Error msg- ME53N tocde "company was not supplied in Function module inte -

Hi
When user is trying to open ME53N tcode he is getting folowing error message,
"company was not supplied in Function module interface"
Kindly help, how to avoid this error message.
Thank You in advance.
WR,
Nilesh

We observed this error comes when you had previously opened any PO which now has missing data or assignment like ..plant deactivated..plant CC assignment etc.
Work around, Open any Good PO in chnage mode me22n or create any test PO in me21n. And then try to execute me23n.
Regards,
Nilesh Hiwale

Similar Messages

ME52n - Error Message - Company was not supplied in function module.

Hello,
It is giving error Message - "Company was not supplied in function module" in the initial screen of ME52n and ME53n.
Please help.
Thanks,
Piyush

Hi Vadi,
when ever you open me52n or me53n ..system by default opnes/shows your last created/ opned PR.
so if that last created / changed PR is having wrong/faulty data (missing assignment/ plat stolocation deleted etc) ..system will not be able to fetch respective data....thats why you will get above eror message...
Solution : Create any smaple PR in ME51n/ or try to chnage any existing PR.. and then save it.
try this 1 or 2 times.
Hope so this will help.
Regards,
Nilesh

Company was not supplied in Function module interface

Hi all,
When i tries to access the following tcode - me52n,me53n i got following erro message "Company was not supplied in Function module interface" ,
Thanks

Hi Navdeep,
Maintain company code in your user profile with the parameter id BUK.
like in you user profile, on parameter id tab give the parameter id name BUk and value '0001' (the company code against purchase requistion had been created)
Hope it will solve your problem.
Regards
Krish

I'm getting the error msg "apple application support was not found. Apple application support is required to run itunes. error 2. How can i fix this?

Hi, I was running itunes software just fine. I got some malware and unintalled everything that was from apple. Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
What can I do to fix this?
Thank you.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

JDBC adapter Stored Procedure error: parameter was not supplied

I am trying to call a Stored Procedure 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' in our SQL Server database.
XI 3.0 Sp13
Jdbc Url: jdbc:microsoft:sqlserver://161.241.255.91:1433;databaseName=FusionDB;SelectMethod=Cursor
I am getting following error:
beging of error-----
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' (structure 'Statement1'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Procedure 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' expects parameter '@control_no', which was not supplied.
End of error-----
I have defined the field "control_no" in the interface defenition but I am not sure what causing this error, error message is mis-leading.
Please let me know if you have any hints/comments?
thanks,
Laxman molugu

Hi Laxman,
maybe you have checked this already...from the following help link....DECIMAL might be something you might want to try out....
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
<i>action=EXECUTE
Statements with this action result in a stored procedure being executed. The name of the element is interpreted as the name of the stored procedure in the database. If you use the optional <table> element, the value specified here is used as the stored procedure name. This enables you, for example, to define stored procedure names containing non-XML-compatible characters or characters that prevent them from being used in interface definitions in the Integration Builder/PCK. If specified, <table> must be the first element in the block within <dbTableName>.
The elements within the stored procedure are interpreted as parameters. They can optionally have the attribute isInput=1 (input parameter) or isOutput=1 (output parameter) or both (INOUT parameter). If both attributes are missing, the element is interpreted as an input parameter. The parameter names must be identical to those of the stored procedure definition.
The attribute type=<SQL-Datatype> , which describes the valid SQL data type, is mandatory for all parameter types (IN, OUT, INOUT).
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).</i>

Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
Invites to share a calendar to OD accounts on the server seem to work fine.
I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
I've tried creating a new test account and no luck.
I don't know what else to try.
Thanks in advance for any help!

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

Procedure 'abc' expects parameter '@def', which was not supplied

Hi ,
I am doing a ABAP Proxy to PI to JDBC Stored Procedure synchronous scenario but getting an error as :
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'db.abc' (structure 'Statement'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Procedure 'abc' expects parameter '@def', which was not supplied.
I have a element by name def in the data type.
Any ideas why this error is coming up?
Thanks,
Anu

use logsqlstatement in receiver JDBC, it will give you exact sql PI is firing on DB.
using that you can adjust your DT structure to form the right sql.

Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied.

Hello,
when i view replication monitor i get the following error:
Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied. (Source: MSSQLServer, Error number: 201)
also, in what database the stored procedure 'sp_MSupd_dboItems' found
Can someone help with this error please

I know I am very late to the party.. However, I would like to provide a solution to this problem. I have seen this problem lately and I have fixed it.
This problem occurs when you are replicating the data over to the same target database from multiple sources.
Let me explain briefly with an example.
I have a table namely 'vijay.dbo.test_vj' on ServerA and replicating it over to ServerC with the same schema as 'vijay.dbo.test_vj' at the target database.
I have a table namely 'vijay.dbo.test_vj' on ServerB and replicating it over to ServerC with a different schema as 'vijay.srvrB.test_vj' at the target database.
So, here in this case… the target database is same but the target tables are different (i.e., schema is different). The problem here is that the replication stored procedures (sp_MSins*, sp_MSupd* & sp_MSdel*) that were created by default at the target
database are being used for both the replications of 'srvrB' and 'dbo' schema tables.
When you configure this type of replication, you should give custom names to the replication stored procedures (in the article properties) to allow the Replication to create the stored procedures separately for each table at the target database.
You need to reconfigure one of those replications (either the one for ServerA to ServerC or the one for ServerB to ServerC) by giving a separate names to the replication procedures.
This change will fix your problem.
Regards, Vijay Pidikiti

(rsInternalError) Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.

Hi,
Does the (Procedure or function CreateSession expects parameter @SiteZone, which was not supplied.)
error require a complete reconfiguration of reporting services ?
Regards

Hi KeeperHill,
The error message” Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.” means that there is a procedure or function named CreateSession, it expects a parameter(@SiteZone) but not given.
Based on my research, the problem can be caused by the two reasons:
The use of null value for parameter @SiteZone, we should actually use DBNull.Value.
Forgotten to put the following command in your code:
cmd.CommandType = CommandType.StoredProcedure;
For more details, please refer to the similar thread below:
http://stackoverflow.com/questions/368642/procedure-expects-parameter-which-was-not-supplied
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

UI error "The requested lookup key was not found in any active" workaround

Hi All.
Some of you might have this problem when making a UI-Connection "The requested lookup key was not found in any active activation context"
Talking to SAP Support and Gianluigi Bagnoli about the problem here is a sum of the problem and the workaround to prevent it (at least untill SAP development fix the problem)
Some facts:
- The error is present in SBO2005A SP01 and SBO2005B SP00, SBO2007A should not be affected
- The error occur because the SAP client fail to provide the correct/entire connection-string
- The problem is actually an underlying problem from Microsoft (try searching google with the error message)
- Normally after the error occur, you can go to Administration > Add-ons and start the add-on manually without problems
Some additional observations
- The error mostly happen just after startup of a windows machine
- We have had a couple of customers that have had the problem, then upgraded the SAP client to a new patchlevel and got rid of the problem (but we have also had customers where this did not help)
- Seem to be happening more often of slower machines
Workaround
Knowing that this problem is tied to and incorrect connection string is also the "workaround"... What you could do is to create exception handling around the UI connection, and if it fails connection using the development connection string (like you do during development) The connection string is: 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004
Using this method, you will be able to establish a connection even if the client is unable to provide you a correct connectionstring, but the draw-back of this workaround is that the add-on will be indicated as failed in the Add-on Manager and the user is not able to stop the add-on in any way other than disconnection from the company.

Hi,
I am looking for a solution to the error "The requested lookup key was not found in any active activation context" too.
In our add-on we do two SboGuiApi.Connect(sConnectionString), one from MyAddon.exe and the other one from MyAddon.dll. The .exe catches messages and .dll interacts with UI to paint forms etc. It is since the .exe and .dll are not in the same thread. The first connection works fine in the .exe, then that connection string is passed to the dll and the error is raised. The rare thing is why it works fine from the development enviroment, but doesn't work when SAP is starting the Addon?
Is it possible connect twice?
Can we connect in the .exe using the connection string received from SAP and in the .dll using the development connection string?
It is over
Windows XP 2002 SP2
SBO2007A patchlevel 15
VS 2005 C#
SQL Server 2005
Thank you

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice. What now?

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?

Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

Error msg- ME53N tocde "company was not supplied in Function module inte -

Similar Messages

Maybe you are looking for