Error Msg Help Can't Save PSD Files

This is the error msg its giving me,
Could not save file.psd because you do not have the necessary access privileges.
I own PS4 and every plugin in the system. Can't anyone help me out?
Mac OS 10.6 PS4 with latest updates and all I was doing was working a picture as normal and tried to save and quit and it wouldn't let me bummmer lost everything I did!!!!
Mike K

System Maintenance (repairing permissions ((with Disc Utility in the Utilities-Folder or the free Onyx http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html)), purging PRAM, running cron-scripts, trashing Caches, etc.) might help.
Please note that I wrote »might«.

Similar Messages

Can't save psd file in CS5 op afp nas

Hello,
When I want to save a psd-file with Photoshop 12.0.2 CS5 on a synology NAS (DSM 3.1-1605) with afp-protecol, the file saves en disappears. It only happened with psd files. Tiff (also in layers), jpg or psb files saves perfectly. Before installing CS4 we had no problem with saving Photoshop psd files in CS4, but we now have the same problems to save psd files in CS4.
Is there a solution?
Thanks!
Percy

Thanks for your response. It's strange that we can store all types of files formats. The only thing that fails is a psd file. Photoshop CS5 also does not mention that it failed. No Error. If you look at the place where your file is saved, you see the same psd appear and then disappear again.
It remains strange that we had not psd saving problems last week. After installing learning CS5 we got these problems with just psd-files.
During a Save command throws Adobe Photoshop CS5 the original file from the server, then a new empty file is written in the same place and it is new Photoshop file is written, so updated. This seems to happen in a single action.
This is what I've found about the saving psd problem:
It seems that Mac OS X's use of "Stream Files" a major role in this issue, these are also called Named Streams mentioned. Mac OS X SMB gebuikt Stream Files on shared volumes. During a save operation (save) indicates the server, a NAS or SAN wrong message back to the computer that the Photoshop file is saved causing an adverse reaction occurs, and Photoshop "thinks"that it failed to save the file. Depending on the action response from the server, NAS or SAN in the client error messages may vary.
Various Stream Files used during a preservation action, including AFP_Resource. Thus, various files are kept:
• Photoshopfile.psd
• Photoshopfile.psd:AFP_resource
• ._Photoshopfile.psd
The back reaction is a response of "Photoshopfile.psd: AFP_resource" and not "Photoshopfile.psd. The server, SAN or NAS not see the Stream Files and give a response back on the newly saved file.
But I do not look where the problem lies. I would like to find a good solution. Thanks!

Can't save PSD file, over 2GB... HELP

I can't Save my PSD file because an error message appears saying can't save file, exceeds 2GB.
If anyone can help me it will be much appreciated!
Thanks
tomhammond96

Hello, select Large document format (PSB) or TIFF (but DO REMEMBER TO SAVE WITH LAYERS!

Photoshop CS3 can't save .PSD files

I have Windows XP, Adobe Flash 10.2 ..
I can save all file types two weeks ago, and then one day I just can't. I didn't install/delete anything on my computer before that, it just happened all of a sudden. Scanned for viruses/malware, none found.
PROBLEMS:
1) When I save for web images, I get: "Some of the specified files already exists in the target location. The files marked below will be replaced:", though it IS a new & different file/filename. So I click "replace" and I get this: "Adobe Save for Web Error: Could not write the file. The file was not found". Then I click OK, and Cancel. I checked and nothing was saved except TMP54ee.tmp which is 0bytes.
2) When I save as... .psd, I get: "Could not save as C:\Name\filename.psd because the filename was not valid". I checked, just some gibberish that is TMP54ee.tmp AND ~ps8455.tmp (both 0bytes) are saved.
So I looked online for answers. Trashed settings, uninstalled/reinstalled PS CS3. Nothing worked, so I looked for more. Finally got one solution that worked: Edit > Preferences > File Handling > Uncheck Enable Version Cue. It kinda solved just Problem 1, for web images: KINDA because I get the same error messages on problem 1, but when I check the folder, PNG file IS saved (though filename.png.tmp and TMP34ee.tmp are still saved along that).
*** When I close PS CS3 and open it, sometimes Enable Version Cue is ~magically~ checked again and I have to uncheck it, sometimes it's good. So I can live with that as long as my PNG & JPGs can be saved.
PROBLEM #2 is still unsolved, & I'm still desperate for answers. Can anyone help me? Like I said, I've tried trashing the settings, uninstall/reinstall, updated Flash, nothing worked. And I can save PSDs until two weeks ago.
Help me please...

That sounds like something outside of Photoshop is interfereing with file saving.
None of what you describe should be possible with a clean copy of Photoshop.
But bad anti-virus, disk compression utilities, etc. could cause behaviors like that.

"Can't Save the File. Can't Print the File" error in Illustrato CS3

I get the error "CAN'T SAVE THE FILE. CAN'T PRINT THE FILE". In Illustrator CS3
According to adobe this is an issue of having more that 28 spot colors, so I went to the swatch palette and pulled the fly-out menu out and told it to remove any unused swatches which took me down to 6 spot colors, but I still get the error when trying to save it to EPS format, which is the format I have to have for the ripping program for the vinyl printer in my sign shop. Saving it in AI format causes no issues.
Is there still something I am missing?
Thanks
Roger

I appreciate your comment, I see what your saying.
However...my issue is...I am making a vehicle wrap on a full size van for a radio station and it consist of pictures of a clouds for the background with two pictures of music artist that are associated with the kind of music this station plays, then there is a big round logo of the radio station that involves three spot colors (Purple, white and one of which is technically the black "K" ribbon) along with the web address of the station but it is of the same colors of the radio station logo...then there is the corporate logo that utilizes another spot color (blue)so as you can see I need the spot colors that I'm using.
So just to make sure I'm clear...I can only have 28 different individual colors, even though I have photos involved in the rendering? How can I make that work because photos obviously have more than 28 colors in them. It doesn't make sense because you can do a live trace on something in literally hundreds of colors.
Would it help if I flattened the photo work from photoshop before I move it to Illustrator? The reason I ask is because when I go to save and choose EPS the next save dialogue that comes up...down at the bottom there is two exclamations that one says something about embedding fonts, which I'm not concerned about and the other is something about there is some artwork that needs flattening.
Please bear with me here cause I am definitely a newbie!! My boss threw to the wolves on this adventure and I am learning by reading and trial and error.
Thanks
Roger

Can't save EPS File due to Error

I am currently using Adobe Illustrator CS3 and I am getting an error when I go to save a file I'm working on for a vinyl lettering job.
ERROR:
"Can't save the illustration. The requested transformation would make some objects fall completely off the drawing area."
Any help would be greatly appreciated, as I need to be able to save this file so I can complete the job.
Thanks,
Wayne Chinn.
1 Shot Services
937-447-3300

Try going to the View menu and from the Guides tab do a Clear Guides, then try.

Publishin Error...Can't create the file "shapeimage_16_link_0.png." Can anyone help?

Publishin Error...Can’t create the file “shapeimage_16_link_0.png.” Can anyone help?
Here is the original message...
Publish Error
"Can’t create the file “shapeimage_16_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."

Try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

When I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

when I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

Try using /Applications/Utilities/Disk Utility to repair file permissions.
Bob

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problem

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

Im getting error msg (1) can you help

Hi my bro asked me if i can fix his ipod touch 1st gen its not fuly restoring im getting error msg (1) can you help

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

QuickView, Preview.. etc. Can't Display PSD files

I've been having this problem for some time now - as far back as can remember with OS X.
When I try to view a psd file, (prior to Lep) in Preview or Xee, all I get is the transparent Alpha Channel - ie usually a solid blank neutral gray or checker board white and gray. And as of Leopard (and Snow Leo), this situation now includes Quickview. I get no actual image, or sometimes part of an image displayed, but never the full image that is displayed in PS or PSE.
The ONLY exceptions to this problem I have found is an ancient app called ACDSee v1.6.9 (2001) and Quicktime Player. Both display psd files perfectly.
The preferences to save Image Previews: Always Save, Icon, Full Size, Mac Thumbnail, Windows Thumbnail.
Am I saving psd files wrong somehow so that the default system apps can not display psd files properly?
BTW - this problem is completely consistent on EVERY system I have tried it on regardless of the OS X version (Tiger, Leo, Snow Leo) and Photoshop version (PSE 2, 4, 5, 6; PS 7, CS1, CS2).
Any help or suggestions would be greatly appreciated. This is a very irritating problem..
TIA

This isn't an issue or something you are doing incorrectly, PSD is an Adobe format that is not widely supported. You need to open it within your Adobe application, such as Photoshop.

Can't save any file with any name-InDesign CC

can't save any file with any name-file DBTmp4376-863643269 is damaged (error code:0)
InDesign CC, OS version 10.9.1
I explored solutions to failure in background task alert which did not work. Been using adobe products since they came on the scene. Nothing like this. Please help.

I'm using version 9.2.
Yes, it started with a new file. Support gave me the solution to save it to my desktop which worked. When I put it back in the original folder and opened/save it would not save to that folder. Created a new folder and was able to open & save to the new folder. That seems to be a workable solution. How a folder can become corrupt is a bit scarey.
In experimenting with solutions I received another error "failure in background task alert" and discovered CS5 problems with background task.
However the solutions for CS5 did not work in my incidence.
I sure would like to prevent this from happening again. If you have any insights please share them. Otherwise I will just accept the experience as another computer workaround and be thankful that I have it.
Thanks for responding.

Load/Save psd file

Hi, what is the best way to figure out how to load and save .psd files with layers in Windows? Is there C++ sample code available anywhere? I need to load the layers that contain images into memorybuffers, including transparency, and also be able to supply memorybuffers and save them as a layered psd file. I would appreciate any help.

Btw, this will all happen outside of Photoshop. I just want to use the psd format so that users of my program can have the convenience of opening the image files in Photoshop as well.

My home page is google and it works but when I open a new tab it displays an error message :Firefox can't find the file at chrome://quick_start/content/index.ht

I've made sure a dozen times that my home page is set correctly, and when I hit the home button next to the search bar it works and takes me right to google BUT whenever i open a new tab i get the error that my page cannot load and the web url that it keeps trying to remember is in the error message:
Firefox can't find the file at chrome://quick_start/content/index.html.
of course the last dot is not the url anymore but the end of the sentence for the error message, but i don't ever use chrome ever on my laptop only my cell so what is going on????? help fix god please!!!!!!

Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Open/edit/save psd file in my own developed application

Hi all,
I would like to confirm about:
Do I violate Adboe Macromedia license if I develop a independent desktop application allowing open/edit/save psd file right in my own developed application? (support psd file version is up to CS4).
thanks and regards

No we do not have an open source code for reading .folio files. You can read .folio file in Adobe Content Viewer and in your customer viewer app.

Error Msg Help Can't Save PSD Files

Similar Messages

Maybe you are looking for