Error msg in texts...

Hi,
i hav uploaded master data attr's successfully thru flatfile .. when i create an infopack for texts its giving me a warning msg as " Assign a language field to IOBJ 0LANG; danger of short dump "
Version is BW7.0
Can anyone experienced the same prob..
or am i missing some thing
thanks,

HI,
Go to your Datasource which you have created for Flat file.
Add one more field LANGU
And in Flat file also make a column for the Field.
Means your flat file looks like this.
<your field>LANGU
XX----
EN
Now preview that field is mapped properly.
Now if you are using Infosource map these LANGU field with 0LANG in transfer rule.
or if you are using Transformation-> map this LANGU filed to 0LANG.
Activate and load data again.
Hope i m clr.
Regards,
San!

Similar Messages

Error Msg during Sales Order Creation V1201

Hi,
I have created a new conditon ZZ01, applied to the pricing procedure, tested it in sandpit and it works. But after transport it toour QA client, the error msg
No text is defined for language EN usage A appl. V cond. type (T586T)
Message no. V1201
Diagnosis
There is no entry for condition type with the specificed characteristics in text table T685T
Anyone know what could cause this error and how to fix it?
I have tried to update the condition description and transport it again, but it doesnt fixed the error.
Thank you so much in advance.
Regards,
Rebella

Hi
you have created new pricing condition ZZ01, but look at the error, its error in TEXT determination not in pricing:
No text is defined for language EN usage A appl. V cond. type (T586T)
Message no. V1201
Diagnosis
There is no entry for condition type with the specificed characteristics in text table T685T
Please check your text determination for your sales order type.

Error msg no FS780 when changeing tax text in FTXP

Hi ,
I am geting following error msg no FS780 when changeing tax text in FTXP

First add the message in OBMSG transaction code.
Application Are: FS
Message: 780
Switch Off
Then come to OBA5 Switch off for batch and online posting.
Regards,
Ravi

Two Mail Error Msgs: Message Can't Be Saved/Drafts & Invalid Text Encoding

My Mail was working fine until just recently. Now when I am replying or composing emails, out of the blue, in the middle of typing my message, I will get this error message first: "This message can't be saved to the Drafts mailbox."
After closing that error box which had nothing to do with my typing, I will then get this second error message: "Invalid Text Encoding....converted to the "Japanese (Shift JIS)" text encoding...."
I then close that message and try to finish typing my message. I've checked to see that my text encoding is set where it belongs, and it is never set to Japanese. Does anybody know what is going on here? Any help will be much appreciated. Thank you, Diane

The following test might be helpful in deciding what to try next: Create a New User Account, and as that New User try to set up one account -- since you have a POP set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test to now check this behavior in another User Account, and of course is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account and its existing setup data.
Ernie

Error Msg KD561 while doing WBS settlement.

Dear All,
We are settle the WBS element to and asset and its giving the following error.
Error Msg. KD 561
settlement from revenue/debit-side downpayment to reciver FXA XXXXX not allowed.
My doubt is if their are any debit side downpayments or revenue items can we settle them to asset directly or do we need to settle them to some object other than downpayment.
Please give me some idea about it.
Thanks & Regards
Krishna Chaitanya

Hi Chaitanya,
The logic behind the message KD561 is defined in note 115423. Please review it.
As mentioned in the long text of the message KD561:
Revenues or customer down payments can only be settled to G/L accounts, profitability segments, sales documents, real estate objects, orders with revenues, or WBS elements.
reagrds Bernhard

Error msg while processing a PO

Guys, while processing a PO i enounter an error msg "NO SHORT TEXT MAINTAINED IN LANGUAGE DE"...is this an error with the master ???

Guys, while processing a PO i enounter an error msg "NO SHORT TEXT MAINTAINED IN LANGUAGE DE"...is this an error with the master ???
Do you think it's a right place to ask this question? I don't.
Have a Coffee Break and then think friend
Regards,
Nick Loy

I'm getting the error msg "apple application support was not found. Apple application support is required to run itunes. error 2. How can i fix this?

Hi, I was running itunes software just fine. I got some malware and unintalled everything that was from apple. Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
What can I do to fix this?
Thank you.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

2 items: 1) importing cvs columns do not match t-bird columns 2) error msg when trying to add 2nd email account

Hi and thanks in advance for lending a hand.
Issue #1
Followed instructions at https://www.youtube.com/watch?v=8Df8mRL3TBs to import cvs to t-bird – but
My cvs headings are not name, email m chat name, org, additional email etc etc
Why are my columns names not showing up?
+++++++++++++++++++++++++++++++++++
Issues #2
Adding second email address in thunder bird
email address #1 works fine - but trying to add 2nd one – having error msgs poop up.
1st error msg is:
[Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIMsgIncomingServer.verifyLogon]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://messenger/content/accountcreation/verifyConfig.js :: verifyLogon :: line 98" data: no]
Pressing “done" again yields different error reply: Incoming server already exists.
[end of error msgs]
Have tried box1121.bluehost.com as well as mail.bikempowered.com for server hostnames - various ports and SSL’s
The Tech at blue host claimed there this was a bug known to thunderbird – and that a solution is known to be needed.
Seeking solutions - also I’m 90% Luddite - so please if at all possible, but things in “for Dummies” mode
With gratitude and hope,
Brian

About .csv check your .csv-file as a text file.
Is the first line your column-names separated with a "," ?
It should be. When you import, mark that 1st line has column-names
Then move Tbird's names around until they correspond with yours. Your names will not be imported.

Error while starting workflow from warning msg or error msg?

Hello experts,
I m tryin to start and workflow from error msg of ME21...whn we juss click enter without entering any value, it gives error as -" enter Purch org ". whose msg class - ME and msg num - 083.
thn from t-code SWUY,i creating and linked workflow for the msg.
Now while testing,when m goin to t-code ME21, and goin to the long text of tht error msg.....the button to start workflow is not getttin enabled. tht is still disable.
PLease tell r thr any other back ground settings to be done for this.
Regards
Nitin

Hi,
Your workflow landed up in Error and you want to Restart it right.
Go to SWPR and check that workflow is there.
If found, select it and Restart it.
Regards,
Surjith

I have an error msg: Warning!! iOS Crash Report

I just got this error msg.
Warning!! iOS Crash Report. Due to a third party application in your phone, iOS is crashed. Contact Support for an Immediate Fix.
There is a 1-800 number noted. Is this legit or this this a virus? We have tried shutting down the ipad and re-setting but nothing seems to work. This error message keeps popping up. Anyone got any ideas?

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

HP 3015 all in one error msg

Error msg NO PRINT CARTRIDGE even though there is a cartridge,
I read all other help blogs.
There is NO paper at all jammed. No small plastic parts loose
Cartridge is in place and has been removed and reinserted many times.
paper has been removed and reinserted many times.
power turned off and on many times.
I want to reset. This happened after power outage. Yes, it was on a surge protector.
Is there any way to reset the whole thing. The cartridge is only a month old and is very full.

Hi @sbu22plankowner,
Welcome to the HP Forums!
I am sorry to hear that you are getting the incompatible ink cartridges error with your HP 1051, but I am happy to help!
Is your printer able to make copies? Copy Documents with Text and Graphics.
Are you using a Mac or Windows Operating System? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, please take sometime and go through this guide, 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or Prin....
Hope this helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Getting error in loading Text data to Planning

Hi,
I am planning to load text data to Planning. Following John's blog to do this,
More to life than this...: ODI - Getting text data into planning
I have Completed Data Load Administration task also in the Planning app.
I have mapped Data file and SQL table to the Target. When i map Text_Id with FY13(In blog it is MP3), that Join is showing x(wrong symbol) on that.
Is it means, mapping is not correct??
After that if i click on Flow tab, it is not showing any diagrams. I am getting this msg instead of diagrams,
odi-20350 your diagram contains one or more FATAL/CRITICAL errors preventing display of the Flow Editor
(I guess, because it contains errors in the mapping)
where can i find the error logs or error msg's regarding the issue in the ODI??
Any comments would be appreciated...!
Thanks,
mady

Hi John,
Thanks for the response.
I have followed exact steps from your blog to load Textdata to Hyperion 11.1.1.3. But after executing the inferface i am getting the below error.
TP1 is Period dimension member.(Driver Dimension member name). In the error msg, it is showing as Object not found. But i have that member is there in Hyperion Planning application.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 20, in <module>
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.JDBCStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.JDBCStatement.executeQuery(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: user lacks privilege or object not found: TP1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
Thanks,
mady

Error Msg enter storage location in stock transfer

Hi SAP Gurus,
Can anybody tell me when I am trying to do the PGI for stock Transfer order ,It giving error Msg enter storage location ,bit I have already entered the storage location.
Msg type App area Msg No item msg text long text Material desc Qty
E M7 018 10 Enter storage loc 2176 food 1
Thanks ,
Siddhartha

Kindly check the Settings for that Delivery Item Category - Activate the check box for Storage Location Required & determine St Location. After this assignment , system should determine automatically the Storage Location.
Now in OVL3 ,assign the Organization Units to determine the Storage Location.
To check these settings, either delete this Delivery & create the fresh one & check.
Best Regards,
Ankur

HT1199 My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?

Plz help
My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?

Hi LIsa,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Or..
Tough without the Install Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.

Send back an error msg to previous page

hi all,
can anyone tel me hw shud i send back an
error to previous page and write tht error msg
in the same cell of table where text field was
null or empty.
hw can i sene addtional info with sendRedirect()
using
sendRedirect("..url...?add=var1");
as var1 converts to string "var1" using above
tel me if sm other gud method.
thnx

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly

Error msg in texts...

Similar Messages

Maybe you are looking for