Error msg clean local gpo
hello ppl
when trying to clean my local gpo with the command:
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb
/verbose
i get this error msg:
An extended error has occurred.
The task has completed with an error.
See log %windir%\security\logs\scesrv.log for detail info.
error log details:
----Configure File Security...
Configure c:\program files\common files\speechengines\microsoft\tts.
Warning 2: The system cannot find the file specified.
Error setting security on c:\program files\common files\speechengines\microsoft\tts.
Configure c:\programdata\microsoft\windows\drm.
Configure c:\programdata\microsoft\windows\drm\cache.
Configure c:\windows\repair\default.
Warning 3: The system cannot find the path specified.
Error setting security on c:\windows\repair\default.
Configure c:\windows\repair\ntuser.dat.
Warning 3: The system cannot find the path specified.
Error setting security on c:\windows\repair\ntuser.dat.
Configure c:\windows\repair\sam.
Warning 3: The system cannot find the path specified.
Error setting security on c:\windows\repair\sam.
Configure c:\windows\repair\security.
Warning 3: The system cannot find the path specified.
Error setting security on c:\windows\repair\security.
Configure c:\windows\repair\software.
Warning 3: The system cannot find the path specified.
Error setting security on c:\windows\repair\software.
Configure c:\windows\repair\system.
Warning 3: The system cannot find the path specified.
Error setting security on c:\windows\repair\system.
Configure c:\windows\system32\windows media.
Warning 2: The system cannot find the file specified.
Error setting security on c:\windows\system32\windows media.
File Security configuration was completed successfully.
----Configure General Service Settings...
Configure sysmonlog.
Error 1060: The specified service does not exist as an installed service.
Error opening sysmonlog.
Configure SamSs.
Configure ntmssvc.
Error 1060: The specified service does not exist as an installed service.
Error opening ntmssvc.
Configure netddedsdm.
Error 1060: The specified service does not exist as an installed service.
Error opening netddedsdm.
Configure netdde.
Error 1060: The specified service does not exist as an installed service.
Error opening netdde.
Configure dmserver.
Error 1060: The specified service does not exist as an installed service.
Error opening dmserver.
Configure clipsrv.
Error 1060: The specified service does not exist as an installed service.
Error opening clipsrv.
Configure Browser.
appriciate answer.
Hey Navachu
Thanks for posting ,
As you mentioned the error msg occurred to the secedit.sdb file,
Please follow the actions below:
1. Delete file: secedit.sdb from c:\Windows\security\database
2. Reboot machine.
3. Run the command again: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb
/verbose
4. Reboot machine.
5. Run Gpupdate /force
6. Check your new GPO Settings.
Notice for any changes.
I'd be glad to answer any question
Similar Messages
-
ERROR MSG DURING ATTEMPT TO SAVE A QUERY ON LOCAL
Hi Experts,
Kindly help me out
ERROR MSG DURING ATTEMPT TO SAVE A QUERY ON LOCAL
status message : Errors: Authorization change not available for queryHi Surendra,
Nw while i executing this query in production system
Error i gt: 1. Infoprovider was changed or activated at runtime
2. system error in program CL_RSD_Multiprov and form GET_PART_IOBJNM_CMP_01
Kindly give me some inputs
Thnks
Sinu -
.mac sync error msg "attempt to insert nil value
I've been trying to reset .Mac sync, and I keep getting this error msg
*(NSCFDictionary setObject:forKey:]: attempt to insert nil value
what is this?A bug; probably the result of a corrupt schema. If you really want to wipe the slate clean you can get rid of ~/Library/Application Support/SyncServices/Local, but you should make sure you have a backup handy just in case you lose something you care about in the process.
-
How to get Error Msg from A step in TestStand into a variable (with Record Result disable)
I have disable "Record Result" in a step (action) that call a Labview VI (Minimise memory usage during long run).
But I want to capture the error msg and put it in a local variable (locals.log).
So in the "Post Expression" of that step, I add:
locals.log = step.result.error.msg
But it always an empty string, Is the post expression executed when the there is an error in the step ?
So How can I capture it ?Hi,
The trouble is that when a step errors, the Post Expression doesn't get executed.
Try using one of the Override callbacks - SequenceFilePostStepRuntimeError, ProcessModelPostStepRuntimeError or StationPostStepRuntimeError.
There is an example in the Examples\Callbacks.
The Step properties are passed as a parameter to the callback so you can get the error message and do your logging.
Hope this helps
Ray Farmer
Regards
Ray Farmer -
Error msg is generated when attempt to crop a TIF that included a 3rd party filter not on
local machine. (Windows 7 Professional SP1)
1. File created in CS5 with third party filter applied to smart object (filter:Neat Image
published by ABSoft.)
2 Transfer to another computer that does not have the filter installed.
3. Open in Photoshop CS6.
4. Use crop tool to attempt to crop the photo.
5. Receive error message "Could not complete the command because of a program
error."
6. Crop completes and can be saved, but filter is disabled and cannot be enabled unless
moved back to original computer.
Expected result should be:
Allow filter to be enabled as CS5. Or message similar to message produced with
missing font.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer,
SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 1995 MHz
Built-in memory: 6051 MB
Free memory: 2949 MB
Memory available to Photoshop: 5290 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.6744
Driver Date: 20110301000000.000000-000
Video Card Driver:
nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\wayne\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 450.2G, 387.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64
Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012
18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build
gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build
gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;
BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112
0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONESee if you can troubleshoot Safari extensions and third party plugins before Safari crashes.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here. -
Clearing local gpo to a blank slate...
Hello,
I've been wondering if it is possible to clear a local gpo to the windows defaults (like if the machine was freshly installed and never had gpo's applied)?
Prior to using ZEN to push gpos, we had manually set gpo on each machine. Once using ZEN, these already in-place gpo settings got merged with new settings being pushed out from ZEN. At times when ZEN would fail to apply those ZEN gpo settings, it would revert to the previously in placed gpo settings.
Example: Prior to using ZEN, we had set our WSUS environment settings via the local gpo. After using ZEN, we had moved our WSUS to a new server and had to change the settings on our clients. Using ZEN, we pushed a gpo with these new settings. That works until the machine doesn't apply these ZEN gpos properly or at all at times, thus reverting them to the old/previous local gpo settings that contained the now invalid WSUS settings. Machines stopped getting updates, etc...
So would it be possible to completely wipe or reset to windows default the local gpo settings, so that we can push fresh, correct gpo from ZEN instead?
I hope that makes sense.
Thanks,
LKOn Logoff and Shutdown, ZCM will restore Original Settings that were on
the device when the agent was installed.
These are stored in %zenworks_home%\bin\cachefiles\something (Don't
recall exactly w/o looking, but its obvious once you are down that far.)
You can replace those with copies from a clean PC.
On 3/8/2013 4:26 PM, leonkrown wrote:
>
> Hello,
>
> I've been wondering if it is possible to clear a local gpo to the
> windows defaults (like if the machine was freshly installed and never
> had gpo's applied)?
>
> Prior to using ZEN to push gpos, we had manually set gpo on each
> machine. Once using ZEN, these already in-place gpo settings got merged
> with new settings being pushed out from ZEN. At times when ZEN would
> fail to apply those ZEN gpo settings, it would revert to the previously
> in placed gpo settings.
>
> Example: Prior to using ZEN, we had set our WSUS environment settings
> via the local gpo. After using ZEN, we had moved our WSUS to a new
> server and had to change the settings on our clients. Using ZEN, we
> pushed a gpo with these new settings. That works until the machine
> doesn't apply these ZEN gpos properly or at all at times, thus reverting
> them to the old/previous local gpo settings that contained the now
> invalid WSUS settings. Machines stopped getting updates, etc...
>
> So would it be possible to completely wipe or reset to windows default
> the local gpo settings, so that we can push fresh, correct gpo from ZEN
> instead?
>
> I hope that makes sense.
>
> Thanks,
> LK
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
error msg reads as followsrint cartridges missing or not detected
HP developers refer to the ink cartridge as a "pen".
Please read this post then provide some details. What printer model? What operating system? Cleaning the cartrdige contacts as shown in this document may resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Hi Guru's.
when i'm trying to run a query on 0COOM_CO2 cube, the system is throwing a error msg.
error msg:
No value could be determined for variable 0P_FVAEX.
Message no. BRAIN632
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or
0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for
an entry for 'controlling area'. With this controlling area from the
selection screen, the SAP-Exit-Variables program reads the attributes
for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX
looks for an entry for 'company code'. With this company code from the
selection screen, the SAP Exit Variables program reads the attributes
for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from
the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries).
0P_CTPCA determines the currency type of the profit center local
currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company
code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the
attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display
the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction
se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and
'profit center local currency currency type' (field CURTP_PCA) are
filled in the 'A' version (field OBJVERS) for the selected controlling
area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the
error is with variable 0P_FVAEX. If the currency type of the profit
center's local currency in OBJVERS = 'A' is empty, then the error is
with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field
FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected
controlling area. If the fiscal year variant is empty in OBJVERS= 'A',
then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area
or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do
this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes',
functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or
0COMP_CODE from this list, and activate the attribute changes.
Procedure for System Administration
where do i start to debug it.
Thanks in advance,
MavThe variable 0P_FVAEX fills the fiscal year variant based on the following checks in the order:
1. If you have a variable for 0CO_AREA the system looks into the first entry and determines the attribute 0FISCVARNT of 0CO_AREA.
2. The same for 0COMP_CODE.
3. Check if there is a variable for IM Program hierarchy and look for 0FISCVARNT.
4. Check project data for fiscal year variant.
5. Check CO area of the asset.
6. Get Fiscal Year variant from Oracle company(!)
7. Get FY variant from Oracle company code.
8. Get FY variant from Oracle organization.
So you need to use one of these info Objects in your variables.
Best regards
Dirk -
I can't receive my incoming mail in Mac Mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution? I am able to get my incoming messages via yahoo website but not through the Mail app.
Try this, if it is not the correct department, ask them for the number or to be transfered..
Call 1-800-318-0612 for Login Help
Also on most autmated systems, if you hit 00000, or ##### you can sometimes get thru to a person.
Is Yahoo your Internet provider? Do you have a local provider? ei:AT&T, SBC, cable co, check who you make your check or epatment to...etc, If so I would start there, but if no joy go to the "Mothership"
I may be wrong about this, (it's been a long time now) I may have deleted my mail account from Mail (after writing down all the info from all General/accounts, and the rest of the tabs, and then added a new account using my existing email address, and it may have "walked me thru the rest of the proceedure".
But like I said it was a long time ago 3-4 years, but that may have been the path I ended up taking, make sure to write all the info down in case you need to re-enter it all manually. Then try calling them.
All the best -
Error Msg - Flash Player & AOL?
Hi there-
Out of nowhere, I'm unable to run AOL anymore. I get an error
msg stating:
Macromedia Flash Player has stopped a potentially unsafe
operation.
The following application on your computer or network:
mad:\\105D710F-CC2A-4F90-87EA-E650C74BAFAD\default.htm
is trying to communicate with this Internet-enabled location:
spe.atdmt.com
To let this application communicate with the Internet, click
Settings. You must restart the application after changing your
settings.
... the choices are "OK" and "Settings...". When I click OK,
or the close X, the window disappears & then reappears in 15
seconds. Nothing happens when I click settings. WHAT is going on?
I've run every Virus checker & computer checker I have and have
found nothing. Do I need to uninstall Flash Player? I need AOL to
run my business! It was working find this AM and suddenly its not!
Thank you,
MelissaSam139 wrote:
> I'm having the same problem...just started today. Tried
the same fixes,
> nothing has worked so far. But I have been able to
continue to use my AOL mail
> by going to the AOL.com website and signing in there
(rather than using the AOL
> icon shortcut). The error messages haven't appeared
there so far.
As of 4/25/2006 Adobe Technical Support has become aware of
an issue
effecting AOL customers. AOL customers launching AOL's mail
application
receive a Flash Player security message "Macromedia Flash
Player has
stopped a potentially unsafe operation".
This is a standard Flash Player security warning. For more
information
and an example of the security warning, please read " How do
I let local
Flash content communicate with the Internet?"
http://www.macromedia.com/go/4c093f20).
Flash Player is performing as
designed, to protect users from unauthorized applications on
their
machines performing potentially malicious operations.
It is your decision whether or not you allow the application
to connect
to the internet. If you want to allow the connection, follow
the
instructions in the TechNote referenced above. If you do not
want to
allow the connection, simply click OK in the security message
window. If
you are unsure whether to allow the connection, you should
contact the
web site identified in the error message to find out what
application is
causing the message to appear, and determine if you wish to
allow the
operation.
In the following security message, the web site to contact
for more
information is atdmt.com.
"Macromedia Flash Player has stopped a potentially unsafe
operation The
following local application on your computer or network:
mad:\\03BEDE57-4A24-4ABB-8EA8-916A-DA14911\default.html
is trying to communicate with this internet enabled location
spe.atdmt.com"
This is not an issue that can be resolved by Adobe Technical
Support.
This is a content development issue on the AOL side. You can
choose to
trust the location in the error message, but you do so at
your own risk.
We've informed AOL of the issue and are relying on them to
repair it
with their content developers.
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
*Macromedia, now a division of Adobe Systems -
Windows 7 PC error msg when trying to (re)install Adobe Reader
After manually cleaning up my HD to make room, I'm thinking that could be the reason, but I don't remember uninstalling any Adobe products. The error msg is as follows: "Windows installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update". Please help me workaround this to install it properly. Thx
I suggest that you uninstall any remains of existing Reader versions using http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the installer from http://get.adobe.com/reader/enterprise/
-
Hi,
I'm using the correct apple id/pwd. I get this error msg:
ConnectionManager::invoke::Failed to find service connection url.
Too many tries forced me to change my pwd. Using new pwd, still getting that error msg:
ConnectionManager::invoke::Failed to find service connection url.
Am trying to re-download purchases I lost due to needing to do a clean reinstall to correct some mystery issue. I was able to re-download some such old purchases the other day--but not now.
Any help much appreciated!There is currently a system wide AppStore issue affecting certain users: http://www.apple.com/support/systemstatus
Nothing to do with your system in particular, it's a problem on the Apple servers. -
When I try to update my apps on my iphone, I get the error msg "App not compatible with this iPhone." I am able to download a new app. I have the latest software update. I have tried turning the phone on and off. Any other suggestions?
some updates leave old models or old iOS versions behind. That's the way technology evolves. You must then stick with last version that is working with it. ( they are locally in your Itunes music folder, under "mobile applications", good idea to back up these *ipa files - some time in the future they will not be available ). You can drag and drop the apps icons from within PC/Mac to the connected iPhone, that will re-install these locally versions on the iphone.
If you use iTunes AppStore from Mac/PC you can also read the system requirements on ech App's info box.
I would say more and more apps now will certainly require iOS5 instead of 4.x , and as more and more apps make use of Retina Display, the 3GS would be out - even with iOS5 on it. -
Error msg in attempt to download app update
Received error msg when trying to download update 3.1.2 to maccleanse - "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Is there a fix for this problem?
Most likely pirated software.
FYI... your Mac does maintenance for you. There's no need to download purchased or free so called "cleaning" utilities on a Mac.
If you have problems with your Mac, you will need to use Lion Recovery, not third party.
I did an ASC forum search for MacCleanse here. Way more negative input then positive. -
while trying to download adobe reader Error msg: already have a more productive application?
if you're using windows, click the start button>control panel>uninstall programs> and check for adobe acrobat and adobe reader. don't uninstall anything if you find it.
but if you find no acrobat/reader run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then try and install adobe reader.
Maybe you are looking for
-
Arch on the Asus 900 (EEE PC)
Firstly, I'd like to ask if anyone's had any success with installing arch on the asus 900 and if the steps they took while doing it differed from those in the threads/guide regarding the 700 found on these pages. Secondly, I've been poking around wit
-
Is it possible to program a form to send certain fields to a spreadsheet housed on a website upon submitting? I have created a simple spreadsheet with order number, change amount, and customer name. When sales submits this form to the person enterin
-
Any help please..?
-
Download report with chinese word into Excel
Hi all, I need to create a report with Chinese header title, how can I put in these chinese word in my report? And after all, I will need to download this report to Excel sheet. I 'm using function GUI_DOWNLOAD to download the report to excel, but th
-
Tax not calculating In FB60.
we are using Taxinn maintain plant/vendor/material in Fv11 for condition JVRD using single tax code V1. all VAT calculation for diffrent tax rate on single tax code. In MIRO vat tax calculating but not In FB60. We upgrade The PRD up pa