Error monitoring through workflow for idoc with message type ORDRSP
Hi All,
Through WE19 I am trying to post a failed idoc ie idoc in 51 status for message type ORDRSP to check whether the event IDOCORDRSP-INPUTERROROCCURED event is triggering or not. Though the idoc is going into 51 status and partner profile is maintained I cannot find this event in SWEL. I checked in fm IDOC_INPUT_ORDRSP fm and found that workflow_result is 99999.
Can anybody tell me why the event is not getting triggered for the message type ORDRSP or where do I debug to find out what is going wrong. IDOC_INPUT_ORDRSP fm is getting called from BUS2012 'S method confirmfromORDRSP which is very strange.So I am not getting where do I debug.
Regards
Suchandra
Hi All,
Solved it by my self.. To trigger the event we need to populate the EDIDC control record in WE19 and press standard inbound button 'not test by inbound fm) and then the inputerroroccured event will trigger...
Regards
Suchandra
Similar Messages
-
Workflow Ends in Error " No auth to send IDocs with message type ORDRSP"
Hello All,
I have created an RFC user with limited Authoprizations including WE* tciodes and a few ME* transactons for an ALE Set up. I want to make sure i would not be giving more authorizations (extensive) to this RFC user and assign Just required authorizations. So i started testing testing and the inbound IDOC ended in error with a message " No auth to send IDocs with message type ORDRSP" Message no. SR053. Is there any way to find out what is the missing authorization object for the User. Any inputs would be really apprecaited.
Br,
SriHi !
Becaus alle this happens in beckgound, things are a bit difficult but solvable....
What you should do is a "Authority trace" ... as follows....:
- Go to the ST01
- Mark "Authorisation Check"
- Swich the trace on for your Workflow user
- Execute the Workflow until the error uccurs
- Go back to the ST01
- Press the "Analyze" button and see what error occurs
Dont forget to swicht the trace off... otherwise the tracefiles become realle BIG !
Regards
rainer
Some Reward poins would be nice if that helped.... -
RFC error "No authorization to send IDOCs with message type ..."
Hi all,
I have now tried just about everything I could think of, applied all the notes mentioned on this forum but still no luck. Can anyone please help ...
I have got a file to idoc scenario, the status in the sxmb_moni is successful, but the outbound processing logs an error. When I go to transaction SM58 I get an error for the user XIAFUSER with the message "No authorization to send IDOCs with message type WPUUMS".
I have tried giving this user SA_ALL access and still got the same error thus concluding that this is not an authorisation error.
Any suggestions?
Regards,
LieselHi Liesel,
The RFC destination that you have put in IDoc communication channel must be present in your SAP XI system, transaction SM59 also.
Please check if the user id/Password that you have given has all the authorization.
Also check the User ID and passwrord in SM59 in R3 and see if a Remote Login is possible.
There is also some configuration by which the clients are allowed / blocked from receiving Idocs from XI. Basis guys can do it for you. Please approach your basis consultant. Hopefully that helps..
Regards,
Abhy Thomas -
Error : No authorization to send IDocs with message type MATMAS
Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.<i>You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT value 16
Authorization object S_IDOCDEFT
Field name ACTVT value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT value 03
Field name DICBERCLS value</i>
from the note mentioned above.
Regards
Bhavesh -
Issue: "No Authorization to send Idocs with message type Orders" - IDX5
Hi All,
I am working on a File to IDoc(Orders.Orders05) scenario. The sender is PI Server and the receiver is the SAP ISR system. A technical system has been created in PI SLD for the ISR system and a Business system is added to that. The logical system created in ISR system using Tcode BD54 is added to the business system in PI. A new RFC destination is created in PI system to connect to the ISR system.
On the ISR system Partner profile is created using TCode we20 with the same logical system name already created using Tcode BD54.
When sxi_monitor is executed on the PI system, It shows checked flag on the Inbound side and Red flag on the Outbound side. And when idx5 is executed, it shows the new Idoc number and when it is double clicked, it shows the Status Text as
"No Authorization to send IDocs with message type Orders".
All authorizations have been provided on the Sender side.
Please let me know if any authorization need to be provided on the ISR system or Is this an error on any settings.
Thanks in Advance.
Stalin S.Hi,
Check this Thread which deals with the Authorization Issue
RFC Adapter
And also check this how to check whether u have sufficient authorization to send the Idocs or not
To test the Authorization check
Double click the RFC Destination that u have created in XI towards R/3 in SM59
Select UtilitiesTestAuthorization test
By this you can come to know whether your user is having the propper authorization or not
REgards
Seshagiri -
No authorization to send IDocs with message type R
I'm in the process of installing some business content for a 3.5 prototype. When trying to load some master data I get the following error in the transactional RFC in the source system.
"No authorization to send IDocs with message type R"
Any clues to what may be causing this?
Any help appreciated.
thanks
MikeHi Michael,
the suggestion for SAP_ALL was just for testing purposes in order to see whether it works then. If security is an issue you should reduce the authorization to the ones really needed (see note).
Another security option is to make the background user a system user and not a dialog user.
Regards, Klaus -
Creation of IDOC with message type INVOIC01
Hi All,
I am trying to create a new IDOC with message type INVOIC01.
When I see transaction WE81, I observe that the required message type INVOIC is available. Also in WE82 the basic types INVOIC01, INVOIC02 and INV_ID01 are attached to the message type INVOIC.
However, while trying to create an IDOC in WE19 using a message type, I get options to create against INVOIC02 or INV_ID01. The basic type INVOIC01 is not getting populated because of which all the IDOC that I create are of basic type INVOIC02.
The client wants me to create IDOCs with basic type INVOIC01.
Can anyone please help?
Thanks in advance.
regards
NagarajanHi Nagaraj!
I've looked at the documentation and did not find information, which would help me. Should I use in my case z-segment to put extra lines or there is some qualifier in segment E1EDP02 (Document Item Reference Data), which triggers to another referencing (not PO or delivery note)?
Thank You,
Natalija -
Workflow notification is not tiggered for IDoc of message type 'WPUWBW'
Hi All,
I would like to know the setting up of workflow notification for IDoc message type 'WPUWBW' (idoc of different message type is getting notified). Please provide pointers and also the steps for the above issue.
Regards,
PSSHi Ferry,
System checks for the IDOC version and then calls the EXIT if the versions are different .Following is the code snippet that ensures the above thing in include LBD11F0T :
Change IDOC version if target <> current version.
IF F_EXCEPTION-MSGTY IS INITIAL
AND ( F_IDOC_CONTROL-IDOCTP <> TARGET_IDOCTP
OR F_IDOC_CONTROL-CIMTYP <> TARGET_CIMTYP ).
PERFORM CHANGE_IDOC_VERSION TABLES T_IDOC_DATA
USING TARGET_IDOCTP
TARGET_CIMTYP
CHANGING F_IDOC_CONTROL
CHANGED_FLAG
F_EXCEPTION.
ENDIF. "End of if subrc = 0
Have you tested it ? Pls suggest if I am wrong somewhere.
Thanks and Regards
Gurpreet Singh -
Wrong Partner Type in IDoc with message type REMADV
Dear all,
We have created 2 IDocs, one for outbound (first in one company code) and one for inbound (receiving company code) with transaction F110 (message type REMADV, Idoc basic type PEXR2001). However, for the first outbound IDoc we have created, we have the wrong Partner type (we would like it to get type KU (customer)) LS (Logic system).
Does anyone know how to change the partner type from the Idoc generationg?
Many thanks,
RonnyHi,
Welcome to SDN.
Please delete the exisiting outbound partner profile (WE20) for message type REMADV which under partner type LS (Logical System) and setup new outbound partner profile for partner type KU (Customer).
Regards,
Ferry Lianto -
i need an example how to use the message type in IDOC
Hi Manohar,
This is custom IDoc prgm.Award points if useful
IDocs Standalone program
This Prgm will upload data in flat file into internal table and sends that data to inbound system
REPORT ZMMMC9403_UPLOAD_MATERIAL_IDOC.
*1.Create parameters/select-options for input data. i.e., empno, message type, logical system.
parameters : p_mestyp like edmsg-msgtyp default 'zmsgkk',
p_logsys like tbdlst-logsys obligatory.
*2.Create Data objects for control record, data record and database table.
data : c_segment like edidd-segnam value 'ZKSEGTYPE', "Data record (IDoc)-Segment type
c_idoctp like edidc-idoctp value 'ZKIDOC'. "Control record (IDoc)-Basic type
data : begin of itab occurs 0,
zsno like zkiran-zsno,
zsname like zkiran-zsname,
end of itab.
data : w_itab like itab.
data : s_segment like zksegtype.
data : i_edidd like edidd occurs 0 with header line.
data : i_control_record like edidc.
data : i_comm_idoc like edidc occurs 0 with header line.
*3. Select the data from flatfile/corresponding tables into internal table for a defined condition.
*select single zsno zsname from zemp into corresponding fields of it_zemp where empno = p_empno.
call function 'GUI_UPLOAD' "since the data is coming from flatfile, GUI_UPLOAD is used
exporting
filename = 'C:\DATA.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
tables
data_tab = itab.
*4. create control record into internal table.
i_control_record-mestyp = p_mestyp. "Message Type
i_control_record-idoctp = c_idoctp. "Basic type
i_control_record-rcvprt = 'LS'. "Partner Type of Receiver
i_control_record-rcvprn = p_logsys. "Partner Number of Recipient
*5. create data record into internal table.
*i_edidd-segnam = c_segment.
loop at itab into w_itab.
s_segment-zsno = w_itab-zsno. "Application Data
s_segment-zsname = w_itab-zsname.
i_edidd-sdata = s_segment.
i_edidd-segnam = c_segment.
append i_edidd.
endloop.
*6. Process ALE Service Layer using the function module MASTER_IDOC_DISTRIBUTE. It returns the corresponding IDoc No.s.
call function 'MASTER_IDOC_DISTRIBUTE'
exporting
master_idoc_control = i_control_record
tables
communication_idoc_control = i_comm_idoc
master_idoc_data = i_edidd
exceptions
error_in_idoc_control = 1
error_writing_idoc_status = 2
error_in_idoc_data = 3
sending_logical_system_unknown = 4
others = 5.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*7. Display Communication IDocs.
loop at i_comm_idoc.
write : / 'Communication IDoc No. is : ', i_comm_idoc-docnum.
endloop.
*8. Commit Work.
commit work. -
Error when executing the program RBDMIDOC with Message type HRMD_ABA
Hello All
I finished the integration between CRM and HR
Now I am able to replicate the employees and the organizations, but when I created a schedule job for the program RBDMIDOC and message type HRMD_ABA the system gives me warning and message: no data selected for distribution even if I try to run the program using SE38 I am getting the same error message
I already activated the message type using BD50 and activated the Change pointers using BD61
Regards
Jacopo Fransoiceus the program
RHALEINI -
Outbound Idoc error handling through workflow
Hi,
I am trying to set up the workflow for outbound error handling. I found that there is a task TS00007989 which need to set up.
How this task can be triggered when outbound idoc error occurs in the system?
Kr,
Vithalprasad
Edited by: Vittalprasad on Jun 9, 2010 11:52 AMHi,
Have a look
Outbound IDoc Error Handling via Workflow
Outbound idoc error handling through workflow -
Creation of Custom IDoc with Message control for sales Order
Hi all,
I am trying to create custom Outbound IDoc with message control.
I wrote the code in a function module and i want to register that function module. (as in inbound registration of function module as in BD51).I am not knowing if that registration is necessary for outbound Idoc, if so in which transacition?
Please list me the steps to create a custom IDoc for Message control.
Thanks in advance,
Regards,
John.Hi,
You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
check this link:
Re: Master_IDoc_Distribute
and use transaction : WEDI for IDOC configurations.
here you will have all the transactions(step by step) to set the outbound IDOC configurations.
Regards
Appana -
I've rented an SD movie from iTunes but cannot download it as I normally do to my iPad 2. Message reads "download error" followed by a small window with message "movie cannot be downloaded at this time". I have been billed by iTunes. What next?
Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H. -
Outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON
Hi Friends
I am trying to pack outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON.
But IDOC has error Specification of destination HU missing.
Could you please help us to resolve the issue to Pack the outbound delivery with the IDOC.
Thanks
SRHI Ian Kehoe
Sorry for delay in reply
Thanks you very much
I solved that problem .
Could you please advice test data for IDOC DELVRY06 packing hierarchy (multi level packing) to pack SAP outbound delivery.
Thanks
Ravi
Maybe you are looking for
-
Itunes 10.7 wont open in windows 7
Hi just downloaded 10.7 and when I double click on itunes icon both in start menu and desktop icon wont run I have deleted bonjour, reinstalled nothing working any help greatly appreciated
-
Any great Javascript training available online?
Hi, I am an artist who appreciates the awesome power of Javascript, and I have come to realize how great it would be to become proficient in it. I wanted to ask this community: 1. Can you recommend any really excellent Javascript training for beginne
-
How can I increment a dynamic value each time the request is sent?
One of my requests is passing a sequence number which gets incremented every time the request is sent. The sequence number is incremented in javascript on the client; the html looks something like this: target=target+"&sequenceNumber="+sequenceNumber
-
Hi all, I copied SAP standard report RSNASTED. Then I assigned the copy as IDOC processing program to an output type. Once I'm creating that output message I got an 'A' error because the internal table for the IDOC data (type EDIDD) is empty. After t
-
Saving a PDF at a certain zoom level
I have an Illustrator file that I want to save at different zoom levels (100% & 200%). I have to save these out to PDF's but once I open them Acrobat opens them to a certain dimension. Is there a way to manipulate the zoom and save feature in the doc