Error moving system to reiser4

Hi,
I follow this hint: http://wiki.archlinux.org/index.php/Reiser4FShowto
but when I reboot I have error:
VFS: can't find an ext2 filesystem on dev hda8
mount /dev/root on /new_root failed: invalid argument
I have /dev/hda8 reiser4 filesystem on witch I copy my system arch
initrd is to be rebuild ?

the ext2 error may have been caused from not building ext2 into the kernel. Its needed for initrd and initcpio.

Similar Messages

Errors in system.log since leopard upgrade

I have a mac mini core duo 1.83, with 2gb ram.
It was running Tiger until I upgraded it to Leopard about October 27th.
I used the archive and install installation method.
It has been running fine. The only "glitch" I have noticed is a very occasional
pause in music playing in iTunes.
While investigating the cause of that, I realised that the system.log file is very large, and there are many many instances of this error in it.
Dec 10 15:42:11 macmini Unknown[36394]: Error loading /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/MacOS/IOUSBLib: dlopen(/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bu ndle/Contents/MacOS/IOUSBLib, 262): no suitable image found. Did find:\n /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/MacOS/IOUSBLib: mach-o, but wrong architecture
Dec 10 15:42:11 macmini Unknown[36394]: Cannot find function pointer IOUSBLibFactory for factory 4547A8AA-9EF3-11D4-A9BD-000A27052861 in CFBundle/CFPlugIn 0x262580 </System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle> (bundle, not loaded)
The latest log file is over 500mb
-rw-r----- 1 root admin 607343865 Dec 10 15:49 system.log
Also I see these errors
Dec 10 15:50:01 macmini com.apple.launchd[1] (org.postfix.master): Throttling respawn: Will start in 9 seconds
Dec 10 15:50:10 macmini postfix/master[67855]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable
Dec 10 15:50:11 macmini com.apple.launchd[1] (org.postfix.master[67855]): Exited with exit code: 1
Dec 10 15:50:11 macmini com.apple.launchd[1] (org.postfix.master): Throttling respawn: Will start in 9 seconds
Am I likely to see any problems other than the large log files?

Large log files are potential problems. The larger they get the greater the probability they will become corrupted. You should use some software to clear out the logs regularly by running the built-in Unix scripts. See my maintenance FAQ for helpful suggestions:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
I'm only supposing, here, but I think your log errors are generated by left over elements of Tiger not removed when you installed Leopard. This is always a potential problem with upgrade installs and Archive and Install when moving to a new major OS version. I generally recommend doing an Erase and Install.

Transports while importing DS error "Source system QAS does not exit "

Hi Experts,
      For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as below:
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
   Source system QAS does not exist
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
   There is no DataSource with these attributes
   Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
   Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
   Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
   Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
   Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
   Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
   Post-import methods of change/transport request CXCK900023 completed
        Start of subsequent processing ... 20090306024549
        End of subsequent processing... 20090306024550
   Execute reports for change/transport request: CXCK900023
   Reports for change/transport request CXCK900023 have been executed
        Start of................ 20090306024550
        End of.................. 20090306024550
   Execution of programs after import (XPRA)
   End date and time : 20090306024550
   Ended with return code: ===> 8 <===
Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
Can any body suggest on this.
Regards
Vinod

Hi vinod kumar,
i hope you need to map source system From QAS to DEV system,
genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
Regards
Daya Sagar

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Windows Server 2012 VSS error "The system writer is missing"

Hello All,
I have a HP server that I have just installed Server 2012 standard, SQL Server 2012 and Sharepoint 2013.
When I try to take bare metal backup I get the error: "The system writer is missing", I have tried the backup as the local admin and domain admin.
The backup will only work if I decide to back up C:, once I select "Bare Metal" or "System State" the backup fails.
I have tried this solution: http://technet.microsoft.com/en-us/library/cc734021.aspx but have not had any luck yet.
When I run the command "vssadmin list writers" I can not see "System Writer" listed.
How can I add/turn on the System Writer?

Hi,
The system writer fails due to the fact that the trusted installer & system accounts are missing permissions to files in the directory %windir%\winsxs\filemaps\.
To resolve this issue, please run the following commands from an administrative elevated Command Window:
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
For more information, please also refer to the following links:
Discussion Forum FAQ: VSS System Writer is missing.
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/0b1eb10a-d666-4f5e-b657-c93b1d754a7f
Failure during Windows Server 2008 System State Backup & System Writer Missing
http://blogs.technet.com/b/chrad/archive/2009/11/18/failure-during-windows-server-2008-system-state-backup-system-writer-missing.aspx
Regards,
Arthur Li
TechNet Community Support

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

Entries appearing in Service Tax Control Account due to Error in System

Hello Experts,
     I am facing a problem in one particular GL i.e.Service Tax Control a/c
error-Entries appearing in Service Tax Control Account due to Error in System
entries are- Service tax control   a/c   -
Dr. 21,621.86
                        To Service Tax Control a/c     Cr.      21,621.86
My question is when i am making entry as Service tax Dr-21,621.86,Service Tax Cr.21,621.86,so it will adjust,and in FBL3N amt will show 0 but it was showing 21,621.86
Plz Guide me asap,very urgent issue
Thanks in Advance

Dear,
What was the balance before you posted the below entry?
Also run FBl3N with correct date parameters..
br,Vivek

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

attach a screenshot of the error message.

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Gets error "-17502; System Level Exception" while running the custom Step in NI TestStnad 2010

I have a custom teststand step which works like For loop in TestStand. Previously I was using LV 2009 and NI TestStand 4.2.1 and this step was working fine. Recently I upgraded my system to LV 2010 and TestStand 2010, since that it is not working.
When I run the step it gives error "-17502; System Level Exception". I have attached error screenshot.
I am using NIFlowControl.dll in this step.
Please do the needful.
Attachments:
System Levle Exception error.JPG ‏25 KB

The source code for NIFlowControl.dll ships with TestStand. Did you perhaps
1) modify the code and rebuild this dll in teststand 4.2.1, but did not move your changes into the 2010 version and recompile the 2010 version?
Or
2) Move your 4.2.1 version of this dll to 2010 in which case it might be missing important code that exists only in the 2010 version. It's best to redo your code changes to the 2010 version and recompile that if needed.
Also ideally your modified version of NIFlowControl.dll should be located in the teststand public directory rather than the program files directory.
-Doug

Error "602" System error: AK Datapart too short

Hi all,
Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around.
Anyway here it is:
While running a compression in BW we get Error "602" System error: AK Datapart too short.
This is happening while doing a select statement during the compression of the infocube. It does not happen all the time, just kind like when ever it feels like. The only note I could find in OSS was one about Live Cache and it does not seem to apply.
Here is the dump which I really hate doing this, but it gives all the info needed :
untime Error          DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
Date and Time          08/15/2007 12:23:09
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error "-602" occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "System error: AK Datapart too short"
Database error code .......: "-602"
Triggering SQL statement...: "INSERT INTO "/BIC/EZPSD_C03" ( "KEY_ZPSD_C03P",
"KEY_ZPSD_C03T", "KEY_ZPSD_C03U", "KEY_ZPSD_C031", "KEY_ZPSD_C032",
"KEY_ZPSD_C033", "KEY_ZPSD_C034", "/BIC/ZNET_ASP" ) SELECT ? ,
F."KEY_ZPSD_C03T", F."KEY_ZPSD_C03U", F."KEY_ZPSD_C031", F."KEY_ZPSD_C032","
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"GP31VIZWJDTT90894L1IA5YAC7G" or "GP31VIZWJDTT90894L1IA5YAC7G"
"TRANSFER_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"TRANSFER_ALL"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "sdcbw03"
Network address.......... "10.64.18.76"
Operating system......... "Linux"
Release.................. "2.6.9-55.ELsmp"
Hardware type............ "x86_64"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 21
Short dump setting....... "full"
Database server.......... "sdcbw03"
Database type............ "ADABAS D"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Nov 5 2006 19:46:34"
Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version......... "SAPDB 7.5.0.030 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "MaxDB 7.5.0"
SAP database version..... "640"
Operating system......... "Linux 2.6"
Memory usage.............
Roll..................... 16192
EM....................... 20949280
Heap..................... 0
Page..................... 24576
MM Used.................. 9235016
MM Free.................. 3331560
SAP Release.............. "640"
User and Transaction
Client.............. 011
User................ "ALEREMOTE"
Language key........ "E"
Transaction......... " "
Program............. "GP31VIZWJDTT90894L1IA5YAC7G"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "GP31VIZWJDTT90894L1IA5YAC7G" in
"TRANSFER_ALL".
The main program was "RSPROCESS ".
The termination occurred in line 573 of the source code of the (Include)
program "GP31VIZWJDTT90894L1IA5YAC7G"
of the source code of program "GP31VIZWJDTT90894L1IA5YAC7G" (when calling the
editor 5730).
The program "GP31VIZWJDTT90894L1IA5YAC7G" was started as a background job.
Job name........ "BI_PROCESS_COMPRESS"
Job initiator... "ALEREMOTE"
Job number...... 12185102
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "TRANSFER_ALL" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "GP31VIZWJDTT90894L1IA5YAC7G ". Its source code
starts in line 557
of the (Include) program "GP31VIZWJDTT90894L1IA5YAC7G ".
Source Code Extract
Line
SourceCde
543
ENDIF.
544
545
COMMIT WORK.   " commit and close cursors
546
547
l_str = i_max_requid.
548
PERFORM msg_append(saplrscondense)
549
USING    'S' '355' l_str space space space
550
CHANGING c_t_msg.
551
552
ENDFORM.                               " CONDENSE_FACTTABLE_NEW
553
554
555
     Form TRANSFER_ALL
556
557
FORM TRANSFER_ALL USING i_ref_update       TYPE rs_bool
558
i_pdimid           TYPE I
559
i_pdimid_ref_point TYPE rsd_sid
560
i_pdimid_normal    TYPE rsd_sid
561
i_recordtp         TYPE rsd_sid
562
CHANGING e_ref_ins_cnt TYPE I
563
e_ins_cnt     TYPE I
564
c_t_msg       TYPE rs_t_msg.
565
566
CALL FUNCTION 'RSDU_INFOCUBE_INDEXES_DROP'
567
EXPORTING
568
I_INFOCUBE = 'ZPSD_C03'
569
I_FACTTAB = '/BIC/EZPSD_C03'.
570
571
572
EXEC SQL.
>>>>>
INSERT INTO "/BIC/EZPSD_C03"
574
( "KEY_ZPSD_C03P"
575
, "KEY_ZPSD_C03T"
576
, "KEY_ZPSD_C03U"
577
, "KEY_ZPSD_C031"
578
, "KEY_ZPSD_C032"
579
, "KEY_ZPSD_C033"
580
, "KEY_ZPSD_C034"
581
, "/BIC/ZNET_ASP"
582
583
SELECT :i_pdimid_normal
584
, F."KEY_ZPSD_C03T"
585
, F."KEY_ZPSD_C03U"
586
, F."KEY_ZPSD_C031"
587
, F."KEY_ZPSD_C032"
588
, F."KEY_ZPSD_C033"
589
, F."KEY_ZPSD_C034"
590
, SUM( F."/BIC/ZNET_ASP" )
591
FROM "/BIC/FZPSD_C03" F
592
WHERE F."KEY_ZPSD_C03P" = :i_pdimid
Any thoughts would be helpful,
Thanks,
David

This error usually occurs when there is a database lock or no space in teh database. Got DB02 and Click on Space critical objects to see whether any entries are there. If yes contact your basis to increase the space.
Hope this helps
Thanks,
Satish

Error : Logical System is not defined

Hi Experts,
I have installed SAP CRM 7.0 IDES . But when i am trying to exectute Transaction Code /nbp ( Business Partner Creation) system is giving an error 'Logical System is not defined ' and i am not able to execute the transaction.
Kindly explain how to define the logical system.
Regards,
Rohit Tripathi

Hello Rohit,
To solve the problem you should proceed as described in the long text of the error message B2 001 and maintain the logical system for the current client via transaction SCC4.
The reason for this error is that the ALE outbound of business partner is activated. If you don't want the ALE messages to be generated when business partner is changed then you can disable the ALE outbound. To do that, go the maintenance view CRMC_BUT_CALL_FU and disable the following function modules if active:
BUPA_OUTBOUND_REL
BUPA_OUTBOUND_ALE_REL
I hope this could be helpful.
Best regards,
Maggie

2011 macbook pro OSX maverick, error: storage system verify or repair failed

Hi there,
My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
I also get: error, storage system verify or repair failed.
S.M.A.R.T staus is verified
None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
Any ideas???

I have the same issue. Not able to fix it.

Error moving system to reiser4

Similar Messages

Maybe you are looking for