Error msg LB-045 during material to material transfer

Dear all,
During mat-to-mat transfer i am getting an error msg LB 045- characteristics value for the batch are incomplete.
Though I have maintained all the required characteristics the material is not getting transferred.
What may be the reason for the same .
Has somebody changed the setting for the same.
Pls sugggest
Thanks to all
manisha

Hi,
Do one thing go to that classification tab and find out all the Characteristic assign to it.
- Must be one or more characteristic are contains active check box for Entry required.
Go to CT04 and find out.
- Another thing is in Std. SAP That MSG is set as Information only.But if you don't want to set it as Error then go to t.code OCHS and change category of massage LB045 to either w or keep it blank.
Regards,
Dhaval

Similar Messages

Error msg shown while cancelling the GR - Material Document

Hi All,
While trying to cancell the GR for an Asset / Material the following error msg shown:
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000000107102-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
Can any one help what is the reason and how to find out the error.
Regards
SS

Hello,
Please refer SAP notes
160699
48886
Please also search SAP market place with message number., if these notes not suitable for you.
Regards,
Ravi

Error msg: ZFI999:Maintain price for the material 254600254 in plant 1000

Hi gurus
18.02.2009 i created one STO PO. but material price in the accounting view the price was "Zero" in plant 1000. In plant 2000 the price has already maintained.
But today i updated the material price like Rs 200/- through MR21 for plant 1000.
After that while i transport the material through MB1B (351 mvt type) plant 1000 to 2000, i got the following error msg.
"ZFI999:Maintain price for the material 254600254 in plant 1000".
Regards
Amsi

Hi Amsi
the message no is not standard i think there has been a new message created. please check with your ABAPer about the message.
just want some clarification. you are doing STO from plant 1000 to 2000. the price should be picked for that material maintained in plant 2000.
in case of queries please revert back
Adwait Bachuwar

Get error Msg. VL 150 Only & & Material & available

Hi
I have one sales order with 100 kg qty, and my confirm qty is 50 kg by today when i am doing delivery of 51 KG system gives error MSG as above. pls help me.

Hi
Sales order qty is 100 Kg
Confirmed qty is 50 units (i mean confirmed qty in schedule lines)
Delivery created qty is 51 kg
Then system throws a error message
This means in your delivery item category in t code 0VLP that us ZERO VLP the over delivery is marked with B reject with error message
Even if you try to change it warning that is Aor no message that is blank
You may face problem while doing PGI as the system is giving the confirmed qty of 50 only after some availabilty check and you are trying to deliver a qty what is more than the available qty
So careful about any changes
Regards
raja

MR11 : error CKMLGRIR013 for a po of a material UNBW

Dear.
I try to run MR11 for a purchase order with goods receipt of a material UNBW.
The system send this error message when I try to post clearing.
Error during reading of material ... or material locked
Message no. CKMLGRIR013
Can you help me ?
Thanks.

Hi,
check SAP Note:-
Note 1145489 - MR11: Error handling in background processing
Regards
Kailas Ugale

MARA-GEWEI is not overtaken during creation of material from cdesk

Hi, we work in ENV SAP R3 4.71 and create material in background out from
cdesk.
Therefore we defined in the customizing of CAD Desktop that in case of
creation of material MARA-GEWEI determination type = constant and
determination parameter is "ST" for "piece"
Every other parameter works fine during creation of material ==> as soon as
we fill a weight into the corresponding fields SAP tells us a message
"ENTER the unit of weight for the net weight" ==> if you press "continue action then" SAP ends creation of material an nothing happens....
ANY ideas?
(will enter this message for sure as well into the oss....)

Hi Gerhard,
have u put
EXP_MARA-BRGEW           Gross weight
EXP_MARA-NTGEW            Net weight
from Inv side in config...
Also check in cdesk_cus under create material
<b>Base Unit of Measure               Constant     ST
Net Weight               File Attribute     Physical_Properties_MassValue</b>
hope this helps

Posting with MM Movement Type 309 material to material: Error in WM

Hello,
i post an MM-Movement type (Bewegungsart) 309 (material to material).
The MM-goods movement works, but then in warehouse mangagement there is a problem:
The creation of the transfer order (Transportauftrag) stops in many cases.
The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
capacity of the bin location is not enough.
The Problem is that I do a posting for example:
001 010101 to 922 Umbuchungzone --> Transfer order Pos 1
922 Umbuchungszone to 001 010101 --> Transfer order Pos 2.
And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
I hope anybody can help me.
Thanks.

Hello Kevin,
I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
Success and thanks beforehand for any credits!
Kind regards,
Bart

Error in LSMW while specifying file for Material Cassification and Info Rec

Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
Amit

Hi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn

Error when creating link to documents from material

Hi all,
while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
why this error message is displayed.?
Regards,
GaneshRaja

Hello Ganesh
Please check material master - view 'Bases data 2'.
There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
Try to do this and check out again.....
If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
Best Regards
Avinash

Error when creating a STO DEL for material

I am trying to find the reason why when my client creates a STODEL itgives them the error message "Not Possible to determine shipping data for material" The Material type is Raw Material (ROH). The gentlemen before me said he implemented note note 335504 in QA1, however this did not correct the problem. In my experience I thought the Sales view needed to be set up in the material master. So I extended those views. I have also added loading and transportation group in the material master. I still get the same error. Is there anyone that could please provide me some advice as to where to go from here? Have I missed something?
I will reward points for helpful answers. Thanks in advance

Hi
Have you extended material to both plants?
regards
Srinivas

Error msg during startup

During startup I get this error msg: Windows cannot find C:\Program Files (X86)Adobe\Reader9.0\Reader\Reader_SL.exe. I was running Adobe10 so I uninstalled that and installed Adobe9 and over that I installed Adobe10. It didn't work, the error msg is still there during startup. Thanks for any help.

Your approach was correct; upgrading from Reader 9 to 10 should have completely uninstalled Reader 9.
Unfortunately it did not; possible fix:
uninstall Reader 10
install Reader 9
uninstall Reader 9
install Reader 10
However, there is still no guarantee that manually uninstalling Reader 9 will remove that startup item.
What I would do: manually remove that item from the startup list. There are quite a number of tools that can help you with that: msconfig, CCleaner, Startup Inspector, Autoruns, ...

ERROR MSG DURING ATTEMPT TO SAVE A QUERY ON LOCAL

Hi Experts,
Kindly help me out
ERROR MSG DURING ATTEMPT TO SAVE A QUERY ON LOCAL
status message : Errors: Authorization change not available for query

Hi Surendra,
Nw while i executing this query in production system
Error i gt: 1. Infoprovider was changed or activated at runtime
2. system error in program CL_RSD_Multiprov and form GET_PART_IOBJNM_CMP_01
Kindly give me some inputs
Thnks
Sinu

Error Msg During PO creation

Hi,
How to bring the error msg if the purchase order value exceed than the valuation price of Purchase requistion
Thanks in Advance
Regards,
Renuga.A

hii
We can do that by using USER EXIT option.
So check with ur ABAPer and give ur functional requirements with which kind of error should come there .
Technical consultant can do that .
Thanks
SAP-MM

Device driver error msg at startup-get white screen w/audio during playback

PE10 has been working fine until today.
Upon startup I get an error message saying my display driver is incompatible.
I checked the driver in Windows 7-it says the driver is up to date and working fine.
When playing back a video clip I'm editing in PE10, I get a white screen in the playback area with the correct audio. When I pause the playback, the video image appears. Play = white playback screen.
I have
-checked the display driver
-rolled my computer back to an earlier restore point
-uninstalled and reinstalled PE10
-turned off my firewall
Any other suggestions to try?

What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
Premiere Elements 10
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
none available
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows 7 AMD dual-core processor
AMD Radeon HD 6310 display driver
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
MVI files from camera -- all worked fine in PE10 until today - same files play fine in other players
If you are getting error message(s), what is the full text of the error message(s)?
What were you doing when the problem occurred?
Starting up PE10
Has this ever worked before?
Yes, always until today.
What other software are you running?
None
Do you have any third-party effects or codecs installed?
No
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
I'm not techie and don't know what this means - I don't have anything mentioned in brackets
Are you using Mercury Playback Engine GPU Acceleration?
no
Does the problem only happen with your final output, with previews, or both?
Error message above happens during startup
PE10 now loads really slowly (5 minutes)
Playback in project gives white screen instead of video. Audio is fine.

Error Msg during Sales Order Creation V1201

Hi,
I have created a new conditon ZZ01, applied to the pricing procedure, tested it in sandpit and it works. But after transport it toour QA client, the error msg
No text is defined for language EN usage A appl. V cond. type (T586T)
Message no. V1201
Diagnosis
There is no entry for condition type with the specificed characteristics in text table T685T
Anyone know what could cause this error and how to fix it?
I have tried to update the condition description and transport it again, but it doesnt fixed the error.
Thank you so much in advance.
Regards,
Rebella

Hi
you have created new pricing condition ZZ01, but look at the error, its error in TEXT determination not in pricing:
No text is defined for language EN usage A appl. V cond. type (T586T)
Message no. V1201
Diagnosis
There is no entry for condition type with the specificed characteristics in text table T685T
Please check your text determination for your sales order type.

Error msg LB-045 during material to material transfer

Similar Messages

Maybe you are looking for