Error modifying a category in OCS 10.1.2

Hi.
I have created several categories in Content Services using the Web GUI. When i try to modify a category or subcategory, the following error pops up:
Error
An unexpected error has occurred. Try your operation again later.
Why is it happening or what can i do to track this error?.
Thanks i advance, Luis ...!

Please look for exceptions in the application.log:
$ORACLE_HOME/j2ee/OC4J_Content/application-deployments/content/OC4J_Content_default_island_1/application.log
regards,
-sancho

Similar Messages

Modify ATP Category of an Order

Hi,
I have to modify the Category(AI) of an Order during the CTM run. I looked into the BADI /SAPAPO/CTM_ORDERS But it seemd not to work.
Appreciate If you please let me know where we can modfiy it.
Thanks

Hi,
Business wants CTM generated planned orders to be differentiated between sales order related and forecast related. The first option to achieve this was by converting SNP planned orders to PPDS orders and hence it changes the category from AI to AJ. This conversion failed the test due to date rescheduling of the orders with date earlier than todays date.
Hence differentiation can be achieved by using a different order category in CTM.
Thanks
Pradeep

Error Acct. assgt. category 3 not defined (please check your input)

Hello all I'm trying to create BAPI_PO_CREATE and getting error " Acct. assgt. category 3 not defined (please check your input) ".
What is this Account assignment category concept in SAP ? What input value should i change ?

Hi
In addition to Srinivas, account assigment 3 is missing in OME9 in your case
So before running your Bapi make the necessary settings
Thanks
vishnu

Error while deleting category and hierarchy

Hi All,
I am not able to delete the categories and hierarchy. It is throwing a message products are still assigned to categories. But when I go to maintain products and click on start it is not showing any product. I created another category also. It is showing another error certain set types can be assigned to base categories. I went to se38 and given the program COM_PRODUCT_DELETE_SINGLE also and deleted every product. Still I am not able to delete category.
Again when I delete some set types from the category it is showing another message that products of subcategory already exists. Set type cannot be deleted.
Can anybody suggest me what should I do?
Thanx
Sarvana

Hi Saravana,
If you have tried COM_PRODUCT_DELETE_SINGLE, then I'm guessing that you must be aware of making an entry in the table COMC_PR_TOOL_REG wherein you register the system program that you want to execute for ex: Delete Product, Category etc.
Ensure that there are no entries in the table COMM_PRODUCT. You can also try program COM_PRODUCT_DELETE_ALL to delete all products in the system.
In order to delete Product hierarchy you could use program COM_HIERARCHY_DELETE_ALL or COM_HIERARCHY_DELETE_SINGLE which would delete Hierarchies with All Category Data.
Also, in order to delete Category-Set type relationships, delete entries from the database table COMM_CATFRGR.
Hope this helps.
Regards,
Pavithra
**PS : Please reward points if this helps

Error in Product Category Replication

Hi Gurus,
We are trying to replicate the product category from R/3 4.7C system to SRM5.0 system.
All the relevant table settings have been done in both the systems and we have successfully loaded objects: DNL_CUST_BASIS3 and DNL_CUST_PROD0 from R/3 to SRM system.
Now, the problem is with loading of the object DNL_CUST_PROD1. When we start its intial upload, the outbound queue in SRM system shows that the status of the queue is "SYSFAIL". The details of the error message show : "Filter criteria invalid. See note 0419752". We have set filter for T023 table for MAKTL field, so that only one material group is replicated from R/3 client.
We have checked the relevant release versions mentioned in the note, but our systems are on a higher version release.
Could anyone let us know which correction patch to implement in this case?
Thanks n Regards,
Ancy

OK. GO to R3AR2 AND CLICK THE PENCIL And click new entries
now you get requester name
adapter object =DNL_CUST_PROD1
table name =T023
field name = MATKL
LOW = you are material grup which you want to only rplicate
option = Equality (=low)
high = empty
go to r3ar4 and give your request name and supply dest and source that all
check comm_category table.

Error popups Item category to be assigned

Hello Sir/madam
"There is no item category assigned to account to the specified company code" , if a pop up , message comes like this , what the way to sortout, such error, have assigned in charted occount, in F-02 after updating, amount, once try to save, this type of error is given,
Been to spro and did document spliting,-activate document splitting, but, again error is coming, and the trasaction is not accepted.
thanking you,
warm regards

Hi
Please give in document splitting accounting which you are using in for posting in f-02 and give category save. Then go to f-02 please check.
Regards
Ramesh

Idoc error - Modify or delete Source List - any ideas experts PLZ?

Hi experts,
I create a source list record by using Idoc with segments E1EORDH and E1EORDM
the source list record is correctly created in database
<u>=> the problem is when I try to modify or delete this source list record</u>
<b>Error message (always the same) : Please reconcile source list</b>
I try to use different codes is msgfn but it dont work
I think this message appear may be cause the source list record already exist..... and I want to modify or delete it, but it dont work
Please, help me experts
Thank you in advance

Hi there,
I am also currently encountering this same message and not sure what is wrong.
Does anyone have any idea or resolution?
Thank you.
Cheers,

Error in iPhoto Category

Hi, all.
Is it just me, or does anyone else see a problem loading the iPhoto category or any other forum? I refreshed the page today and it was twice as wide as it should be. I figured I needed to freshen up my browser, so I quit Firefox and tried again. This time it wasn't too wide for the screen, but I got something weird.
At the top is the normal iPhoto category page, followed by the beginning of the list of topics. Weird thing is, after 16 topics listed I have an error page:
I've tried loading several times and keep getting it like that. If I choose a subcategory or specific forum I do not get this error.
Anyone else see this?
Regards.

You're Welcome Smtr!
But I don't know if my alert had any bearing on the correction.
Your & Ileen's topics, in this Forum, may have also done the trick!
And Thanks for the !
ali b

ERROR : No item category exists (Table T184L LB VERP )

There is a error log "No item category exists (Table T184L LB VERP ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
I already add item category LB VERP via TCode 0184, but it still error.
Could anyone help me please
Thanks & Best Regards,
Saiful arif

Hi Arif,
Did you define delivery item category for LB VERP record in transaction 0184?
Regards,
Csaba
Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM

Error with Valuation Category in Accounting 1 Tab of Material Master

Dear All,
I have created plant and also activated the "Split Activation" for that plant through SPRO-MM-Valuation & A/c Assignment ---Split valuation.
But when i Extend the material form another plant the "Valuation Category" field in Accounting 1 Tab of Material Master becomes INACTIVE (i.e. it becomes gray). Where as for the plant (from which i am copying the material) the same field is ACTIVE.
Please suggest me what might be the error.
I have checked the setting for both the plants i.e. in which it is working and the other where it is not working. The settings are same.
Please help.
Thanks in advance.

Hi Shailendra
If this is for a single material.
I hope u r using MM01 only by giving reference of existing mat., in this case, at this stage only you have to maintain Valuation Category.
Once the material is created, the field will become gray.
This is what I know. If still, there is any way to make this field active, if u come to know, please let me know too.

Error in Item Category Determination

Hai,
When I am trying to define the Item category determination for the quotation type I get the following error message
"only quotation items can be assigned to package transaction types"
Can you please let me know the reason for the error
Thanks,
Vijay

I was able to resolve it.

Help! Errors when changing category in text items!

I'm very often experiencing problems when editing a text item and moving it from one category to another. It won't do it. The editing page will stay the way it is and the only message I get is: Error 30694: Error in API - update item failed
What could this be? This is very annoying. The portal can be seen at http://www.crmexpert.nl
Aliktte

I haven't seen this problem. Please provide more details: what version of Portal, what types of items are affected, and anything else you think may be relevant.
Thanks,
Jerry

Error in Size category in COPA

Dear experts,
When i creating Operating concern.System is showing error message'" maintain size category of CE1s001 in SE13 tcode.
Not able to understand the logic.Why it is required?
If i will maintain.Will not hurt the process.Becoz i will create operating concern later based on client requirements.
Right now i m adding Batch field in operating concern S001 in gloden client so that i can do some testing.
regards
RR

HI,
for CE1S001 the size category is empty in SE13, thus you cannot use this sample operating concern if you don't maintain a size category.
F1 help: Size category
     The size category determines the probable space requirement for a table
     in the database.
     You can select the categories 0 to 4 for your table. Each category is
     assigned a specific fixed storage area value in the database. When you
     create a table, initial space is saved for it in the database. If more
     space is required later as a result of data that has been entered, the
     storage space is increased in accordance with the category selected.
     Press F4 on the field Size category to see the number of data records
     that can be maintained for the individual categories of your table
     without complications ensuing. These complications could be for example
     a reorganization becoming necessary because the maximum space to be
     reserved for the table was exceeded due to the maintained size category.
BR Christian

Error when attempting to merge OCS R2 and Lync 2010 Topology

Hello,
We are having an issue when trying to merge our OCS R2 and Lync 2010 deployment. The error is as follows:
TopologyXmlFileWriter::OpenReportFile IOException: Message
2014-01-22 17:15:54 INFORMATION : Executing query: "SELECT * FROM MSFT_SIPESGlobalSearchSetting"
2014-01-22 17:15:56 INFORMATION : Topology file path: ""
2014-01-22 17:15:56 INFORMATION : Executing query: "SELECT * FROM MSFT_SIPTrustedServiceSetting WHERE FQDN = "ocsaeint.domain.org""
2014-01-22 17:15:56 ERROR : Found the following error while Validating "C:\MergeTopologyInput.xml":
Cannot find media relay port for "ocsaeint.domain.org". Possible reasons include: 1. Media relay has not been activated on this edge cluster. Verify that media relay has been correctly installed on computer "ocsaeint.domain.org"
2. User might have misspelled the fully qualified domain name (FQDN) of the computer where media relay is installed. If you are using Windows PowerShell, check the user input file. It is defined in user input File as "InternalFqdn"
= "ocsaeint.domain.org" 3. User might have misspelled the fully qualified domain name (FQDN) of the computer running media relay while using Topology Builder. Verify that the user has provided the correct FQDN.
We've tried the following with no luck:
http://social.technet.microsoft.com/Forums/lync/en-US/4d32160f-cd95-43d7-8dbd-10a043fdcc14/cant-get-topology-to-merge-with-ocs-2007-r2?forum=ocsplanningdeployment
http://www.chuzpah.com/uc-corner/2011/8/5/integrating-ocs-2007-r2-with-lync-server-2010.html
Any help is appreciated!

The article that you followed is to the point http://www.chuzpah.com/uc-corner/2011/8/5/integrating-ocs-2007-r2-with-lync-server-2010.html
The only thing you have to make sure is if you published your topology after making these changes.
Hire Us : http://www.datsit.in/
Get your first Lync project done absolutely free!

Error when changing category of text items!

I'm very often experiencing problems when editing a text item and moving it from one category to another. It won't do it. The editing page will stay the way it is and the only message I get is: Error 30694: Error in API - update item failed
What could this be? This is very annoying. The portal can be seen at http://www.crmexpert.nl
Aliktte

I haven't seen this problem. Please provide more details: what version of Portal, what types of items are affected, and anything else you think may be relevant.
Thanks,
Jerry

Error modifying a category in OCS 10.1.2

Similar Messages

Maybe you are looking for