ERROR MSG 1607 / WINDOWS XP INSTALLATION

I JUST PURCHASED THE NANO ON MONDAY. I'VE SPENT OVER 8 HOURS TRYING TO INSTALL THE SOFTWARE AND KEEP GETTING ERROR MSG 1607. I FOLLOWED THE TROUBLESHOOTING TIPS AND TRIED EVERYTHING TO GET THIS SOFTWARE INSTALLED...NO LUCK. IT'S GOING BACK TO APPLE ON FRIDAY IF I CAN'T FIGURE THIS OUT?!?! THANKS FOR ANY ASSISTANCE!! HD

Thanks for the new insight. I followed the instructions on the link you provided, but guess what?? I did everything it said to do...and when I was on the final step (start>run>msiexe/regserver) it said the file is not found??? OK...I'm really losing my patience because I've thoroughly read and applied all the options given for error 1607 in the discussions on apple's web page and on installshield's webpage. Now what? What does is mean if it says that file isn't found?
Thanks for any assistance out there ~hd

Similar Messages

How do you fix error msg for Windows IE v8 SP3 invalid drive: J\ when installing Reader?

I have tried to install the latest version (and two older ones shown on Adobes install free Reader webpage) onto Windows IE 8 sp3 get error message Invalid drive: J\, or Folder path "My Pictures" there is invalid character. I have been unable to correct these to allow Reader to install without errors. Get to 96 % installation then these messages appear but not at the same time. Any suggestions?

See http://support.microsoft.com/kb/894510

ThinkPad Yoga Synaptics TouchPad Error msg on Windows 7 startup and loss of gesture functions

I fresh installed Windows 7 Ultimate on my ThinkPad Yoga after getting fed up with windows 8.1. I now get the following error msg on each startup and the trakpad features do not work:
"synaptics touchpad 64-bit enhancements has stopped working"
I can use the mouse but non of the gestures work. I have not been able to find any other posts with similiar issues on the Yoga so any help on this would be most appreciated. The device driver installed was taken from the lonovo site and is the "Synaptics ThinkPad UltraNav. Version 18.0.7.34 (N10GX08W)"

Just when I was happy that major issues have been resolved by constant updating, I am now experiencing this frightening problem. Mostly during startup, and lately in the middle of working, the screen freezes, shows very damaged image (like TV noise), produces the most unpleasant sound through the speakers and nothing works. I need to restart and hope that it will be ok. Sometimes it requires 2 or 3 restarts, going to safe-mode and returning back to get the issue resolved.
This has happened three or 4 times within 24 hrs. I searched in the forum and for another model it was suggested that epresscache might be the cause. I disabled the service, but the problem reappeared even then.
Any help please:
This is what appears on the screen when the computer freezes and produces loud unpleasant noise sound.
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Windows error msg

I have recently received an error msg stating: Windows cannot access the specified device, path, or file. You may not have appropriate permission to access them." because of this I could not open any app on my pc. I am running windows 7 ultimate. When
I allowed window to run in safe mode I was looking for the Windows Repair recovery command but it did not appear. After many attempts using ctrl+F8 and ctrl+f11 I finally got the command back. Is there a better way of obtaining this command? Also,
it did fix my problem but I don't know why it happened in the first place. All I can think of is the beta program of ZoneAlarm Extreme that I installed on my pc 2 days prior. Any help would be appreciated.
thanks,
joseph1a

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Installation CR2008 trial error message in Windows 7.

Hi,
Current window : Windows 7
I have install crystal report 2008 trial version in windows 7 and the error message:
1) When i open my project in vb6 error msg : c:\windows\system32\crystl32.ocx could not be loaded -- continue loading project?
2) then i went project,component and select the crystl32.ocx error message(Crystl32.ocx was not registerable as activex component).
please assist.
Thank you.

Hello,
The OCX was retired about 10 years ago. In CR 2008 your only option is to use Crystal Reports .NET Assemblies and move to Visual Studio .NET 2008.
Moved your post to the Legacy SDK forum
Don

I have a problem with HP ToolboxFX and the encountered an error and can not recover error msg.

Restarting the software and/or the computer do not fix the error. I have installed the new firmware in my CP2025dn Color Laser it now has version 20110212 firmware. The error msg reports: windows version Win32NT-6.0.6002.131072 and HP Toolbox FX version 004.012.00146. I am running the printer on my wireless router. My computer is a Dell Studio with Vista Home Premium Service Pack 2 - 64 bit OS. My wife's older laptop with WIN XP is not having a problem with Toolbox. I have uninstalled and reinstalled Toolbox on my computer today also. Where do I look next? Thank you!!!

Hi
Please find the link given below might help you to fix your issue.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package anyone got any ideas how to fix this?

i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?

There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit***

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

HT1926 trying to download itunes 10.6 on w7 64-bit, getting error msg: this installer has insufficient privileges to access this directory: C:\program data\microsoft\windows\start menu\programs ITunes. Log on as administrator. (I already am!)

Can't install latest itunes. error msg: "This installer has insufficient priviliges to access this directory: C:\ProgramData\Microsoft\Windows\StartMenu\Programs\ITunes. Log on as administrator or contact your system administrator." I am logged on as administrator and have been since i've owned this laptop. Any suggestions?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue earliest.

Hi Guys
I have an issue please help on that earliest.
When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue immediately.
Regards,
Shiv

Is this a clean install or an upgrade? 20 GB, though greater than the minimum, is pretty minimal. How much memory do you have on the system? 2008 would try to create a page file of 1.5x physical memory, so if you are building on a large
memory system, you could be having an issue there.
"Pls resolve this issue immediately"
Forums are not for support. They are monitored by people, like yourself, who are willing to take time out of their days to provide the benefit of their past experience. If you need support, you need to purchase a support contract from Microsoft
or some other party.
. : | : . : | : . tim

ITunes no longer works on my Windows VISTA system. Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Windows Vista Installation Failed. Error Restart Loop After Install.

I made it as far as the end of Step 2: Partition for Windows Vista -> Format -> Install -> Restart
Note: Partition size = 45 GB. Apple USB keyboard and mouse worked fine.
The install process was stuck in a loop at this point. After restart the screen was black for about 5 minutes. Disc made noise off and on but no screen input. Then it finally restarted. Next screen had error info and a choice to continue. After that a "Install Windows" error msg appeared;
+"The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart the installation."+
Clicking "OK" resulted in the same error msg. along with +"Press any key to boot from disc"+. No success attempting to start up from Windows partition. or disc. Restarted to Mac HD. There is a "Untitled" drive on the Desktop. It contains multiple folders (11 GB). I tried to restart from this drive w/o Windows disc and it returned to the previous error msg.
Next I tried restarting w/ Option key, inserting Windows disc, clicking on arrow under disc icon and quickly pressing any key. This brought up +"Windows Boot Manager Window"+. The only choice was; +"Windows set up [EMS Enabled]. To specify an advanced option for this choice, press F8. Tools: Windows memory diagnostic.+" None of the key choices (Enter, Tab, Esc) responded. Disc would not eject.
Booted to Mac HD. Ejected disc w/ mouse. Used Boot Camp to restore partition. After restart screen is black with; +"No bootable device -- insert boot disc and press any key".+ Then I power down/on with Option key. Only Mac HD is displayed. Log into Admin. Mac HD looks fine. Run Disk Utility to verify disk/volume. OK. Also ran TechTool Deluxe. Passed. Open System Preferences, check that Mac HD Startup Disk is highlighted. Restart. OK now.
What is going on? I was quite confident this would install without any problem since I was using the latest OS X 10.5.6 and Windows Vista Business (early version). Could that be the cause? I had no problem installing it under VMware Fusion 2 (downloaded updates), worked flawlessly. If I can't get this to work then I have to go back to a PC for ACAD. HELP!!
Can I get Apple Support for this issue (Phone only, or Genius Bar)? I have AppleCare.
Message was edited by: Sakahara
Message was edited by: Sakahara

Your problem sounds somewhat like mine, although not exactly. In my case it seems as if my CD/DVD drive didn't like the hologram on my Windows XP install CD. I solved this by using Disk Utility to make a disk image of the Windows DVD and then burning the disk image onto a new DVD with an opaque "label". That solved that problem.
A further problem occurred after that. When I got to the screen that told me to hit "Enter" to start the installation process my keyboard was unresponsive. I solved this by buying a cheap Windows keyboard. That solved that problem and I now have Windows XP running just fine.
I think that you'll find that Apple tech support isn't very responsive to these sort of problems. I don't have Apple Care but was willing to pay my $49 for tech support. I ended up talking to a "Boot Camp specialist". He was polite but told me that it was "a windows problem" and that Apple didn't support Windows. I agree that Apple can't support windows but it seemed like my two problems were "Mac problems". Anyway, after tearing my hair out for 4 days I finally got it done. I have to admit that I'm not happy with apple tech support.

Not able to install Adobe Flash Builder in windows xp 32 bit OS. Getting error msg 64 bit required.

Hi All,
Not able to install Adobe Flash Builder 4.7 in windows xp 32 bit OS. Getting error msg 64 bit required.
Pls help me for installation.
thanks in advance.

You don't have service pack 3 most likely. Refer to the tech specs:
http://www.adobe.com/products/flash-builder/tech-specs.html
Mylenium

Windows 7 PC error msg when trying to (re)install Adobe Reader

After manually cleaning up my HD to make room, I'm thinking that could be the reason, but I don't remember uninstalling any Adobe products. The error msg is as follows: "Windows installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update". Please help me workaround this to install it properly. Thx

I suggest that you uninstall any remains of existing Reader versions using http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the installer from http://get.adobe.com/reader/enterprise/

ITunes 10.2.2 won't install - Error message about Windows Installer package

I ran a prompted update on iTunes for 10.2.2 for Windows Vista, and it completely wrecked itself. iTunes would no longer open, and it said that the shortcuts no longer existed.
I have tried uninstalling iTunes and all traces of it, and re-installing it, but keep getting an error msg that says "Problem with this Windows Installer package. A program required could not be run." I even tried a previous version of iTunes (10.1) and got the same error.
Can anyone help with this?

I had the same problem with updating my itunes. I spent hours trying to figure out how to fix it
After updating my windows 7 and fixing all the "corrupt" files, what seems to finally work for me was this
Go to add or remove programs in the control panel, on Windows 7, just go to start, control panel, and then uninstall a program. Find Apple Software Update on the list, and click on repair. Once that is done, try to download iTunes again and it should work.

ERROR MSG 1607 / WINDOWS XP INSTALLATION

Similar Messages

Maybe you are looking for