Error Mrp: Total Planning Run stopped due to 25 Terminations of 202 Matls

Hi
We are trying to run the Mrp Job I.e steps (RMMRP00) with variant PLVH_NETCHNG)..
I have 1 db server and 2 apps servers and it the starts to run for about 2 minutes and then crashes with the ffg error:
Total Planning Run stopped due to 25 Terminations (dumps)of 202 Matls.
Apps Guys says its a basis issue and i cant see an issue.
ANy help will be appreciated

Hi,
Please check the MRP setting some times we define mrp value upto 3-4 decimal and our setting upto 2 decimal points. If you send error log then that will be helpful for us to see the exact problem in the dump.
In case you want to send this by mail send [email protected]
Regards,
Anil

Similar Messages

MRP Total Planning in Back Ground job(RMMRP000) Doesn't work

Hi Gurus
I set a background job for Running MRP (RMMRP000) but it doesn't work but when I run MRP for products one by one,it works.
Does any one know about Why it operates such a way and if it need Specific Setting in Customization.
Thanks
Babak Bolourchi

hi
check whether these sap notes can help
704310 ATP server not supplied in background total planning run 14.09.2009
104475 Performance 'deliv completed' indic for purch ord (ATP_EKET) 23.06.2009
354310 MOD MD01: Planned delivery time from outline agreement 18.05.2009
1308329 Runtime error COMPUTE_FLOAT_ZERODIVIDE in program SAPLM61U 20.02.2009
150774 FMM: Update terminations when updating from MM 20.11.2008
1177408 MRP run with scope of planning generates TABLE_INVALID_INDEX 13.06.2008
1176611 Cross-plant material status ignored during AFS MRP run 06.06.2008
23278 MD01, MDBT: Performance during MRP run

Total Planning run (Scope of Planning)

Hello All
I am having a scenario wherein under a plant there are three divisions A, B & C. Divisions A & B falls under PP but Division C falls under PS. Now what I want is that how to plan the first two divisions A & B with total planning, cos i dont want to include Division C as for this division MRP would be run at Project level. Do I have to create MRP areas for these two Divisions A & B? Can you guide me out of this issue. Your inputs and guidance shall be appreciated.
Regards,
J K Tharwani

Thanks for your input YMReddy & Dharma,
I shall explain this thing again that there is a plant 1200 in which I am having three division A, B & C. C-Division is under PS, & Divisions A & B are under PP. What I want that I have to plan the materials under PP seperately under the total planning, becuase for Division-C MRP is run for Project.
I intended that I would create the different MRP Area for Division C, becuase by doing so at plant level this MRP area would be not considered, and when am running MRP for the plant 1200, it would only consider remaining Divisions A & B.
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
Please let me know if am going in the right direction. Waiting for your valuable inputs.
YMReddy please throw some more light on the inputs you have provided, and I would appreciate if you look into the input which am thinking of and provide your inputs as well, as in why it wont be useful this way. Your inputs shall be highly appreciated Thanks again YMReddy.
Regards,
J K Tharwani

Error - Background Processing: Planning Run

Hey Guys,
I want to schedule a background planning run. The report /SCMTMS/CL_TS_VSR_BGD is terminated
because of the following error. Has anyone an idea how to solve this issue?
Kind reagards,
Christian
Error in the ABAP Application Program
The current ABAP program "/SCMTMS/VSR_OPT_BGD" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"/SCMTMS/CL_TS_VSR_BGD=========CP " in include
"/SCMTMS/CL_TS_VSR_BGD=========CI " in
line 42:
"Direct access to the components of the global interface /SCMTMS/IF_SRV"
"MGR_TYPES is not allowed (INTERFACE /SCMTMS/IF_SRVMGR_TYPES LOAD state"
"ment is missing)."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SANNG "
Error in the ABAP Application Program
The current ABAP program "/SCMTMS/VSR_OPT_BGD" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.

Can you refer the following SAP Notes will help you to resolve your problem.
1230638 Memory consumption for VSR planning run too high
1285772 Planning: Write application log from VSR batch reports
1279704 Planning: Various performance improvements

Error while production planning run

Hi,
I got this error "No gap for activity ||| found within the planning horizon" during production planning run.
Diagnosis
    There is not a large enough gap for the activity ||| on the mode
    1- in the planning period specified in the time profile.
System Response
    The system does not schedule or reschedule.
What could be the reason for this error ? Kindly help.

Hi,
   One reason could be the Time Bucket.
Please check your time series assigned for production planning run.
Check the PPMs and maintain the scheduling data .
Please let me know that whether you have transferred the data from R/3(Materials, WorkCenters, BOMs,PPMs) or you are doing manually in APO.
Let me know then i can tell you the right approach.
Regards,
Santosh

How to Check Error Log for Supply Planning Run

Hi All
I am getting error in supply planning run. I see the status under Excel Add-in >Supply Planning > Status. However there is no detailed error message here
How can I check the detailed log of this error to understand what is going wrong.
Can anybody guide on what can be probable causes of the error
Any help is highly appreciated
Thanks
Vijay

Hello Vijay, Wade
Can you run the Supply Planning in Simulation mode? Under the simulation drop-down you can also see 'Show Message'.
Open it after your planning run to see list of any data inconsistencies.
Thanks
Pramod

Regenerative planning run in APO

Hi experts,
I need your input on the following scenario.
We have APO PPDS implemented for our Manufacturing industry client. We have designed to run only Net Change Planning every day and there is no design to run Regenerative Planning.
What is the importance of running Regenerative Planning? What do we lose if we don't run a regenerative planning?
We have CTP scenario, so there are lot of parts planned automatically.
Is there any impact of automatic planning on Regenerative planning and vice versa?
What is the best practice to follow with respect to Regenerative Planning?
I appreciate if someone could answer these questions. Thanks in advance.
Regards,
Manimaran M.

Hello Mani
Following are details are from old SAP Handbook, good information to understand the concept.
====
Net Change Planning
Automatic material requirements planning is especially hard on system performance for production processes with complicated BOM structures. To guarantee frequent planning runs of those materials which are relevant for planning despite this problem, you can carry out the planning run with the "net change planning" procedure. This process only plans those materials which have undergone a change relevant to material requirements planning (for example, change in a production order due to excessive scrap, a new sales order, and so on) since the last planning run.
The so-called planning file exists especially for the planning run and contains all the materials and their respective MRP types. If a material is changed in a way that is relevant to the planning run, it is given a net change indicator meaning that it will be included in the next net change planning run. In a net change planning run, only these materials are planned.
Net Change Planning in the Planning Horizon
Performance can be improved even further by using the net change planning run in the planning horizon. Here, only those changes relevant to requirements planning that fall within a specific period (defined by the user and known as the planning horizon) are included in the planning run. It is advisable in this situation to carry out a total planning run in regular intervals (for example, weekly or monthly) to keep the planning results completely up-to-date.
Regenerative Planning
It is also possible to carry out a regenerative planning run. In this planning run, the system plans all materials that are relevant for planning. Usually, the regenerative planning run is only carried out in the implementation stages.
===
Hope this will help.
Thank you
Satish Waghmare

No Planning happening with scope of Planning for total Planning

Hi SAP Gurus,
The Scenario is for Consumption based planning and MRP run.
I have created a New Entry under Scope of Planning for total Planning run and entered the required two plants under sequence of Plants.
I have also entered manually consumption values for trial materials in those two Plants. I maintained MRP and Forecast View.
I then ran MD01 using the Scope of Planning created. But when I check the MD04 results for trial materials, no Planning has happened.
I shows a message "Pl carry out Forecast for material xxx in Plant xxx "
Then using T.Code- OMDO, I created a variant for each Plant and also Scheduled. But after then also with MD01, No planning is happening.
When I check under T.Code - OMDU, the respective Plants were activated
Pl guide me the steps for Creating of Scope of Planning and then how to set up planning file and what could be the reason materials are not getting Planned.
thanks and regards,
R.Velmurugan.

Dear Mariano,
MRP type VV (forecast based Planning) is used for these materials.
I defined Scope of Planning for Total planning and included Plants in sequence.
Then I created new Variants for Planning file entries for these Plants (T.Code - OMDO).
Then I created new Variants for Planning file entry consistency for these Plants (T.Code - MDRE)
After then I executed Mass Forecast (T.Code - MP38) and then carried out total planning run using T.Code - MD01.
Now the materials are getting planned.
I missed Forecast run earlier.
I found the reason for the problem, hence closing the thread.
Thanks to Mariano and Daniele for your inputs.
Regards,
R.Velmurugan

Restrict group of articles in a total planning while using reorder point pl

Hello Experts,
Iu2019m in the process of setting up MRP for my customer. I have about 70 plants in the system and roughly 14.000 articles. Not all articles are planned in all plants but in at least one plant all articles are.
Some articles need to be planned every day, others only ones a week. We are planning to use automatic reorder point planning.
Do I understand it correct, that when I do a total planning in the back ground the planning calendar will only be taken into account when I do time phased planning? In other words, all articles will be planned every planning run when I do a total planning using reorder point planning?
IIf my understanding is correct, is there a way to restrict the group articles in a total planning run while using reorder point planning?
Kind regards,
Rudy

The MRP run is executed either at plant level or MRP area level
And all materials within such level (which do not have the ND) are considered in the MRP run.
It is is possible to exclude materials or restrict the MRP run based on a user exit (see the user exit field in the lower part of MRP run selection screen)

Recursion in planning run: product T-B104 location PL1000 to be planned twice

Dear experts,
Please advice regarding the following situation. I execute the Production Planning Run. After this, I check the log and I get the following error : "Recursion in planning run: product T-B104 location PL1000 to be planned twice". Based on previous posts regarding similar situations, I run the trx. /SAPAPO/SNPLLC to identify the existing cycles resulting in the recursion of the planning run. After this, in the log I have the following error: "no supply sources were found for the model 000".
Does anybody have a clue regarding the cause of this ?
Thank you,

Hi,
This should be probably master data - please check if you have all the master data in APO. ( for eg PDS)

Error occurred during CTM planning run

Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
Khadar

Hi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran.

XML import - stopped due to "critical error"

Hi all. For the moment, I'm still working with FCS1/FCP 5.1.4, OS 10.4.11.
In the past, when I've needed to open a project I've started on other machines running 6.0.x, I've done an XML export, and imported said xml file into a new project on my machine. If I recall correctly, XML type 2 worked just fine.
Well, it doesn't work now, and I'm wondering why?
The machine I'm exporting from is running OS10.4.11, and FCP 6.0.3. I've exported the project out of there in all flavors of xml (1,2,3 and 4), with and without clip metadata. And I get nothing on import, bupkus, nada, zilch and zero...except for the oh-so-helpful message "XML import stopped due to critical error"
So who broke this?

I've had this happen to me when the original project contained sequences that used filters not supported by 5.1.4.
My solution was to strip out suspect filters until it worked.
Best,
Tom

Account information not recognized: Could not reach CMS ' MachineName :6400'. The CMS on machine ' MachineName ' was stopped due to a critical error. (FWM 20031)

I have just installed Information platform services 4.1 sp2 on a windows server 2008 R2 standard service pack 1. having 8 GB RAM.
Central Configuration manager is in Running status but when I try to login to Cental management Console then I get following error
"Account information not recognized: Could not reach CMS '<MachineName>:6400'. The CMS on machine '<MachineName>' was stopped due to a critical error. (FWM 20031)"
I have CMS and AUDIT database on Oracle server and they are getting connected from my machine through SQL developer and the tables are also created under CMS and audit databases.
I am not able to figure out what Issue is causing the Error. Below is the content of error_cms6400.log file located in the directory <E:\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\logging>.
33007
CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)
35101
The root server reported an error Initialization Failure. (Reason: CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027) CacheObjectIDs ).
I have created New databases for CMS and audit and it is saying database is overloaded.
Please help me rectify the Issue.
Thanks in Advance

Hi Ankur,
As per the error message you entered the issue might occur because the Oracle CMS database reside in a different network or there is a network delay between BO server and database server. Please refer KBA 1706849 and try following steps.
Confirm that the CMS database and BO server are in same network
Try to ping database server from BO server and check the reply. The reply should come in 1 ms
Confirm with DBA whether there are 14 connections established to CMS database
Stop the SIA and restart your database schema. Then start the SIA and try login
Please let us know error messages in Event viewer if this is a Windows server and also is this a clustered environment ?
Regards,
Hrishikesh

Planning Run - Enhanced Backward Scheduling Error

Hi SAP Expert,
I encountered planning run error "Heuristic terminated due to a possible endless loop" after I run the planning run via transaction /SAPAPO/CDPSB0 - Production Planning Run with heuristic "Enhanced Backward Scheduling".
Do anyone have any idea on it?
Thanks.
Regards,
Hooi Chia

Hi All,
This issue had been resolved. I'm now close this issue.
Regards,
Hooi Chia

Bsod Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

I have a t540 with all hardawre and software updates running Win 7/64 pro and get this message repeatedly. Microsoft says to delete MSSEOOBE.etl but that file doesn't appear to be in the 64 bit version of Microsoft Security Essentials
If it happen when the PC is in SLEEP mode it causes an abnormal shutdown/recovery when the PC restarts Did uninstall and reinstall MSE
One MS thread says to contact the OEM - so here I am.
I was also getting Code 10 Disk Errors but there was a MS KB fix for that
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/29/2014 8:39:03 AM
Event ID: 3
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: bill-THINK
Description:
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
 <EventID>3</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>2</Task>
 <Opcode>14</Opcode>
 <Keywords>0x8000000000000010</Keywords>
 <TimeCreated SystemTime="2014-05-29T13:39:03.627614300Z" />
 <EventRecordID>209</EventRecordID>
 <Correlation />
 <Execution ProcessID="4" ThreadID="212" />
 <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
 <Computer>bill-THINK</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data Name="SessionName">Microsoft Security Client OOBE</Data>
 <Data Name="FileName">C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl</Data>
 <Data Name="ErrorCode">3221225485</Data>
 <Data Name="LoggingMode">5</Data>
</EventData>
</Event>
Any thoughts? I guess I will try another AntiVirus but Microsoft Security Essential is running on 2 other Win 7 laptops
Thanks

Hi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support

Error Mrp: Total Planning Run stopped due to 25 Terminations of 202 Matls

Similar Messages

Maybe you are looking for