Error Msg: Express Document 'Update was Terminated' in VF02 t-code

Hi all,
When I click on save in VF02 transaction I am getting message that ' Express Document 'Update was Terminated' received from author 'XYZ'.
After saving when I am seeing in header -output the output type not appearing.
Please Help me Its an urgent requirement.
Regards,
vinod

Hi Vinod,
there is two reasons
1) Number range is not specied limit define billing document number range.
path- img sd- billing -define number range and see diffenettly i hope your problam willbe solved.
2) t.code NACE whether you have maintained the condition record or not check other wise please maintain it.
i hope you have understood
if your problam is solved don't forget to reward.
thanks& regards
surya

Similar Messages

Express document 'Update was terminated' in vf02

Hi Gurus,
I am getting Express document 'Update was terminated' error while triggerring customized
output type in vf02.
i found dump in st22 and describes as below.
Error analysis :
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
Pls kindly suggest me what could be the reason

Hi Sheshikanth,
you have an exit in the update section of the transaction VF02 calling one of those statements (CALL...). This is prohibited.
Go to SM13 and follow the error. You will find the code that is causing your problem.
regards,
Edgar

Earmarked funds - Express document "Update was terminated" error

Hi,
When i create a contract(RECN), a earmarked funds document getting created and it updates the table KBLK with single primary key BELNR.
I see in the Tcode OK60, the number range assinged is '05' - 0200000000 to 0299999999.
KBLK table has entries created from 0200000000 to 0299994311 which were created earlier.
From this financial year, when i am creating a contract, the new BELNR is started again from 0200000000 series, hence it throws an error message "Express document "Update was terminated" since entries are already exist in the KBLK table.
Finally i understand we have to change number range assignment.
Where can i do this? Please help if my understanding is wrong, how can i rectify this issue.
Thanks,
Bharath.

Hi,
U can change the number range for the contract for this fical year and make it start from 0299994312 to 0299999999.
But it seems u have already used most of the numbers, so go for a new number range for both the documents.
Hope this helps
Deepak

Error:express document "Update was terminated" received from author

Hi All,
I m creating shipment frm the transaction VL01.
While creating the shimpment i am assigning one Z output type and clicking on the planning phase on the shipment.
After that i am saving my shipment.
At this point of time my shimpmnet is created but after this(after saving the shimpment) if i am trying to do anything it is giving me the below error.
Express document "Update was terminated" received from author "Sachin Yadav".
Kindly help why i m gettng this error. How to remove this error.
Regards
Sachin

SAP is telling you that the transaction failed and a rollback has been executed, due to some catastrophic error in the system. These often arise from errors in exit coding....check ST22 to see if you can find anything...there may be a clue there....otherwise start looking at the changes you just made for the source of the error.
This error occurs, most likely, because during the actual save to database operation, or because of something in follow-on processing launched during the save step (like a new background task for form output or something like that) an fatal error is occurring and SAP is detecting that and rolling back the body of work that was just committed to the database.

Express document "Update was terminated" received from author "    "in VA21

Dear SAP Experts,
i just set up Output determination for quotation type. and created VA21, while coming out i am getting error
as Express document "Update was terminated" received from author "
below is the dump i am getting. Could you please help me to solve this?.
Update was terminated
Created       m8050032 on   06.01.2010   13:04:43
Update was terminated
System ID....   E6I
Client.......   800
User.....   M8050032
Transaction..   VA21
Update key...   DD95FADEFC90F19591EF001D0915C7EC
Generated....   06.01.2010, 13:04:42
Completed....   06.01.2010, 13:04:43
Error Info...   00 671: ABAP/4 processor: SYNTAX_ERROR

Hi,
Goto T.code ST22 - ABAP runtime error
click today button,
check for the error and double click to get the detailed long text
see "How to correct the error"
take a help of ABAPer
Regards
senya

Express document update was terminated in mm02

Dear experts:
                    when i use MM02 to change the material master,after saving,i get the error message'Express document update was terminated'.
                    The ID has working period of time and the authority is enough to do this,pls give some advice.
                    Thank you very much!

Hi Stephen,
This error message comes when ur transaction doesn't get the proper system resources or when the load on the server is too much. Becuase of which tables dont get update and u get the error .
basically it is performance issue of the system. U can try after some time if proble persists u can contact ur BASIS team.
Regards,
AM

Getting "Express Document Update was terminated" while creating BP..

HI All
I am creating Business Partner using HR Pernr using following BAPI's.
1. BUPA_CREATE_FROM_DATA - To create BP.
2. BUPA_ADDRESS_ADD - To create address..
3. BUPA_ROLE_ADD_2 - To create role.
4. BUPR_RELATIONSHIP_CREATE - To create relationship.
5. BUPA_BANKDETAIL_ADD - To create acounts.
6. BUPA_STATUS_ADD - To create status.
BP is creating fine...along with I am getting the Error like "Express Document update was terminated received from author ......" . Error descriptin looks like below.
Error Info... CD 328: DUPREC:POS&BUPA_ADR&DP00243572.
I have verified in SM13 T code...It is showing in BUPA_ADR_WRITE_DOCUMENT.
Please suggest me how we can resolve this issue...
Thanks in advance..
Rama

Hi Rama Krishna,
This can also happen when your number ranges are incorrectly defined.
Try checking number range assignment for BP and check in table if number already exist.
We faced similar problem when migrated data from prod server and someone change the number ranges for PO.
Regards,
Mohaiyuddin

Express document "Update was terminated" on saving vendor payment F-48

TCODE F-48.
When we are going to pay full payment to party it works fine
Problem:
When we do partiall payment for example
100 kg material Price $100
first time: we purchase 50kg of $50 and create GRN
After this when we decide to pay the remaing payment of the material then system give the error .
Express document "Update was terminated" . This error appears when we select all the Taxes line simultaneously.
System not show this error when select one tax line and post the document but this is not acceptable because multiple invoice will create for lone documnet.
Looking forward to your replies.

Hi Atif,
Thanks for your quick reply. following are the error details
FUNCTION MODULE: POST_DOCUMENT
STATUS : UPDATE WAS TERMINATED
REPORT : LF005S01
ROW      : 293
ERROR DETAILS :CLASS F1                            NUMBER:109
F1 109: Line item 005
WHEN I CLICK ABAP EDITOR IT TAKES ME LAST LINE OF THE FOLLWONG CODE
FORM BSEG_INSERT.
INSERT BSEG.
IF SY-SUBRC NE 0.
    MESSAGE A109 WITH BSEG-BUZEI BSEG-BUKRS BSEG-BELNR BSEG-GJAHR.
ENDIF.
ENDFORM.       <----
CURSOR BLINKING ON THIS LINE

Express document "Update was terminated" recev from auth While BAPI change

Hi.
   Iam trring to change sales order which is exist in the system provided to insert a new item
for a existing sales oder and pass values to header and update flag as 'U'
and item details and flags for corresponding items.once it throws an error as
"Express document "Update was terminated" recev from auth "
while iam executing bapi_salesorder_change once control goes to the
Bapi_transaction_commit it throws Error .
may i know what is problem and how pass values to BAPI_SALESORDER_CHANGE
Why that kind of errors occur oftenly.
Thanks & Regards
sivakumar kasa

Thanks Mr.JP
Error analysis:
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
when i comment partner details it works but
Iam not getting quantity and partner details   so how to pass Partner Details   and item quantity
to updated existing line item number.
Thanks & Regards
sivakumar kasa

MRKO Error : Express document "update was terminated" received from author

Hi Gurus,
When settling Consignment through MRKO we are getting error 'Express document "update was terminated" received from author xxxx' in ECD system.
At workplace inbox, the error shows "Error Info... XS 007: Address invalid".
Please note that I am not getting any short dump at ST22 for the same error.
My queries are:
1. How can I create a short dump for this error....this will help in analyzing the issue.
2. What are the probable reasons for this error can be.
Thanks in advance for helping.
Regards,
MC

Hi,
I have tried SM13 and getting ERROR XS007(Address Invalid).
Diagnosis says:
The address specified is invalid or initial (address value, address type INT).
Procedure:
Enter a correct address that is suitable for address type INT.
The formats are:
1. INT (Internet Mail Address): <name>@<domain> or comment<name>@<domain> or <name>@<domain>(comment)
2. FAX(fax addresses): <country><number>
ETC
Now as already told, I have properly maintained mail-id in "Email" field & "StandardComm.Mtd" field as E-Mail of the Vendor Master.
The mail ID is my official ID and working.
Please advice further.
Regards,
MC.

SmartForm error: Express document "update was terminated" received from aut

Hi friends
we requirement to send PO smartform through Print out as well as through mail.
after creating PO i am getting popup box saying that :
" Express document "update was terminated" received from author "XXXX".
Please help me.
my code as follows:
    IF sy-subrc = 0.
      CLEAR g_outop.
      SELECT SINGLE ldest dimme FROM nach INTO (g_outop-tddest,
     g_outop-tdimmed) WHERE knumh EQ knumh.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'YNZ_PO'
        IMPORTING
          fm_name            = sf_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      w_ctrlop-getotf = 'X'.
      w_ctrlop-no_dialog = 'X'.
      w_compop-tdnoprev = 'X'.
      CALL FUNCTION sf_name
        EXPORTING
          output_options     = g_outop
          user_settings      = 'X'
          wa_ynz_po_head     = wa_ynz_po_head
          control_parameters = w_ctrlop
       IMPORTING
         job_output_info    = w_return
        TABLES
          t_ynz_po_item      = t_ynz_po_item
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
for mail
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'YNZ_PO'
        IMPORTING
          fm_name            = sf_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
       CLEAR g_outop.                   " Commented by sharma
       g_outop-tddest = nast-ldest.
       g_outop-tdimmed = nast-dimme.
      w_ctrlop-getotf = 'X'.
      w_ctrlop-no_dialog = 'X'.
      w_compop-tdnoprev = 'X'.
      CALL FUNCTION sf_name
        EXPORTING
          output_options     = w_compop
          user_settings      = 'X'
          wa_ynz_po_head     = wa_ynz_po_head
          control_parameters = w_ctrlop
        IMPORTING
          job_output_info    = w_return
        TABLES
          t_ynz_po_item      = t_ynz_po_item
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = v_len_in
    TABLES
      otf                   = i_otf
      lines                 = i_tline
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      OTHERS                = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
    TRANSLATE i_tline USING ' ~'.
    CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~ '.
DO.
    i_record = w_buffer.
Appending 255 characters as a record
    APPEND i_record.
    SHIFT w_buffer LEFT BY 255 PLACES.
    IF w_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
REFRESH: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR w_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'Narasimha'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = w_doc_chng
      put_in_outbox              = 'X'
       commit_work                = 'X'
    TABLES
      packing_list               = i_objpack
      object_header              = w_objhead
      contents_bin               = i_objbin
   contents_hex               = i_objbin
      contents_txt               = i_objtxt
      receivers                  = i_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc <> 0.
    WRITE:/ 'Error When Sending the File', sy-subrc.
ELSE.
    WRITE:/ 'Mail sent'.
ENDIF.

Hi ashok
thanks for your reply.
i got the error at commit in the below Func module.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_bin = i_objbin.
if i remove commit = 'X'. no error but mail is not sending.
please advice.

FMBBC Express document " Update was terminated error"

Hi ,
while saving data FMBBC i am getting saved message , after that if i come out of the Tcode i am getting message as
Express document " update was terminated".I was debugging the standard code found that the error comes from SXOP table entry, This table is get filled from FM SO_EXPRESS_FLAG_SET. But this FM is called from background I think. There is no job also created.After displaying the message automatically the SXOP table entry is get deleted. I want to debug this FM or wht is the reason for displaying message.
Regards,
siva kumar

Following steps may help you.
1. GO to SM13 transaction.
2. Check your update request.
3. You can see exact point in the standard program where you are getting this message

Error : Express Document "update was terminated" by XYZ.

Hi,
When I am trying to process one output type that I have created, I am getting an error
Express Document "update was terminated" by XYZ.
Here XYZ represents my userid .
I have linked the output type to one printprogram. If I execute the print program standalone,
it is working fine. But if I try to process the output , I am getting the above error.
Please suggest the needful.
Regards
Rudra

Hi..
thnx for ur reply....I got the reason for error

Error : "Express Document Update was terminated"

Hi All,
           When creating a PO & after saving, I get a message PO number successfully created. But when I press "Back" button I immediately get a SAP mail "Express Document Update was Terminated".
In SM13 - the following error is shown:-
FM:- RV_MESSAGE_UPDATE Error:- TD 427: Element PO_TERMS_AND_CONDITIONS.
I had read all the previous threads relating to this issue.
Based on the above threads I checked the number range & it seems to be correct. So, I'd like to know what causes this error and also how to solve it.
Any inputs related to this would be of great help.
Thanks
Ramky.G

Hi Deivakaniraja,
                     Thanks for the response.
Option 1 - the flag is already unchecked only.
Option 2 - What should be checked in Terms & Conditions?
Hi Volkan,
                  Thanks for the response.
Actually am an ABAPer and am posting this message on behalf of my Functional.
After double clicking the error line in SM13 only I'm getting this one below:-
FM:- RV_MESSAGE_UPDATE Error:- TD 427: Element PO_TERMS_AND_CONDITIONS.
Thanks & am currently debugging the error in program and also kindly let me know if there's any other solution that could be possible.
Regards
Ramky.G

Express Document "Update was terminated" in FM: BUPA_ADDRESS_CHANGE

Hi all,
As per our requirement we needed to add different types of phone nos to an Business Partners Address. We are using the Function Module BUPA_ADDRESS_CHANGE to insert the Telephone nos by passing values to the internal table for ADR2 table in the FM. The function module updates the phone nos successfully twice. The Function module fails the third and subsequent times within the same session. The code used for the same is as below:
CALL FUNCTION 'BUPA_ADDRESS_CHANGE'
   EXPORTING
     iv_partner          = l_bpnumber          "BP no.
     iv_addrnumber   = l_addrnumber       "BPs address no
     iv_addrguid        = l_addrguid           " Address guid
     is_address        = t_addrdetails        "Address details
TABLES
     it_adtel             = t_teldetails           "Telehphone nos to be inserted with the sequence nos from 001(Home telephone no), 002(Work Phone No.) & 003(Mobile no)
     it_adfax            = t_faxdetails          "One Fax No and its extension with the sequence no set to 001
     it_adsmtp         = t_emaildetails       "Email Details with sequence no set to 001
     it_comrem        = t_telremarks         "Adding a remark to a particular phone no as WORK PHONE No.
     it_adtel_x         = t_teldetailsx         "Setting the updateflag to I for insertion of telephone nos.
     it_adfax_x        = t_faxdetailsx        "Setting the updateflag to I for insertion of fax nos.
     it_adsmt_x       = t_emaildetailsx    "Setting the updateflag to I for insertion of email.
     it_comre_x       = t_telremarksx      "Setting the updateflag to I for insertion of remarks nos.
     et_return          = t_returntab.          "Returns tab for error message
The FM Inserts the Telephone nos successfully twice but fails the third time within the same cic0 session, with the error message as below:
"Express Document "Update was terminated" received from author Kumaran Vurunathan".
Displaying the Document we get the following detail:
Update was terminated
System ID....   DD0
Client.......   040
Transaction..   CIC0
Update key...   42A303E8F2B23E97E1000000947F220A
Generated....   13.06.2005, 04:43:28
Completed....   13.06.2005, 04:43:28
Error info...   CD 328: DUPREC:POS&BUPA_ADR&0000105277
Again, if everytime new Business Partner is used to add telephone nos within the same cic0 session, the program works fine.
The problem occurs only on the same BP being used for the third time within the same session. We are thinking that this might be a Locking problem and thats why the Update is getting terminated.
If anyone had encountered the same issue while using this FM, please advise the reason for the same and how this could be rectified.
Thanks & Regards,
Babu Changalvala,
AOL: babuchangalva.

Hi,
To be clear, my understanding is that you are updating the same partner multiple times with this function.
Try 'commit work' after each call of the FM, if that is not an issue for your current logic.
Another option you can try is calling it with destination option. This is just a guess. Try it like 'Call .... destination NONE importing.....'
cheers,

Error Msg: Express Document 'Update was Terminated' in VF02 t-code

Similar Messages

Maybe you are looking for