not enabled!
[ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.750958] Linux agpgart interface v0.103
[ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.751860] mousedev: PS/2 mouse device common for all mice
[ 0.751927] rtc_cmos 00:03: RTC can wake from S4
[ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.752187] drop_monitor: Initializing network drop monitor service
[ 0.752254] TCP: cubic registered
[ 0.752361] NET: Registered protocol family 10
[ 0.752553] NET: Registered protocol family 17
[ 0.752565] Key type dns_resolver registered
[ 0.752847] registered taskstats version 1
[ 0.753423] Magic number: 9:957:471
[ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
[ 0.753559] PM: Hibernation image not present or could not be loaded.
[ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.755072] Write protecting the kernel read-only data: 8192k
[ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
[ 0.769771] systemd-udevd[47]: starting version 208
[ 0.794492] Floppy drive(s): fd0 is 1.44M
[ 0.803163] ACPI: bus type USB registered
[ 0.803196] usbcore: registered new interface driver usbfs
[ 0.803207] usbcore: registered new interface driver hub
[ 0.804032] usbcore: registered new device driver usb
[ 0.804145] SCSI subsystem initialized
[ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.805956] ohci-pci: OHCI PCI platform driver
[ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 0.808453] ehci-pci: EHCI PCI platform driver
[ 0.810692] FDC 0 is a post-1991 82077
[ 0.810859] libata version 3.00 loaded.
[ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.812133] scsi0 : pata_jmicron
[ 0.812212] scsi1 : pata_jmicron
[ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.860877] hub 1-0:1.0: USB hub found
[ 0.860890] hub 1-0:1.0: 2 ports detected
[ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 0.917507] hub 2-0:1.0: USB hub found
[ 0.917518] hub 2-0:1.0: 2 ports detected
[ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 0.974160] hub 3-0:1.0: USB hub found
[ 0.974171] hub 3-0:1.0: 2 ports detected
[ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.030833] hub 4-0:1.0: USB hub found
[ 1.030843] hub 4-0:1.0: 2 ports detected
[ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.087499] hub 5-0:1.0: USB hub found
[ 1.087509] hub 5-0:1.0: 2 ports detected
[ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
[ 1.643840] usb 1-1: USB disconnect, device number 2
[ 1.644033] usb 1-2: USB disconnect, device number 3
[ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.760313] ehci-pci 0000:00:13.5: debug port 1
[ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.770182] hub 6-0:1.0: USB hub found
[ 1.770191] hub 6-0:1.0: 10 ports detected
[ 1.826731] hub 1-0:1.0: USB hub found
[ 1.826742] hub 1-0:1.0: 2 ports detected
[ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.828580] usbcore: registered new interface driver usbhid
[ 1.828583] usbhid: USB HID core driver
[ 1.883417] hub 2-0:1.0: USB hub found
[ 1.883431] hub 2-0:1.0: 2 ports detected
[ 1.940057] hub 3-0:1.0: USB hub found
[ 1.940067] hub 3-0:1.0: 2 ports detected
[ 1.996722] hub 4-0:1.0: USB hub found
[ 1.996732] hub 4-0:1.0: 2 ports detected
[ 2.053388] hub 5-0:1.0: USB hub found
[ 2.053398] hub 5-0:1.0: 2 ports detected
[ 2.053683] ahci 0000:00:12.0: version 3.0
[ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 2.054699] scsi2 : ahci
[ 2.054775] scsi3 : ahci
[ 2.054850] scsi4 : ahci
[ 2.054920] scsi5 : ahci
[ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.056192] scsi6 : pata_atiixp
[ 2.056251] scsi7 : pata_atiixp
[ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.067129] scsi8 : ahci
[ 2.067200] scsi9 : ahci
[ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
[ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
[ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
[ 2.227109] ata7.00: configured for UDMA/33
[ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.540027] ata3: softreset failed (device not ready)
[ 2.540185] ata3: applying PMP SRST workaround and retrying
[ 2.540217] ata5: softreset failed (device not ready)
[ 2.540381] ata5: applying PMP SRST workaround and retrying
[ 2.540408] ata4: softreset failed (device not ready)
[ 2.540563] ata4: applying PMP SRST workaround and retrying
[ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
[ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708445] ata3.00: configured for UDMA/133
[ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.709436] ata4.00: configured for UDMA/133
[ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
[ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
[ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.716937] sdb: sdb1
[ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.719683] ata5.00: configured for UDMA/133
[ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
[ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
[ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
[ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 2.728116] ata5.00: status: { DRDY }
[ 2.728231] ata5: hard resetting link
[ 2.736521] sda: sda1 sda2 < sda5 >
[ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
[ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
[ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
[ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
[ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
[ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
[ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
[ 3.213356] ata5: softreset failed (device not ready)
[ 3.213519] ata5: applying PMP SRST workaround and retrying
[ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 3.392798] ata5.00: revalidation failed (errno=-5)
[ 8.380028] ata5: hard resetting link
[ 8.866697] ata5: softreset failed (device not ready)
[ 8.866861] ata5: applying PMP SRST workaround and retrying
[ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046260] ata5.00: configured for UDMA/133
[ 9.046276] ata5: EH complete
[ 9.052053] sdc: sdc1
[ 9.052397] sdc: detected capacity change from 0 to 1000204886016
[ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
[ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
[ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 9.103442] ata5.00: status: { DRDY }
[ 9.103556] ata5: hard resetting link
[ 9.590022] ata5: softreset failed (device not ready)
[ 9.590182] ata5: applying PMP SRST workaround and retrying
[ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 9.769458] ata5.00: revalidation failed (errno=-5)
[ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.756687] ata5: hard resetting link
[ 15.243350] ata5: softreset failed (device not ready)
[ 15.247493] ata5: applying PMP SRST workaround and retrying
[ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426255] ata5.00: configured for UDMA/133
[ 15.426271] ata5: EH complete
[ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
[ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
[ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 15.497016] ata5.00: status: { DRDY }
[ 15.501349] ata5: hard resetting link
[ 15.986684] ata5: softreset failed (device not ready)
[ 15.990999] ata5: applying PMP SRST workaround and retrying
[ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169560] ata5.00: configured for UDMA/133
[ 16.169567] ata5: EH complete
[ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
[ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
[ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
[ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
[ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.270799] ata5.00: status: { DRDY }
[ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
[ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.297504] ata5.00: status: { DRDY }
[ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
[ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.324306] ata5.00: status: { DRDY }
[ 16.328707] ata5: hard resetting link
[ 16.813352] ata5: softreset failed (device not ready)
[ 16.817758] ata5: applying PMP SRST workaround and retrying
[ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996263] ata5.00: configured for UDMA/133
[ 16.996279] ata5: EH complete
[ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
[ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 18.110443] systemd[1]: Starting Remote File Systems.
[ 18.110456] systemd[1]: Reached target Remote File Systems.
[ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
[ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
[ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
[ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.110638] systemd[1]: Starting Encrypted Volumes.
[ 18.110651] systemd[1]: Reached target Encrypted Volumes.
[ 18.110664] systemd[1]: Starting Journal Socket.
[ 18.110711] systemd[1]: Listening on Journal Socket.
[ 18.110728] systemd[1]: Starting Setup Virtual Console...
[ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.139007] systemd[1]: Mounting Huge Pages File System...
[ 18.139550] systemd[1]: Starting Journal Service...
[ 18.140217] systemd[1]: Started Journal Service.
[ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
[ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 18.806623] systemd-udevd[155]: starting version 208
[ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 19.331559] ACPI: Power Button [PWRB]
[ 19.331882] ACPI: Fan [FAN] (on)
[ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
[ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.337764] ACPI: Power Button [PWRF]
[ 19.337878] ACPI: Invalid passive threshold
[ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
[ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.388553] wmi: Mapper loaded
[ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
[ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
[ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.717185] MCE: In-kernel MCE decoding enabled.
[ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.780737] [drm] Initialized drm 1.1.0 20060810
[ 19.801750] EDAC MC: Ver: 3.0.0
[ 19.808239] sky2: driver version 1.30
[ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
[ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
[ 19.870517] AMD64 EDAC driver v3.4.0
[ 19.895226] microcode: AMD CPU family 0xf not supported
[ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
[ 20.021077] kvm: Nested Virtualization enabled
[ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
[ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 20.100569] Console: switching to colour dummy device 80x25
[ 20.101154] [drm] hdmi device not found 1 0 1
[ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
[ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.158048] sp5100_tco: PCI Revision ID: 0x13
[ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
[ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
[ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
[ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
[ 20.204615] [TTM] Initializing pool allocator
[ 20.204619] [TTM] Initializing DMA pool allocator
[ 20.204630] nouveau [ DRM] VRAM: 512 MiB
[ 20.204632] nouveau [ DRM] GART: 1048576 MiB
[ 20.204636] nouveau [ DRM] TMDS table version 2.0
[ 20.204638] nouveau [ DRM] DCB version 4.0
[ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
[ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
[ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
[ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 20.204652] nouveau [ DRM] DCB conn 00: 2030
[ 20.204655] nouveau [ DRM] DCB conn 01: 1130
[ 20.204657] nouveau [ DRM] DCB conn 02: 0210
[ 20.204659] nouveau [ DRM] DCB conn 03: 0211
[ 20.204660] nouveau [ DRM] DCB conn 04: 0213
[ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
[ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.210897] [drm] No driver support for vblank timestamp query.
[ 20.211027] nouveau [ DRM] 1 available performance level(s)
[ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
[ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
[ 20.214375] ppdev: user-space parallel port driver
[ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
[ 20.288622] EDAC amd64: DRAM ECC disabled.
[ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 20.288675] fbcon: nouveaufb (fb0) is primary device
[ 20.376049] Console: switching to colour frame buffer device 128x48
[ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 20.376340] nouveau 0000:01:00.0: registered panic notifier
[ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
[ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
[ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
[ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 102.400046] ata4.00: status: { DRDY }
[ 102.400051] ata4: hard resetting link
[ 102.933349] ata4: softreset failed (device not ready)
[ 102.933356] ata4: applying PMP SRST workaround and retrying
[ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102326] ata4.00: configured for UDMA/133
[ 103.102330] ata4.00: device reported invalid CHS sector 0
[ 103.102340] sd 3:0:0:0: [sdb]
[ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
[ 103.102344] sd 3:0:0:0: [sdb]
[ 103.102345] Sense Key : 0xb [current] [descriptor]
[ 103.102348] Descriptor sense data with sense descriptors (in hex):
[ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 103.102355] 00 00 00 00
[ 103.102358] sd 3:0:0:0: [sdb]
[ 103.102359] ASC=0x0 ASCQ=0x0
[ 103.102361] sd 3:0:0:0: [sdb] CDB:
[ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
[ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
[ 103.102415] ata4: EH complete
[ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
[ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
[ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386714] ata4.00: status: { DRDY }
[ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386723] ata4.00: status: { DRDY }
[ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386731] ata4.00: status: { DRDY }
[ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386740] ata4.00: status: { DRDY }
[ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386748] ata4.00: status: { DRDY }
[ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386757] ata4.00: status: { DRDY }
[ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:I should preface this with I'm not a Linux noob, but I am no expert either (I get by). Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot. Never could quite see exactly what they were so today I logged dmesg to a text file. I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system. After the errors show the system continues to boot to Openbox. I was hope someone could tell me what the errors are and how to not get them anymore. I have posted the dmesg log below, thanks in advanced for any help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
[ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
[ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048446
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2700.249 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
[ 0.013342] pid_max: default: 32768 minimum: 301
[ 0.013386] Security Framework initialized
[ 0.013395] AppArmor: AppArmor disabled by boot time parameter
[ 0.013396] Yama: becoming mindful.
[ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017157] Mount-cache hash table entries: 256
[ 0.017396] Initializing cgroup subsys memory
[ 0.017414] Initializing cgroup subsys devices
[ 0.017417] Initializing cgroup subsys freezer
[ 0.017418] Initializing cgroup subsys net_cls
[ 0.017420] Initializing cgroup subsys blkio
[ 0.017442] tseg: 0000000000
[ 0.017449] CPU: Physical Processor ID: 0
[ 0.017450] CPU: Processor Core ID: 0
[ 0.017452] mce: CPU supports 5 MCE banks
[ 0.017458] LVT offset 0 assigned for vector 0xf9
[ 0.017462] process: using AMD E400 aware idle routine
[ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.018244] ACPI: Core revision 20130725
[ 0.021196] ACPI: All ACPI Tables successfully acquired
[ 0.023362] ftrace: allocating 20290 entries in 80 pages
[ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
[ 0.069999] Performance Events: AMD PMU driver.
[ 0.069999] ... version: 0
[ 0.069999] ... bit width: 48
[ 0.069999] ... generic registers: 4
[ 0.069999] ... value mask: 0000ffffffffffff
[ 0.069999] ... max period: 00007fffffffffff
[ 0.069999] ... fixed-purpose events: 0
[ 0.069999] ... event mask: 000000000000000f
[ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
[ 0.183403] Brought up 2 CPUs
[ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
[ 0.183927] devtmpfs: initialized
[ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
[ 0.188111] RTC time: 8:27:34, date: 12/02/13
[ 0.188111] NET: Registered protocol family 16
[ 0.188127] cpuidle: using governor ladder
[ 0.188128] cpuidle: using governor menu
[ 0.188133] node 0 link 0: io port [b000, ffff]
[ 0.188135] TOM: 00000000c0000000 aka 3072M
[ 0.188137] node 0 link 0: mmio [a0000, bffff]
[ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
[ 0.188145] TOM2: 0000000140000000 aka 5120M
[ 0.188148] bus: [bus 00-04] on node 0 link 0
[ 0.188149] bus: 00 [io 0x0000-0xffff]
[ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.188168] ACPI: bus type PCI registered
[ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.199259] PCI: Using configuration type 1 for base access
[ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
[ 0.199435] mtrr: corrected configuration.
[ 0.200005] bio: create slab <bio-0> at 0
[ 0.200048] ACPI: Added _OSI(Module Device)
[ 0.200050] ACPI: Added _OSI(Processor Device)
[ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200693] ACPI: EC: Look up EC in DSDT
[ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204741] ACPI: Interpreter enabled
[ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
[ 0.204770] ACPI: (supports S0 S1 S4 S5)
[ 0.204771] ACPI: Using IOAPIC for interrupt routing
[ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204933] ACPI: No dock devices found.
[ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
[ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.218058] PCI host bridge to bus 0000:00
[ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
[ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
[ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.219665] pci 0000:00:13.5: supports D1 D2
[ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
[ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
[ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
[ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226865] pci 0000:02:00.0: supports D1 D2
[ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
[ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
[ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
[ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.235177] Found 1 acpi root devices
[ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235262] vgaarb: loaded
[ 0.235262] vgaarb: bridge control possible 0000:01:00.0
[ 0.235262] PCI: Using ACPI for IRQ routing
[ 0.244778] PCI: pci_cache_line_size set to 64 bytes
[ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
[ 0.244956] NetLabel: Initializing
[ 0.244957] NetLabel: domain hash size = 128
[ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244971] NetLabel: unlabeled traffic allowed by default
[ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.246697] Switched to clocksource hpet
[ 0.251917] pnp: PnP ACPI init
[ 0.251938] ACPI: bus type PNP registered
[ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.252201] system 00:00: [io 0x040b] has been reserved
[ 0.252204] system 00:00: [io 0x04d6] has been reserved
[ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.252209] system 00:00: [io 0x0c14] has been reserved
[ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.252216] system 00:00: [io 0x0c6f] has been reserved
[ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252336] pnp 00:01: [dma 4]
[ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
[ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252767] pnp 00:07: [dma 2]
[ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
[ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
[ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253938] pnp: PnP ACPI: found 13 devices
[ 0.253939] ACPI: bus type PNP unregistered
[ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261266] NET: Registered protocol family 2
[ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.262046] TCP: reno registered
[ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262209] NET: Registered protocol family 1
[ 0.616902] pci 0000:01:00.0: Boot video device
[ 0.616913] PCI: CLS 32 bytes, default 64
[ 0.616966] Unpacking initramfs...
[ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
[ 0.677630] PCI-DMA: Disabling AGP.
[ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.677712] PCI-DMA: using GART IOMMU.
[ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.682349] Scanning for low memory corruption every 60 seconds
[ 0.682695] audit: initializing netlink socket (disabled)
[ 0.682709] type=2000 audit(1385972853.679:1): initialized
[ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.695128] zbud: loaded
[ 0.695281] VFS: Disk quotas dquot_6.5.2
[ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.695554] msgmni has been set to 7910
[ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.695993] io scheduler noop registered
[ 0.695995] io scheduler deadline registered
[ 0.696025] io scheduler cfq registered (default)
[ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.696445] vesafb: scrolling: redraw
[ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
[ 0.702849] Console: switching to colour frame buffer device 80x30
[ 0.709096] fb0: VESA VGA frame buffer device
[ 0.709135] GHES: HEST is not enabled!
[ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.750958] Linux agpgart interface v0.103
[ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.751860] mousedev: PS/2 mouse device common for all mice
[ 0.751927] rtc_cmos 00:03: RTC can wake from S4
[ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.752187] drop_monitor: Initializing network drop monitor service
[ 0.752254] TCP: cubic registered
[ 0.752361] NET: Registered protocol family 10
[ 0.752553] NET: Registered protocol family 17
[ 0.752565] Key type dns_resolver registered
[ 0.752847] registered taskstats version 1
[ 0.753423] Magic number: 9:957:471
[ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
[ 0.753559] PM: Hibernation image not present or could not be loaded.
[ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.755072] Write protecting the kernel read-only data: 8192k
[ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
[ 0.769771] systemd-udevd[47]: starting version 208
[ 0.794492] Floppy drive(s): fd0 is 1.44M
[ 0.803163] ACPI: bus type USB registered
[ 0.803196] usbcore: registered new interface driver usbfs
[ 0.803207] usbcore: registered new interface driver hub
[ 0.804032] usbcore: registered new device driver usb
[ 0.804145] SCSI subsystem initialized
[ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.805956] ohci-pci: OHCI PCI platform driver
[ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 0.808453] ehci-pci: EHCI PCI platform driver
[ 0.810692] FDC 0 is a post-1991 82077
[ 0.810859] libata version 3.00 loaded.
[ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.812133] scsi0 : pata_jmicron
[ 0.812212] scsi1 : pata_jmicron
[ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.860877] hub 1-0:1.0: USB hub found
[ 0.860890] hub 1-0:1.0: 2 ports detected
[ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 0.917507] hub 2-0:1.0: USB hub found
[ 0.917518] hub 2-0:1.0: 2 ports detected
[ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 0.974160] hub 3-0:1.0: USB hub found
[ 0.974171] hub 3-0:1.0: 2 ports detected
[ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.030833] hub 4-0:1.0: USB hub found
[ 1.030843] hub 4-0:1.0: 2 ports detected
[ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.087499] hub 5-0:1.0: USB hub found
[ 1.087509] hub 5-0:1.0: 2 ports detected
[ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
[ 1.643840] usb 1-1: USB disconnect, device number 2
[ 1.644033] usb 1-2: USB disconnect, device number 3
[ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.760313] ehci-pci 0000:00:13.5: debug port 1
[ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.770182] hub 6-0:1.0: USB hub found
[ 1.770191] hub 6-0:1.0: 10 ports detected
[ 1.826731] hub 1-0:1.0: USB hub found
[ 1.826742] hub 1-0:1.0: 2 ports detected
[ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.828580] usbcore: registered new interface driver usbhid
[ 1.828583] usbhid: USB HID core driver
[ 1.883417] hub 2-0:1.0: USB hub found
[ 1.883431] hub 2-0:1.0: 2 ports detected
[ 1.940057] hub 3-0:1.0: USB hub found
[ 1.940067] hub 3-0:1.0: 2 ports detected
[ 1.996722] hub 4-0:1.0: USB hub found
[ 1.996732] hub 4-0:1.0: 2 ports detected
[ 2.053388] hub 5-0:1.0: USB hub found
[ 2.053398] hub 5-0:1.0: 2 ports detected
[ 2.053683] ahci 0000:00:12.0: version 3.0
[ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 2.054699] scsi2 : ahci
[ 2.054775] scsi3 : ahci
[ 2.054850] scsi4 : ahci
[ 2.054920] scsi5 : ahci
[ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.056192] scsi6 : pata_atiixp
[ 2.056251] scsi7 : pata_atiixp
[ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.067129] scsi8 : ahci
[ 2.067200] scsi9 : ahci
[ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
[ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
[ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
[ 2.227109] ata7.00: configured for UDMA/33
[ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.540027] ata3: softreset failed (device not ready)
[ 2.540185] ata3: applying PMP SRST workaround and retrying
[ 2.540217] ata5: softreset failed (device not ready)
[ 2.540381] ata5: applying PMP SRST workaround and retrying
[ 2.540408] ata4: softreset failed (device not ready)
[ 2.540563] ata4: applying PMP SRST workaround and retrying
[ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
[ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708445] ata3.00: configured for UDMA/133
[ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.709436] ata4.00: configured for UDMA/133
[ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
[ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
[ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.716937] sdb: sdb1
[ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.719683] ata5.00: configured for UDMA/133
[ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
[ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
[ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
[ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 2.728116] ata5.00: status: { DRDY }
[ 2.728231] ata5: hard resetting link
[ 2.736521] sda: sda1 sda2 < sda5 >
[ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
[ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
[ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
[ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
[ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
[ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
[ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
[ 3.213356] ata5: softreset failed (device not ready)
[ 3.213519] ata5: applying PMP SRST workaround and retrying
[ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 3.392798] ata5.00: revalidation failed (errno=-5)
[ 8.380028] ata5: hard resetting link
[ 8.866697] ata5: softreset failed (device not ready)
[ 8.866861] ata5: applying PMP SRST workaround and retrying
[ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046260] ata5.00: configured for UDMA/133
[ 9.046276] ata5: EH complete
[ 9.052053] sdc: sdc1
[ 9.052397] sdc: detected capacity change from 0 to 1000204886016
[ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
[ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
[ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 9.103442] ata5.00: status: { DRDY }
[ 9.103556] ata5: hard resetting link
[ 9.590022] ata5: softreset failed (device not ready)
[ 9.590182] ata5: applying PMP SRST workaround and retrying
[ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 9.769458] ata5.00: revalidation failed (errno=-5)
[ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.756687] ata5: hard resetting link
[ 15.243350] ata5: softreset failed (device not ready)
[ 15.247493] ata5: applying PMP SRST workaround and retrying
[ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426255] ata5.00: configured for UDMA/133
[ 15.426271] ata5: EH complete
[ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
[ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
[ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 15.497016] ata5.00: status: { DRDY }
[ 15.501349] ata5: hard resetting link
[ 15.986684] ata5: softreset failed (device not ready)
[ 15.990999] ata5: applying PMP SRST workaround and retrying
[ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169560] ata5.00: configured for UDMA/133
[ 16.169567] ata5: EH complete
[ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
[ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
[ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
[ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
[ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.270799] ata5.00: status: { DRDY }
[ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
[ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.297504] ata5.00: status: { DRDY }
[ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
[ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.324306] ata5.00: status: { DRDY }
[ 16.328707] ata5: hard resetting link
[ 16.813352] ata5: softreset failed (device not ready)
[ 16.817758] ata5: applying PMP SRST workaround and retrying
[ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996263] ata5.00: configured for UDMA/133
[ 16.996279] ata5: EH complete
[ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
[ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 18.110443] systemd[1]: Starting Remote File Systems.
[ 18.110456] systemd[1]: Reached target Remote File Systems.
[ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
[ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
[ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
[ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.110638] systemd[1]: Starting Encrypted Volumes.
[ 18.110651] systemd[1]: Reached target Encrypted Volumes.
[ 18.110664] systemd[1]: Starting Journal Socket.
[ 18.110711] systemd[1]: Listening on Journal Socket.
[ 18.110728] systemd[1]: Starting Setup Virtual Console...
[ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.139007] systemd[1]: Mounting Huge Pages File System...
[ 18.139550] systemd[1]: Starting Journal Service...
[ 18.140217] systemd[1]: Started Journal Service.
[ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
[ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 18.806623] systemd-udevd[155]: starting version 208
[ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 19.331559] ACPI: Power Button [PWRB]
[ 19.331882] ACPI: Fan [FAN] (on)
[ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
[ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.337764] ACPI: Power Button [PWRF]
[ 19.337878] ACPI: Invalid passive threshold
[ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
[ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.388553] wmi: Mapper loaded
[ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
[ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
[ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.717185] MCE: In-kernel MCE decoding enabled.
[ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.780737] [drm] Initialized drm 1.1.0 20060810
[ 19.801750] EDAC MC: Ver: 3.0.0
[ 19.808239] sky2: driver version 1.30
[ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
[ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
[ 19.870517] AMD64 EDAC driver v3.4.0
[ 19.895226] microcode: AMD CPU family 0xf not supported
[ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
[ 20.021077] kvm: Nested Virtualization enabled
[ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
[ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 20.100569] Console: switching to colour dummy device 80x25
[ 20.101154] [drm] hdmi device not found 1 0 1
[ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
[ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.158048] sp5100_tco: PCI Revision ID: 0x13
[ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
[ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
[ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
[ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
[ 20.204615] [TTM] Initializing pool allocator
[ 20.204619] [TTM] Initializing DMA pool allocator
[ 20.204630] nouveau [ DRM] VRAM: 512 MiB
[ 20.204632] nouveau [ DRM] GART: 1048576 MiB
[ 20.204636] nouveau [ DRM] TMDS table version 2.0
[ 20.204638] nouveau [ DRM] DCB version 4.0
[ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
[ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
[ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
[ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 20.204652] nouveau [ DRM] DCB conn 00: 2030
[ 20.204655] nouveau [ DRM] DCB conn 01: 1130
[ 20.204657] nouveau [ DRM] DCB conn 02: 0210
[ 20.204659] nouveau [ DRM] DCB conn 03: 0211
[ 20.204660] nouveau [ DRM] DCB conn 04: 0213
[ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
[ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.210897] [drm] No driver support for vblank timestamp query.
[ 20.211027] nouveau [ DRM] 1 available performance level(s)
[ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
[ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
[ 20.214375] ppdev: user-space parallel port driver
[ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
[ 20.288622] EDAC amd64: DRAM ECC disabled.
[ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 20.288675] fbcon: nouveaufb (fb0) is primary device
[ 20.376049] Console: switching to colour frame buffer device 128x48
[ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 20.376340] nouveau 0000:01:00.0: registered panic notifier
[ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
[ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
[ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
[ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 102.400046] ata4.00: status: { DRDY }
[ 102.400051] ata4: hard resetting link
[ 102.933349] ata4: softreset failed (device not ready)
[ 102.933356] ata4: applying PMP SRST workaround and retrying
[ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102326] ata4.00: configured for UDMA/133
[ 103.102330] ata4.00: device reported invalid CHS sector 0
[ 103.102340] sd 3:0:0:0: [sdb]
[ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
[ 103.102344] sd 3:0:0:0: [sdb]
[ 103.102345] Sense Key : 0xb [current] [descriptor]
[ 103.102348] Descriptor sense data with sense descriptors (in hex):
[ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 103.102355] 00 00 00 00
[ 103.102358] sd 3:0:0:0: [sdb]
[ 103.102359] ASC=0x0 ASCQ=0x0
[ 103.102361] sd 3:0:0:0: [sdb] CDB:
[ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
[ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
[ 103.102415] ata4: EH complete
[ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
[ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
[ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386714] ata4.00: status: { DRDY }
[ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386723] ata4.00: status: { DRDY }
[ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386731] ata4.00: status: { DRDY }
[ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386740] ata4.00: status: { DRDY }
[ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386748] ata4.00: status: { DRDY }
[ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386757] ata4.00: status: { DRDY }
[ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:
Maybe you are looking for
-
Pulling PR's by sales order in me21n
Hey Gurus, We have line items on a sales order that are different materials but are sourced from the same subcontractor. The business requirement is that me21n be able to aggregate these PR's into the PO by the sales order so that the users do not h
-
TableView: Instead of "Page 1 of 6" show "Element 1-10 of 36"
Is it possible to change the default behaviour of the paginator of a tableView? By default, it shows "Page x of Y", but I would like to change it to "Element x-z of Y".
-
List Videos in Alphabetical Order on iPhone 3GS?
I am having trouble with my recently synced videos to my iPhone 3GS - I have synced across a bunch of audio and video files and when I browse the songs they are all listed in alphabetical order yet the videos appear to be in a random order. I have co
-
Screen stuck with not enough storage message
what can do to remove it. it gives an option to go to settings for storage or close the message none of this working and this message pops up eveytime i charge my phone with the usb please helpppp
-
Rollback on transaction failes
Hi, I have got a problem when I try to rollback a transaction using a JDBC driver, but I don't understand why. Maybe someone can help me. My problem is as follows: on a connection with AutoCommit set to true, I define some INSERT actions on a certain