Error msg in MRP list

Hi SAP Guru's,
I am getting red light in MRP list (MD06) for my materials mentioning " For material 'X' 'A,0 day's supply is less than limiting value of 0,1-"
what is wrong, what settings i need.
Thanks & Regards,
Karad D D

IT<S INDICATE SHORTAGE OF MATERIAL SUPPLY AS PER YOUR PRODUCTION REQUIRMENT.

Similar Messages

Resolve error msg 26 In the Mrp list

Dear Gm,
How to resolve the below Error in the MRP list
26 Excess in Individual segment
Regards
Arun kumar K

hi
always post the error message number to provide solution for the errors in quick manner

MRP list issue

Hello,
I am having issues when I run MD05 MRP list for a material. It gives me the below error.
"No MRP list exists"
This is a material just extended to a new plant with no stock. Is this issue because there is no stock for it and/or because its a newly extended material?
Same material in a different plant does give me the MRP list view when I run MD05.
let me know how it works.
Thanks
SAP Fans...

Have you had an MRP run after the creation of this material?
If not, then it is obvious that an old MRP run does not know anything about a material created after this event.

MRP List issue(MD05)

Hello,
I am having issues when I run MD05 MRP list for a material. It gives me the below error.
"No MRP list exists"
This is a material just extended to a new plant with no stock. Is this issue because there is no stock for it and/or because its a newly extended material?
Same material in a different plant does give me the MRP list view when I run MD05.
let me know how it works.
Thanks
SAP Fans...

Dhaval and All,
Thanks for the Response. I want to confirm one thing.
"MD05 is for displaying MRP Result.Once you run MRP for that material then only you will find the result in it unless you will find that " NO MRP list exists" message."
The above statement you made (no MRP list exists) is true only in the case of a newly created/extended material for which MRP was never run.
For material which already exists it would still show data in the MRP list from the last MRP run. Isnt it?
Let me know
Thanks
SAP Fans....

Error msg when changing the MRP type in ME22N

Hi,
When i change MRP type from MRP to Manual in ME22N, it will come out the error msg:Purchase request mandatory for MRP generated Purchase order (Application area: ME Message no. ME901)! My question is how to change this error msg to warning msg?
From SPRO-Material Management-Purchasing-Environment Data-Define Attributes of System Messages ,i can not find the entry regarding this issue.
Any suggestion!
Thanks!

Hi,
Sometimes end user want to add some item without PR under MRP PO.
As before system will only indicate the warning msg that we change to error msg three month ago, but i forgot how to change!
thanks!

Photoshop CS2 (program error msg)... Help please!!

I have installed the full creative suite 2 on my new iMac. everything works fine except photoshop?!!?
Illustrator works great, In-Design works great, But when i try to open a file or create a new page in PS it tells me "Could not create document because of a program error"???? ***?
I had a previous version of CS and it worked fine for one day, then that started happening. I installed the CS2 trial version, and it would still give me the same error msg. I erased everything and installed the new CS2 (photoshop, illustrator , in-design and acrobat). It still gives me the same darn msg.???
Any help would be greatly appreciated!
thanks

See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

I just noticed that I can no longer get the shuffle feature on my iTunes 10.4.0.80 to work. I've turned it off and on, but it still just goes in order of the playlist. I too have been getting an error msg at computer startup.

I'm not sure how long it's been like this, but I just noticed that my songs no longer shuffle when playing from iTunes (running 10.4.0.80). No matter if "shuffle songs" is off or on, they still just play on down the playlist in order. Could this be related to other problems I'm seeing listed that seem associated with the latest update? I also get an error msg when my computer is starting up that I think is associated with this latest update (something about not being able to read a line from "Apple sync helper" (hope I haven't butchered that too much, haven't had a chance to copy the error msg)). Is this something that's likely to be fixed in a later update?

After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

I'm getting an error msg 13019 when I try to sync my Nano iPod 6th generation. Anyone know how to fix. The trouble shooting tips for this error

I keep getting error "13019" when trying to sync my Nano iPod 6th generation. The fixes listed in "Troubleshooting" haven't worked, any solution.

I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.
http://support.apple.com/kb/TS3221
Also would like to know how to find my passcode for Restrictions without restore the whole phone.
Not possible, and since the Restrictions Passcode is included with your iPhone's backup, you must restore the iPhone as a new iPhone or not from the backup.

When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing

When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing, no joy, uninstalling and re installing, no joy. Any ideas?
<Subject Edited by Host>

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Ver. 9.4.2 error msg when I click Attach to email: "No profiles have been created...

My Acrobat Ver. 9.4.2 has the following error msg when I click Attach to email: "No profiles have been created.."
I have created the profile in Windows 7 and it works fine with all of the Microsoft Office programs. I use Thunderbird email.
I've followed the corrective measures listed by Adobe to no avail. Can anyone offer some help?
Thanks.

Hi,
It is possible that even though you are using Thunderbird, Windows might have made outlook your default email client once you installed Microsoft Office. Since there is no email profile set in Outlook, it throws an error "No profiles have been created".
A work around can be to make create an email profile in Outlook and make sure that it is set as default email client by selecting it as default in "Default Programs".
Hope that helps.
PS: Adobe does not officially support Thunderbird.
Thanks,
Abhilasha

Spry Validation Textarea Widget "error: missing ) after argument list"

Hi all,
I'm trying to apply validation on textarea in one of my forms but it keeps giving me the same error msg in Firefox "missing ) after argument list". Funny thing is that the line witch initiate the textarea object is one on one from the Spry Framework Documentation!
Here is fragment of the form code:
<label id="cContentCont">
     <span class="cFormTag">Comment: <span id="charCounter"></span></span>
     <textarea name="comContent" id="comContent"></textarea>
     <span class="textfieldRequiredMsg"></span>
</label>
Here is the code that initialize this object:
var sprytextarea1    = new Spry.Widget.ValidationTextarea("cContentCont" {maxChars:100, counterType:"chars_remaining", counterId:"charCounter"} ) ;
I have also 2 other text inputs befor that element and they are working just fine befor i initiate that particular textarea!
I can't see an error or missing argument in this line, please if somebody encounter the same problem and have solution I be glade to share his experience!
Thanks !

Your code is missing a comma after "chars_remaining" as in
var sprytextarea1 = new Spry.Widget.ValidationTextarea("cContentCont", {maxChars:100, counterType:"chars_remaining", counterId:"charCounter"});
Hope this helps,
Ben

Firefox crashes and when attempting to launch after the crash it won't and throw and error msg that js.3250 can't be found- but same file is in Mozilla directory. I must then download new 3.6.8 and lose all tabs.

# Question
Firefox crashes and when attempting to launch after the crash it won't launch; throwing an error msg that " js.3250 can't be found" - but same file is in Mozilla directory.
I must then download new 3.6.8 and lose all tabs and history.

I have a similar problem. Recently my FF8 has been crashing a lot. It regularly locks up an entire core of my PC and often just shuts down. It has just done it a moment ago and when it started back up it did the whole "this is embarrassing" thing and asked me if I wanted to reload my tabs. I deselected the one that I was trying to view as I suspected that it may have been the cause (unlikely; it was node4.co.uk) but anyway, let's skip it just in case. Click on the button to restore and up pops my homepage only. So all of my other tabs, which I was using for work incidentally, are gone.
This is not the first time this has happened on FF8. It happened a lot recently on FF6 I think it was (so hard to keep track now, Mozilla) and I switched to Chrome as a result, but it turns out that it crashes even more than FF6 did. FF7 was a vast improvement but FF8 is so unstable/unpredictable for me at the moment that I think I'd rather use IE9 than this. It's driving me mental, clearly! I wish I could kill the process manually and have it retry restoring tabs. Hey, there's an idea Mozilla; give us a menu item that allows us to restore the session to how it started to try again or at the very least get a list of the pages we were looking at. They don't show up in Recently Closed Windows and the Restore Previous Session is greyed out too. Gah! Help!

TS3697 error msg items could not be synced

i'm trying to upload my photos from my 4s to my laptop. i was able to upload a few but can't get them all to upload!
itunes acts like its going to work and finishes but then i get an error msg on my iphone. it says itunes sync then lists the entire amt of my photos and says those said items could not be synced. see itunes for more info. but i can't find out any other info even on my itunes! can anyone help me with this before i totally lose it! lol

Hello ChasityE,
It sounds like you are trying to import photos from your iPhone 4S to your computer. The Photos tab in iTunes is for syncing photos to your iPhone from your computer, but I found an article with the steps you can take to import the photos from your iPhone to your computer:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
Thank you for using Apple Support Communities.
Best,
Sheila M.

Trying to download LR5 that i purchased about three month ago on a new computer but I get an error msg. why???

trying to download LR5 that i purchased about three month ago on a new computer but I get an error msg. why??

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When I close an Adobe doc I get a message that it has stoped working and a error msg

When I close an Adobe doc I get a message that it has stoped working and a error msg - The instruction at 0x7734464a referenced memory at 0x00000010. The memory could not be read. This is very annoying. Word 2010 does almost the same thing.
Please help!

I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

Error msg in MRP list

Similar Messages

Maybe you are looking for