Error msg in opening Ps CC(2014)

When I open manualy Ps CC(2014) I get an error msg stationg that dll: QtCorellS4.dll is missing but It continues starting up no problem afterwards.
When I open a file in bridge (raw) Ps CC2014 is opened whitout the stated error msg

Mylenium, there IS no proper system information just a dll missing as stated (see picture)
chirs thanks wil try your suggestion

Similar Messages

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

Get error msg when opening iphoto from Photoshop: "Open iphoto 5 or later..

I get an error msg when trying to open a photo in iPhoto from Photoshop: "Open iPhoto 5 or later to see photos from your iPhoto Library in this list." ... but in info it says I have iPhoto '08.... I am confused.... what is iPhoto 5, and how is it different than iPhoto '08? I have not had this issue before today.... previously it was working fine.
Please email me when answered as it took me a while to find this forum and I'm afraid I won't be able to find it again.
Thanks,
<edited by host>

Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

6 lines of red error msgs when opening an InfoPackage

When I double click an infoPackage to open it, get to a window titled as "Execute Repeat Request"? with the following 6 lines of red msgs in the sequence as below (see in between two dashed lines):
Delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV is incorrect in the monitor
A repeat needs to be requested
Data target 0BBP_CON still includes delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV
If the repeat is now loaded, then there could possibly be
duplicate data in the data targets
Request the repeat?
What could cause the problems and how to resolve them?
Thanks for everyone's input!

hey Paolo,
I checked the short dump, but it seems not helpful. See below in between two dashed lines for the short dump msg:
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     31.10.2005 at 00:02:12
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "DbSlExeModifyDB6( SQLExecute ): [IBM][CLI
Driver][DB2/AIX64] SQL0289N Unable to allocate new pages in table space
"QDW#ODSD". SQLSTATE=57011 row=261"
Internal call code.........: "[RSQL/INSR//BIC/B0000432000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP3ZBWN7YYJYC54GT20I6UDDJ2Z " or "GP3ZBWN7YYJYC54GT20I6UDDJ2Z "
"INSERT_ODS"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
Details regarding the conditions under which the error occurred
or which actions and input led to the error.
What could be the reason?
Thanks

Value Set error msg when opening sales order Form

Hi
I created a value Set(where the values are populated at run time based on a view) which is attached to DFF (column eg Attribute13),The Value set would get value populated only if any sales order lines are cancelled, as the value of Attribute13 on cancelled line would be inserted to new Order Line.
The Problem is when ever the Sales order Form is opened it throws the error message
"Value XX For the FlexField Segment dosent not exists in the valueset (Valueset name)" as the oe_order_lines_all.attribute13 has value and the value set has null, it matches it and throw the above error.
Could you guys give any suggestion how to avoid it, or is there any workarould , Thanks
Thanks

This tells me that the same attribute is used for something else and there is a value in that the column that is not your table which you are validating against. Or the value you are setting is not in that table.
About the context: If the same attribute is used under a different context AND if that context gets set when you open the sales order AND if the validation type is different under that context for attribute13, you will get this error.
Thanks
Nagamohan

Using windows 8 install adobe flash player. Immeadiateley on start up I get error msg : 0x71090000

using windows 8 install adobe flash player(new notebook). Immeadiateley on start up I get error msg : the instructions at 0x71090000 referenced memory at 0x71090000. the memory could not be written. click to terminate program.
No matter what I do, the error msg keeps opening a dialog box with the above msg. The only way I found to get rid of the error msg is to uninstall the flash player program. I have tried several times to install and it doesn't work.
I found that I am unable to listen to internet radio, web pages pop up flash error msg.
Any help.
[email protected]
Thanks

For Mozilla, please install the following: http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe

Since yosemite install, I cannot openAI cs5.5 -error msg

since yosemite install, I cannot open ai cs5.5 -error msg is "an unknown error has occurred (-50). Adobe illustrator will now quit, I have spent ages trying to find fix and since I downloaded the app, am not sure what to do, can I re-install online from Adobe site? I cannot figure out why all other apps are working, except AI
thanks

Try to install java from below link and try once
Java for OS X 2014-001

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem.

When i try to open docs in mail box i get an error msg : there is a problem with adobe acrobat/read

when i try to open docs in mail box i get an error msg : "there is a problem with adobe acrobat/reader. If it is running please exit and try again (1014:1014)"

I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again

Downloaded Adobe 9 -- Using Word 2007 to open PDF doc (Error Msg)

I just updated to Adobe 9 and am getting this signature error message when trying to open a pdf doc from MicroSoft Word 2007: appname: acrord32.exe appver: 9.3.0.148 ModName: acrord32dll ModVer: 9.3.0.148 Offset: 001937fa
Am not able to get beyond the error msg.
Help anyone?

I have MicroSoft Word Office 2007.
I recently upgraded from Adobe 8.1 to 9.3. Now, I can no longer open pdf docs.
I am getting an error that says: "Adobe Reader 9.3 (or 8.1) has encountered a problem and needs to close."
I have uninstalled 9.3 and reinstalled. I have uninstalled 9.3 and reinstalled 8.1. I have gone back to 9.3.
I have run 2008 Advanced Registry Optimizer.
The error signature when trying to open a pdf file w/ either Adobe Reader (9.3 or 8.1) is this:
AppName acrord exe AppVer: 9.3.0148 ModName: acrord32.dll ModVer: 9.3.0.148 Offset: 0019371a.
How do I get back to opening pdf docs??

When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing

When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing, no joy, uninstalling and re installing, no joy. Any ideas?
<Subject Edited by Host>

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me?

I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.

In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import. It does pretty well on basic things, though.
If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
SG

HP Officejet 5610 all in one "Door Open" error msg

HP Officejet 5610 all in one printer:
"Door Open" error msg when door is closed. Can't print.

Hello DSYW,
Please check your inbox for further instructions.
If issue still persists after you have performed steps mentioned in you inbox, then its a printer hardware failure and printer need to be serviced.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HT1349 when i try to open itunes on my pc i get error msg msvcr80.dll followed by error 7 (win error 126)

when i try to open itunes on my pc i get error msg msvcr80.dll followed by error 7 (windows error 126)

This has been a very popular question the past 24 hours...best solution so far is that of tt2: https://discussions.apple.com/thread/5819124

When I open firefox it works like normal for about 10-15 seconds and then it just closes. It doesn't give me any sort of error msg. How can I fix this?

Firefox is closing without any sort of error msg. I open it and after 10-15 seconds it just closes. I don't know what's going on because it doesn't give me any msg. as to why it closed.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; MSN Optimized;US)

These apperarances of the spinning wheel tend to be related to some io operation that takes too long. Maybe the finder is trying to reach a network server that became unavailable.
I would try clearing caches and do an overall maintenance with an utility like OnyX.
Also, trashing preferences does no harm and is often the first troubleshooting measure when FCP X misbehaves.

Error msg in opening Ps CC(2014)

Similar Messages

Maybe you are looking for